git/git.git
10 years agoindex-pack: group the delta-base array entries also by type
Junio C Hamano [Wed, 2 Feb 2011 18:06:51 +0000 (10:06 -0800)]
index-pack: group the delta-base array entries also by type

Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte.  The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.

Group the entries also by type to eliminate the potential of false hits.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'jh/push-default-upstream-configname'
Junio C Hamano [Mon, 28 Feb 2011 05:58:31 +0000 (21:58 -0800)]
Merge branch 'jh/push-default-upstream-configname'

* jh/push-default-upstream-configname:
  push.default: Rename 'tracking' to 'upstream'

10 years agoMerge branch 'lp/config-vername-check'
Junio C Hamano [Mon, 28 Feb 2011 05:58:31 +0000 (21:58 -0800)]
Merge branch 'lp/config-vername-check'

* lp/config-vername-check:
  Disallow empty section and variable names
  Sanity-check config variable names

10 years agoMerge branch 'mg/placeholders-are-lowercase'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'mg/placeholders-are-lowercase'

* mg/placeholders-are-lowercase:
  Make <identifier> lowercase in Documentation
  Make <identifier> lowercase as per CodingGuidelines
  Make <identifier> lowercase as per CodingGuidelines
  Make <identifier> lowercase as per CodingGuidelines
  CodingGuidelines: downcase placeholders in usage messages

10 years agoMerge branch 'mg/patch-id'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'mg/patch-id'

* mg/patch-id:
  git-patch-id: do not trip over "no newline" markers
  git-patch-id: test for "no newline" markers

10 years agoMerge branch 'mz/rerere-remaining'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'mz/rerere-remaining'

* mz/rerere-remaining:
  mergetool: don't skip modify/remove conflicts
  rerere "remaining"

10 years agoMerge branch 'nd/sorted-builtin-command-list'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'nd/sorted-builtin-command-list'

* nd/sorted-builtin-command-list:
  git.c: reorder builtin command list

10 years agoMerge branch 'js/maint-merge-use-prepare-commit-msg-hook'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'js/maint-merge-use-prepare-commit-msg-hook'

* js/maint-merge-use-prepare-commit-msg-hook:
  merge: honor prepare-commit-msg hook

10 years agoMerge branch 'nd/hash-object-sanity'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'nd/hash-object-sanity'

* nd/hash-object-sanity:
  Make hash-object more robust against malformed objects

Conflicts:
cache.h

10 years agoMerge branch 'js/detach-doc'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'js/detach-doc'

* js/detach-doc:
  git-checkout.txt: improve detached HEAD documentation

10 years agoMerge branch 'va/p4'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'va/p4'

* va/p4:
  git-p4: Add copy detection support
  git-p4: Improve rename detection support

10 years agoMerge branch 'pw/p4'
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'pw/p4'

* pw/p4:
  git-p4: support clone --bare
  git-p4: decode p4 wildcard characters
  git-p4: better message for "git-p4 sync" when not cloned
  git-p4: reinterpret confusing p4 message
  git-p4: accommodate new move/delete type in p4
  git-p4: add missing newline in initial import message
  git-p4: fix key error for p4 problem
  git-p4: test script

10 years agoMerge branch 'uk/checkout-ambiguous-ref'
Junio C Hamano [Mon, 28 Feb 2011 05:58:29 +0000 (21:58 -0800)]
Merge branch 'uk/checkout-ambiguous-ref'

* uk/checkout-ambiguous-ref:
  Rename t2019 with typo "amiguous" that meant "ambiguous"
  checkout: rearrange update_refs_for_switch for clarity
  checkout: introduce --detach synonym for "git checkout foo^{commit}"
  checkout: split off a function to peel away branchname arg
  checkout: fix bug with ambiguous refs

Conflicts:
builtin/checkout.c

10 years agoMerge branch 'sp/maint-smart-http-sans-100-continue'
Junio C Hamano [Mon, 28 Feb 2011 05:58:29 +0000 (21:58 -0800)]
Merge branch 'sp/maint-smart-http-sans-100-continue'

* sp/maint-smart-http-sans-100-continue:
  smart-http: Don't use Expect: 100-Continue

10 years agoMerge branch 'mo/perl-bidi-pipe-envfix'
Junio C Hamano [Mon, 28 Feb 2011 05:58:28 +0000 (21:58 -0800)]
Merge branch 'mo/perl-bidi-pipe-envfix'

* mo/perl-bidi-pipe-envfix:
  perl: command_bidi_pipe() method should set-up git environmens

10 years agoMerge branch 'hv/mingw-fs-funnies'
Junio C Hamano [Mon, 28 Feb 2011 05:17:37 +0000 (21:17 -0800)]
Merge branch 'hv/mingw-fs-funnies'

* hv/mingw-fs-funnies:
  mingw_rmdir: set errno=ENOTEMPTY when appropriate
  mingw: add fallback for rmdir in case directory is in use
  mingw: make failures to unlink or move raise a question
  mingw: work around irregular failures of unlink on windows
  mingw: move unlink wrapper to mingw.c

10 years agoMerge branch 'en/object-list-with-pathspec'
Junio C Hamano [Mon, 28 Feb 2011 05:17:36 +0000 (21:17 -0800)]
Merge branch 'en/object-list-with-pathspec'

* en/object-list-with-pathspec:
  Add testcases showing how pathspecs are handled with rev-list --objects
  Make rev-list --objects work together with pathspecs

10 years agoMerge branch 'nd/struct-pathspec'
Junio C Hamano [Mon, 28 Feb 2011 05:17:36 +0000 (21:17 -0800)]
Merge branch 'nd/struct-pathspec'

* nd/struct-pathspec: (22 commits)
  t6004: add pathspec globbing test for log family
  t7810: overlapping pathspecs and depth limit
  grep: drop pathspec_matches() in favor of tree_entry_interesting()
  grep: use writable strbuf from caller for grep_tree()
  grep: use match_pathspec_depth() for cache/worktree grepping
  grep: convert to use struct pathspec
  Convert ce_path_match() to use match_pathspec_depth()
  Convert ce_path_match() to use struct pathspec
  struct rev_info: convert prune_data to struct pathspec
  pathspec: add match_pathspec_depth()
  tree_entry_interesting(): optimize wildcard matching when base is matched
  tree_entry_interesting(): support wildcard matching
  tree_entry_interesting(): fix depth limit with overlapping pathspecs
  tree_entry_interesting(): support depth limit
  tree_entry_interesting(): refactor into separate smaller functions
  diff-tree: convert base+baselen to writable strbuf
  glossary: define pathspec
  Move tree_entry_interesting() to tree-walk.c and export it
  tree_entry_interesting(): remove dependency on struct diff_options
  Convert struct diff_options to use struct pathspec
  ...

10 years agogitweb: Make i18n (encoding) tests in t9500 leave clean state
Jakub Narebski [Sun, 27 Feb 2011 16:58:32 +0000 (17:58 +0100)]
gitweb: Make i18n (encoding) tests in t9500 leave clean state

The most important issue is that after unsetting `i18n.commitencoding'
config variable t9500 no longer will use author and comitter name
containing ISO-8859-1 characters, which are invalid UTF-8 characters.

Besides it is good practice in general to clean up the state in tests.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-add: make -A description clearer vs. -u
Michael J Gruber [Sun, 27 Feb 2011 15:50:10 +0000 (16:50 +0100)]
git-add: make -A description clearer vs. -u

Currently, it sounds as if "notice removal of files" distinguishes "-A"
from "-u", and there is no mention of the worktree.

But both notice the removal, and only "-A" adds changes from untracked
files. Say so.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Sun, 27 Feb 2011 08:52:15 +0000 (00:52 -0800)]
Merge branch 'maint'

* maint:
  branch_merged: fix grammar in warning

10 years agobranch_merged: fix grammar in warning
Eric Hanchrow [Sat, 26 Feb 2011 03:29:42 +0000 (19:29 -0800)]
branch_merged: fix grammar in warning

Signed-off-by: Eric Hanchrow <eric.hanchrow@gmail.com>
Helped-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoupdate-index --refresh --porcelain: add missing const
Jonathan Nieder [Tue, 22 Feb 2011 22:43:23 +0000 (22:43 +0000)]
update-index --refresh --porcelain: add missing const

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocheckout: add missing const to describe_detached_head
Jonathan Nieder [Tue, 22 Feb 2011 22:43:22 +0000 (22:43 +0000)]
checkout: add missing const to describe_detached_head

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoDisallow empty section and variable names
Libor Pechacek [Tue, 1 Feb 2011 07:13:47 +0000 (08:13 +0100)]
Disallow empty section and variable names

It is possible to break your repository config by creating an invalid key.  The
config parser in turn chokes on it:

  $ git init
  Initialized empty Git repository in /tmp/gittest/.git/
  $ git config .foo false
  $ git config core.bare
  fatal: bad config file line 6 in .git/config

This patch makes git-config reject keys which start or end with a dot and adds
tests for these cases.

Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoSanity-check config variable names
Libor Pechacek [Sun, 30 Jan 2011 19:40:41 +0000 (20:40 +0100)]
Sanity-check config variable names

Sanity-check config variable names when adding and retrieving them.  As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.

This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.

Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Tue, 22 Feb 2011 06:46:09 +0000 (22:46 -0800)]
Merge branch 'maint'

* maint:
  Documentation: clarify -u<mode> option defaults

10 years agogit-checkout.txt: improve detached HEAD documentation
Jay Soffian [Sun, 20 Feb 2011 05:21:50 +0000 (00:21 -0500)]
git-checkout.txt: improve detached HEAD documentation

The detached HEAD state is a source of much confusion for users
new to git. Here we try to document it better.

Reworked from http://article.gmane.org/gmane.comp.version-control.git/138440

Requested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoDocumentation: clarify -u<mode> option defaults
Clemens Buchacher [Mon, 21 Feb 2011 20:05:25 +0000 (21:05 +0100)]
Documentation: clarify -u<mode> option defaults

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Tue, 22 Feb 2011 01:20:11 +0000 (17:20 -0800)]
Merge branch 'maint'

* maint:
  t/t7500-commit.sh: use test_cmp instead of test
  t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
  gitweb/gitweb.perl: don't call S_ISREG() with undef
  gitweb/gitweb.perl: remove use of qw(...) as parentheses

10 years agogit-p4: Add copy detection support
Vitor Antunes [Sun, 20 Feb 2011 01:18:25 +0000 (01:18 +0000)]
git-p4: Add copy detection support

Add new config options:
    git-p4.detectCopies         - Enable copy detection.
    git-p4.detectCopiesHarder   - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.

Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: Improve rename detection support
Vitor Antunes [Sun, 20 Feb 2011 01:18:24 +0000 (01:18 +0000)]
git-p4: Improve rename detection support

Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.

Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agot/t7500-commit.sh: use test_cmp instead of test
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 18:29:09 +0000 (18:29 +0000)]
t/t7500-commit.sh: use test_cmp instead of test

Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agot/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 18:16:19 +0000 (19:16 +0100)]
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate

Because '--immediate' stops test suite after first error, therefore in
this mode

  test_debug 'cat gitweb.log'

was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.

Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).

This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogitweb/gitweb.perl: don't call S_ISREG() with undef
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 15:27:42 +0000 (15:27 +0000)]
gitweb/gitweb.perl: don't call S_ISREG() with undef

Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.

This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:

     gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.

Which caused the Git test suite to fail on this test:

    ./t9500-gitweb-standalone-no-errors.sh             (Wstat: 256 Tests: 90 Failed: 84)
      Failed tests:  1-8, 10-36, 38-45, 47-48, 50-88
      Non-zero exit status: 1

Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogitweb/gitweb.perl: remove use of qw(...) as parentheses
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 15:27:41 +0000 (15:27 +0000)]
gitweb/gitweb.perl: remove use of qw(...) as parentheses

Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.

The issue is that perl will now warn about this:

    $ perl -wE 'for my $i qw(a b) { say $i }'
    Use of qw(...) as parentheses is deprecated at -e line 1.
    a
    b

This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:

    ./t9501-gitweb-standalone-http-status.sh           (Wstat: 256 Tests: 11 Failed: 10)
      Failed tests:  2-11
      Non-zero exit status: 1
    ./t9502-gitweb-standalone-parse-output.sh          (Wstat: 256 Tests: 10 Failed: 9)
      Failed tests:  2-10
      Non-zero exit status: 1

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: support clone --bare
Pete Wyckoff [Sat, 19 Feb 2011 13:18:01 +0000 (08:18 -0500)]
git-p4: support clone --bare

Just like git clone --bare, build a .git directory but no
checked out files.

Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: decode p4 wildcard characters
Pete Wyckoff [Sat, 19 Feb 2011 13:18:00 +0000 (08:18 -0500)]
git-p4: decode p4 wildcard characters

There are four wildcard characters in p4.  Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.

This patch does the same thing when importing into git,
converting the four special characters.  Without this change,
the files appear with literal %xx in their names.

Be careful not to produce "*" in filenames on windows.  That
will fail.

Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: better message for "git-p4 sync" when not cloned
Pete Wyckoff [Sat, 19 Feb 2011 13:17:59 +0000 (08:17 -0500)]
git-p4: better message for "git-p4 sync" when not cloned

A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone".  There will be no
p4 refs.  The error message in this case is a traceback
for an assertion, which is confusing.

Change it instead to explain the likely problem.

Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: reinterpret confusing p4 message
Pete Wyckoff [Sat, 19 Feb 2011 13:17:58 +0000 (08:17 -0500)]
git-p4: reinterpret confusing p4 message

Error output will look like this:

glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.

This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path:  //deopt

Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: accommodate new move/delete type in p4
Pete Wyckoff [Sat, 19 Feb 2011 13:17:57 +0000 (08:17 -0500)]
git-p4: accommodate new move/delete type in p4

562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.

Instead of replicating the support in three places, hoist the definition
somewhere global.

Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: add missing newline in initial import message
Pete Wyckoff [Sat, 19 Feb 2011 13:17:56 +0000 (08:17 -0500)]
git-p4: add missing newline in initial import message

Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-By: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: fix key error for p4 problem
Pete Wyckoff [Sat, 19 Feb 2011 13:17:55 +0000 (08:17 -0500)]
git-p4: fix key error for p4 problem

Some p4 failures result in an error, but the info['code'] is not
set.  These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.

Make sure the info key exists before using it to avoid a python
traceback.

Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-p4: test script
Pete Wyckoff [Sat, 19 Feb 2011 13:17:54 +0000 (08:17 -0500)]
git-p4: test script

Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-patch-id: do not trip over "no newline" markers
Michael J Gruber [Thu, 17 Feb 2011 07:44:42 +0000 (08:44 +0100)]
git-patch-id: do not trip over "no newline" markers

Currently, patch-id trips over our very own diff extension for marking
the absence of newline at EOF.

Fix it. (Ignore it, it's whitespace.)

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-patch-id: test for "no newline" markers
Michael J Gruber [Wed, 16 Feb 2011 16:55:37 +0000 (17:55 +0100)]
git-patch-id: test for "no newline" markers

Currently, patch-id trips over our very own output that marks the absence
of newline at EOF.

Expose this in a test.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMake <identifier> lowercase in Documentation
Michael J Gruber [Thu, 17 Feb 2011 07:48:06 +0000 (08:48 +0100)]
Make <identifier> lowercase in Documentation

Leaving uppercase abbreviations (e.g. URL) and an identifier named after
an upercase env variable (CVSROOT) in place, this adjusts the few
remaining cases and fixes an unidentified identifier along the way.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Wed, 16 Feb 2011 22:33:22 +0000 (14:33 -0800)]
Merge branch 'maint'

* maint:
  parse_tag_buffer(): do not prefixcmp() out of range

10 years agoMerge branch 'maint-1.7.3' into maint
Junio C Hamano [Wed, 16 Feb 2011 22:33:11 +0000 (14:33 -0800)]
Merge branch 'maint-1.7.3' into maint

* maint-1.7.3:

10 years agoMerge branch 'maint-1.7.2' into maint-1.7.3
Junio C Hamano [Wed, 16 Feb 2011 22:32:59 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.2' into maint-1.7.3

* maint-1.7.2:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

10 years agoMerge branch 'maint-1.7.1' into maint-1.7.2
Junio C Hamano [Wed, 16 Feb 2011 22:32:54 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.1' into maint-1.7.2

* maint-1.7.1:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

10 years agoMerge branch 'maint-1.7.0' into maint-1.7.1
Junio C Hamano [Wed, 16 Feb 2011 22:32:47 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.0' into maint-1.7.1

* maint-1.7.0:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

10 years agomergetool: don't skip modify/remove conflicts
Martin von Zweigbergk [Wed, 16 Feb 2011 10:47:45 +0000 (05:47 -0500)]
mergetool: don't skip modify/remove conflicts

Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.

Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.

 file1: file does not need merging
 Continue merging other unresolved paths (y/n) ?

Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.

Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agorerere "remaining"
Martin von Zweigbergk [Wed, 16 Feb 2011 10:47:44 +0000 (05:47 -0500)]
rerere "remaining"

After "rerere" resolves conflicts by reusing old resolution, there would
be three kinds of paths with conflict in the index:

 * paths that have been resolved in the working tree by rerere;
 * paths that need further work whose resolution could be recorded;
 * paths that need resolving that rerere won't help.

When the user wants a list of paths that need hand-resolving, output from
"rerere status" does not help, as it shows only the second category, but
the paths in the third category still needs work (rerere only makes sense
for regular files that have both our side and their side, and does not
help other kinds of conflicts, e.g. "we modified, they deleted").

The new subcommand "rerere remaining" can be used to show both. As
opposed to "rerere status", this subcommand also skips printing paths
that have been added to the index, since these paths are already
resolved and are no longer "remaining".

Initial patch provided by Junio. Refactored and modified to skip
resolved paths by Martin. Commit message mostly by Junio.

Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agopush.default: Rename 'tracking' to 'upstream'
Johan Herland [Wed, 16 Feb 2011 00:54:24 +0000 (01:54 +0100)]
push.default: Rename 'tracking' to 'upstream'

Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).

When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.

In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.

push.default == 'tracking' is left as a deprecated synonym for 'upstream'.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoparse_tag_buffer(): do not prefixcmp() out of range
Nguyễn Thái Ngọc Duy [Mon, 14 Feb 2011 13:02:51 +0000 (20:02 +0700)]
parse_tag_buffer(): do not prefixcmp() out of range

There is a check (size < 64) at the beginning of the function, but
that only covers object+type lines.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit.c: reorder builtin command list
Nguyễn Thái Ngọc Duy [Tue, 15 Feb 2011 03:09:03 +0000 (10:09 +0700)]
git.c: reorder builtin command list

The majority of commands is in alphabet order except some. Reorder
them so it's easier to locate a command by eye and able to binary
search.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agomerge: honor prepare-commit-msg hook
Jay Soffian [Tue, 15 Feb 2011 01:07:50 +0000 (20:07 -0500)]
merge: honor prepare-commit-msg hook

When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.

Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMake <identifier> lowercase as per CodingGuidelines
Michael J Gruber [Tue, 15 Feb 2011 13:09:13 +0000 (14:09 +0100)]
Make <identifier> lowercase as per CodingGuidelines

*.c part for matches with '<[A-Z]+>' (and affected test).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMake <identifier> lowercase as per CodingGuidelines
Michael J Gruber [Tue, 15 Feb 2011 13:09:12 +0000 (14:09 +0100)]
Make <identifier> lowercase as per CodingGuidelines

*.c part for matches with '"[A-Z]+"'.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMake <identifier> lowercase as per CodingGuidelines
Michael J Gruber [Tue, 15 Feb 2011 13:09:11 +0000 (14:09 +0100)]
Make <identifier> lowercase as per CodingGuidelines

parse-options part

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoCodingGuidelines: downcase placeholders in usage messages
Junio C Hamano [Tue, 15 Feb 2011 19:02:56 +0000 (11:02 -0800)]
CodingGuidelines: downcase placeholders in usage messages

We accumulated some inconsistencies without an explicit guidance to spell
this out over time.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agosmart-http: Don't use Expect: 100-Continue
Shawn O. Pearce [Tue, 15 Feb 2011 16:57:24 +0000 (08:57 -0800)]
smart-http: Don't use Expect: 100-Continue

Some HTTP/1.1 servers or proxies don't correctly implement the
100-Continue feature of HTTP/1.1.  Its a difficult feature to
implement right, and isn't commonly used by browsers, so many
developers may not even be aware that their server (or proxy)
doesn't honor it.

Within the smart HTTP protocol for Git we only use this newer
"Expect: 100-Continue" feature to probe for missing authentication
before uploading a large payload like a pack file during push.
If authentication is necessary, we expect the server to send the
401 Not Authorized response before the bulk data transfer starts,
thus saving the client bandwidth during the retry.

A different method to probe for working authentication is to send an
empty command list (that is just "0000") to $URL/git-receive-pack.
or $URL/git-upload-pack.  All versions of both receive-pack and
upload-pack since the introduction of smart HTTP in Git 1.6.6
cleanly accept just a flush-pkt under --stateless-rpc mode, and
exit with success.

If HTTP level authentication is successful, the backend will return
an empty response, but with HTTP status code 200.  This enables
the client to continue with the transfer.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Tue, 15 Feb 2011 19:03:22 +0000 (11:03 -0800)]
Merge branch 'maint'

* maint:
  pull: do not display fetch usage on --help-all
  git-tag.txt: list all modes in the description
  commit,status: describe -u likewise
  add: describe --patch like checkout, reset
  commit,merge,tag: describe -m likewise
  clone,init: describe --template using the same wording
  commit,status: describe --porcelain just like push
  commit,tag: use same wording for -F
  configure: use AC_LANG_PROGRAM consistently
  string_list_append: always set util pointer to NULL
  correct type of EMPTY_TREE_SHA1_BIN

10 years agopull: do not display fetch usage on --help-all
Michael J Gruber [Mon, 14 Feb 2011 16:48:08 +0000 (17:48 +0100)]
pull: do not display fetch usage on --help-all

Currently, "git pull --help-all" displays the fetch usage info.

Make it equivalent to "git pull -h" instead since "--help-all" is
documented in gitcli(7).

Do not try to sanitize the pull option parser (aka last hair puller).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogit-tag.txt: list all modes in the description
Michael J Gruber [Tue, 15 Feb 2011 13:09:10 +0000 (14:09 +0100)]
git-tag.txt: list all modes in the description

Currently, the description sounds as if it applied always, but most of
its content is true in "create tag mode" only.

Make this clearer by listing all modes upfront.

Also, sneak in some linguistic improvements and make it clearer that
lightweight tags are "created" because "written" may be misread as
"are output".

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocommit,status: describe -u likewise
Michael J Gruber [Tue, 15 Feb 2011 13:09:09 +0000 (14:09 +0100)]
commit,status: describe -u likewise

They differ by one character only. Being exactly equal should help
translations.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoadd: describe --patch like checkout, reset
Michael J Gruber [Tue, 15 Feb 2011 13:09:08 +0000 (14:09 +0100)]
add: describe --patch like checkout, reset

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocommit,merge,tag: describe -m likewise
Michael J Gruber [Tue, 15 Feb 2011 13:09:07 +0000 (14:09 +0100)]
commit,merge,tag: describe -m likewise

This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoclone,init: describe --template using the same wording
Michael J Gruber [Tue, 15 Feb 2011 13:09:06 +0000 (14:09 +0100)]
clone,init: describe --template using the same wording

This also corrects a wrong description for clone.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocommit,status: describe --porcelain just like push
Michael J Gruber [Tue, 15 Feb 2011 13:09:05 +0000 (14:09 +0100)]
commit,status: describe --porcelain just like push

Push has the clearer description, so take that one for all.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocommit,tag: use same wording for -F
Michael J Gruber [Tue, 15 Feb 2011 13:09:04 +0000 (14:09 +0100)]
commit,tag: use same wording for -F

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoRevert "unpack_trees(): skip trees that are the same in all input"
Junio C Hamano [Tue, 15 Feb 2011 18:47:04 +0000 (10:47 -0800)]
Revert "unpack_trees(): skip trees that are the same in all input"

This reverts commit 83c90314aa27ae3768c04375d02e4f3fb12b726d, which
seems to have broken merge to report conflicts when there should be
none.

10 years agoRename t2019 with typo "amiguous" that meant "ambiguous"
Junio C Hamano [Tue, 15 Feb 2011 18:43:45 +0000 (10:43 -0800)]
Rename t2019 with typo "amiguous" that meant "ambiguous"

Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoperl: command_bidi_pipe() method should set-up git environmens
Masatake Osanai [Mon, 14 Feb 2011 22:13:04 +0000 (07:13 +0900)]
perl: command_bidi_pipe() method should set-up git environmens

When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.

command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up.  Because of this, a program that did this
did not work as expected:

    my $repo = Git->repository(Directory => '/some/where/else');
    my ($pid, $in, $out, $ctx) =
    $repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));

This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.

Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.

Signed-off-by: Masatake Osanai <unpush@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoconfigure: use AC_LANG_PROGRAM consistently
Ralf Wildenhues [Sun, 2 Jan 2011 10:24:55 +0000 (11:24 +0100)]
configure: use AC_LANG_PROGRAM consistently

Avoid warnings from Autoconf 2.68 about missing use of AC_LANG_PROGRAM
and friends.

Quoting autoconf-2.68/NEWS:

  ** The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and
     AC_RUN_IFELSE now warn if the first argument failed to use
     AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file
     contents.  A new macro AC_LANG_DEFINES_PROVIDED exists if you have
     a compelling reason why you cannot use AC_LANG_SOURCE but must
     avoid the warning.

The underlying reason for that change is that AC_LANG_{SOURCE,PROGRAM}
take care to supply the previously computed set of #defines (and
include standard headers if so desired) for preprocessed languages
like C and C++.

In some cases, AC_LANG_PROGRAM is already used but not sufficiently
m4-quoted, so we just need to add another set of [quotes] to prevent
the autoconf warning from being triggered bogusly.  Quoting all
arguments (except when calling special macros that need to be expanded
before recursion) is better style, anyway.  These and more rules are
described in detail in 'info Autoconf "Programming in M4"'.

No change in the resulting config.mak.autogen after running
./configure intended.

Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agostring_list_append: always set util pointer to NULL
Jeff King [Sat, 12 Feb 2011 05:18:51 +0000 (00:18 -0500)]
string_list_append: always set util pointer to NULL

It is not immediately obvious that the util field may
contain random bytes after appending an item. Especially
since the string_list_insert* functions _do_ explicitly zero
the util pointer.

This does not appear to be a bug in any current git code, as
all callers either fill in the util field immediately or
never use it. However, it is worth it to be less surprising
to new users of the string-list API who may expect it to be
intialized to NULL.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agocorrect type of EMPTY_TREE_SHA1_BIN
Jonathan Nieder [Mon, 7 Feb 2011 08:17:27 +0000 (02:17 -0600)]
correct type of EMPTY_TREE_SHA1_BIN

Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake.  Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast.  Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.

In the future the definition might change to

extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoObey p4 views when using client spec
Ian Wienand [Sat, 12 Feb 2011 00:33:48 +0000 (16:33 -0800)]
Obey p4 views when using client spec

When using the p4 client spec, this attempts to obey the client's
output preferences.

For example, a view like

//depot/foo/branch/... //client/branch/foo/...
//depot/bar/branch/... //client/branch/bar/...

will result in a directory layout in the git tree of

branch/
branch/foo
branch/bar

p4 can do various other reordering that this change doesn't support,
but we should detect it and at least fail nicely.

Signed-off-by: Ian Wienand <ianw@vmware.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Acked-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agogitignore: add test-mktemp to ignore list
Ævar Arnfjörð Bjarmason [Sat, 12 Feb 2011 23:21:17 +0000 (23:21 +0000)]
gitignore: add test-mktemp to ignore list

Change the .gitignore to ignore test-mktemp which is built from
test-mktemp.c. Arnout Engelen added this in 6cf6bb3 (Improve error
messages when temporary file creation fails, 2010-12-18) but forgot
to add a corresponding entry to .gitignore.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agorepo-config: add deprecation warning
René Scharfe [Sat, 12 Feb 2011 13:24:10 +0000 (14:24 +0100)]
repo-config: add deprecation warning

repo-config was deprecated in 5c66d0d4 on 2008-01-17.  Warn the
remaining users that it has been replaced by config and is going to
be removed eventually.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Sat, 12 Feb 2011 00:01:47 +0000 (16:01 -0800)]
Merge branch 'maint'

* maint:
  Git 1.7.4.1
  clone: fixup recurse_submodules option
  svn-fe: warn about experimental status

Conflicts:
contrib/examples/git-revert.sh
contrib/svn-fe/svn-fe.txt

10 years agoGit 1.7.4.1 v1.7.4.1
Junio C Hamano [Fri, 11 Feb 2011 22:39:55 +0000 (14:39 -0800)]
Git 1.7.4.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'jc/fsck-fixes' into maint
Junio C Hamano [Fri, 11 Feb 2011 22:26:10 +0000 (14:26 -0800)]
Merge branch 'jc/fsck-fixes' into maint

* jc/fsck-fixes:
  fsck: do not give up too early in fsck_dir()
  fsck: drop unused parameter from traverse_one_object()

10 years agoclone: fixup recurse_submodules option
Chris Packham [Thu, 10 Feb 2011 22:59:31 +0000 (11:59 +1300)]
clone: fixup recurse_submodules option

The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agosvn-fe: warn about experimental status
Jonathan Nieder [Fri, 11 Feb 2011 10:36:44 +0000 (04:36 -0600)]
svn-fe: warn about experimental status

svn-fe is young and some coming cleanups might involve backward
incompatible UI changes.  Add some words of warning to the manual so
early adopters that are not following the project closely don't get
burned.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'maint'
Junio C Hamano [Thu, 10 Feb 2011 22:45:55 +0000 (14:45 -0800)]
Merge branch 'maint'

* maint:
  compat: helper for detecting unsigned overflow

10 years agocompat: helper for detecting unsigned overflow
Jonathan Nieder [Mon, 11 Oct 2010 02:59:26 +0000 (21:59 -0500)]
compat: helper for detecting unsigned overflow

The idiom (a + b < a) works fine for detecting that an unsigned
integer has overflowed, but a more explicit

unsigned_add_overflows(a, b)

might be easier to read.

Define such a macro, expanding roughly to ((a) < UINT_MAX - (b)).
Because the expansion uses each argument only once outside of sizeof()
expressions, it is safe to use with arguments that have side effects.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10 years agoMerge branch 'tr/merge-unborn-clobber'
Junio C Hamano [Thu, 10 Feb 2011 00:41:17 +0000 (16:41 -0800)]
Merge branch 'tr/merge-unborn-clobber'

* tr/merge-unborn-clobber:
  Exhibit merge bug that clobbers index&WT

Conflicts:
t/t7607-merge-overwrite.sh

10 years agoMerge branch 'jc/unpack-trees'
Junio C Hamano [Thu, 10 Feb 2011 00:41:17 +0000 (16:41 -0800)]
Merge branch 'jc/unpack-trees'

* jc/unpack-trees:
  unpack_trees(): skip trees that are the same in all input
  unpack-trees.c: cosmetic fix

Conflicts:
unpack-trees.c

10 years agoMerge branch 'jc/fsck-fixes'
Junio C Hamano [Thu, 10 Feb 2011 00:41:17 +0000 (16:41 -0800)]
Merge branch 'jc/fsck-fixes'

* jc/fsck-fixes:
  fsck: do not give up too early in fsck_dir()
  fsck: drop unused parameter from traverse_one_object()

10 years agoMerge branch 'tr/diff-words-test'
Junio C Hamano [Thu, 10 Feb 2011 00:41:17 +0000 (16:41 -0800)]
Merge branch 'tr/diff-words-test'

* tr/diff-words-test:
  t4034 (diff --word-diff): add a minimum Perl drier test vector
  t4034 (diff --word-diff): style suggestions
  userdiff: simplify word-diff safeguard
  t4034: bulk verify builtin word regex sanity

10 years agoMerge branch 'rr/fi-import-marks-if-exists'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'rr/fi-import-marks-if-exists'

* rr/fi-import-marks-if-exists:
  fast-import: Introduce --import-marks-if-exists

10 years agoMerge branch 'jn/unpack-lstat-failure-report'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'jn/unpack-lstat-failure-report'

* jn/unpack-lstat-failure-report:
  unpack-trees: handle lstat failure for existing file
  unpack-trees: handle lstat failure for existing directory

10 years agoMerge branch 'ef/alias-via-run-command'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'ef/alias-via-run-command'

* ef/alias-via-run-command:
  alias: use run_command api to execute aliases

10 years agoMerge branch 'cb/setup'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'cb/setup'

* cb/setup:
  setup: translate symlinks in filename when using absolute paths

10 years agoMerge branch 'ae/better-template-failure-report'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'ae/better-template-failure-report'

* ae/better-template-failure-report:
  Improve error messages when temporary file creation fails

10 years agoMerge branch 'jn/cherry-pick-strategy-option'
Junio C Hamano [Thu, 10 Feb 2011 00:41:16 +0000 (16:41 -0800)]
Merge branch 'jn/cherry-pick-strategy-option'

* jn/cherry-pick-strategy-option:
  cherry-pick/revert: add support for -X/--strategy-option

10 years agoMerge branch 'maint-1.7.0' into maint
Junio C Hamano [Thu, 10 Feb 2011 00:40:12 +0000 (16:40 -0800)]
Merge branch 'maint-1.7.0' into maint

* maint-1.7.0:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

Conflicts:
Documentation/git-fast-import.txt

10 years agofast-import: introduce "feature notes" command
Jonathan Nieder [Wed, 9 Feb 2011 22:43:57 +0000 (16:43 -0600)]
fast-import: introduce "feature notes" command

Here is a 'feature' command for streams to use to require support for
the notemodify (N) command.

When the 'feature' facility was introduced (v1.7.0-rc0~95^2~4,
2009-12-04), the notes import feature was old news (v1.6.6-rc0~21^2~8,
2009-10-09) and it was not obvious it deserved to be a named feature.
But now that is clear, since all major non-git fast-import backends
lack support for it.

Details: on git version with this patch applied, any "feature notes"
command in the features/options section at the beginning of a stream
will be treated as a no-op.  On fast-import implementations without
the feature (and older git versions), the command instead errors out
with a message like

This version of fast-import does not support feature notes.

So by declaring use of notes at the beginning of a stream, frontends
can avoid wasting time and other resources when the backend does not
support notes.  (This would be especially important for backends that
do not support rewinding history after a botched import.)

Improved-by: Thomas Rast <trast@student.ethz.ch>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>