git-submodule.txt: quote usage in monospace, drop backslash
[git/git.git] / Documentation / config.txt
1 CONFIGURATION FILE
2 ------------------
3
4 The Git configuration file contains a number of variables that affect
5 the Git commands' behavior. The `.git/config` file in each repository
6 is used to store the configuration for that repository, and
7 `$HOME/.gitconfig` is used to store a per-user configuration as
8 fallback values for the `.git/config` file. The file `/etc/gitconfig`
9 can be used to store a system-wide default configuration.
10
11 The configuration variables are used by both the Git plumbing
12 and the porcelains. The variables are divided into sections, wherein
13 the fully qualified variable name of the variable itself is the last
14 dot-separated segment and the section name is everything before the last
15 dot. The variable names are case-insensitive, allow only alphanumeric
16 characters and `-`, and must start with an alphabetic character. Some
17 variables may appear multiple times; we say then that the variable is
18 multivalued.
19
20 Syntax
21 ~~~~~~
22
23 The syntax is fairly flexible and permissive; whitespaces are mostly
24 ignored. The '#' and ';' characters begin comments to the end of line,
25 blank lines are ignored.
26
27 The file consists of sections and variables. A section begins with
28 the name of the section in square brackets and continues until the next
29 section begins. Section names are case-insensitive. Only alphanumeric
30 characters, `-` and `.` are allowed in section names. Each variable
31 must belong to some section, which means that there must be a section
32 header before the first setting of a variable.
33
34 Sections can be further divided into subsections. To begin a subsection
35 put its name in double quotes, separated by space from the section name,
36 in the section header, like in the example below:
37
38 --------
39 [section "subsection"]
40
41 --------
42
43 Subsection names are case sensitive and can contain any characters except
44 newline and the null byte. Doublequote `"` and backslash can be included
45 by escaping them as `\"` and `\\`, respectively. Backslashes preceding
46 other characters are dropped when reading; for example, `\t` is read as
47 `t` and `\0` is read as `0` Section headers cannot span multiple lines.
48 Variables may belong directly to a section or to a given subsection. You
49 can have `[section]` if you have `[section "subsection"]`, but you don't
50 need to.
51
52 There is also a deprecated `[section.subsection]` syntax. With this
53 syntax, the subsection name is converted to lower-case and is also
54 compared case sensitively. These subsection names follow the same
55 restrictions as section names.
56
57 All the other lines (and the remainder of the line after the section
58 header) are recognized as setting variables, in the form
59 'name = value' (or just 'name', which is a short-hand to say that
60 the variable is the boolean "true").
61 The variable names are case-insensitive, allow only alphanumeric characters
62 and `-`, and must start with an alphabetic character.
63
64 A line that defines a value can be continued to the next line by
65 ending it with a `\`; the backquote and the end-of-line are
66 stripped. Leading whitespaces after 'name =', the remainder of the
67 line after the first comment character '#' or ';', and trailing
68 whitespaces of the line are discarded unless they are enclosed in
69 double quotes. Internal whitespaces within the value are retained
70 verbatim.
71
72 Inside double quotes, double quote `"` and backslash `\` characters
73 must be escaped: use `\"` for `"` and `\\` for `\`.
74
75 The following escape sequences (beside `\"` and `\\`) are recognized:
76 `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
77 and `\b` for backspace (BS). Other char escape sequences (including octal
78 escape sequences) are invalid.
79
80
81 Includes
82 ~~~~~~~~
83
84 The `include` and `includeIf` sections allow you to include config
85 directives from another source. These sections behave identically to
86 each other with the exception that `includeIf` sections may be ignored
87 if their condition does not evaluate to true; see "Conditional includes"
88 below.
89
90 You can include a config file from another by setting the special
91 `include.path` (or `includeIf.*.path`) variable to the name of the file
92 to be included. The variable takes a pathname as its value, and is
93 subject to tilde expansion. These variables can be given multiple times.
94
95 The contents of the included file are inserted immediately, as if they
96 had been found at the location of the include directive. If the value of the
97 variable is a relative path, the path is considered to
98 be relative to the configuration file in which the include directive
99 was found. See below for examples.
100
101 Conditional includes
102 ~~~~~~~~~~~~~~~~~~~~
103
104 You can include a config file from another conditionally by setting a
105 `includeIf.<condition>.path` variable to the name of the file to be
106 included.
107
108 The condition starts with a keyword followed by a colon and some data
109 whose format and meaning depends on the keyword. Supported keywords
110 are:
111
112 `gitdir`::
113
114 The data that follows the keyword `gitdir:` is used as a glob
115 pattern. If the location of the .git directory matches the
116 pattern, the include condition is met.
117 +
118 The .git location may be auto-discovered, or come from `$GIT_DIR`
119 environment variable. If the repository is auto discovered via a .git
120 file (e.g. from submodules, or a linked worktree), the .git location
121 would be the final location where the .git directory is, not where the
122 .git file is.
123 +
124 The pattern can contain standard globbing wildcards and two additional
125 ones, `**/` and `/**`, that can match multiple path components. Please
126 refer to linkgit:gitignore[5] for details. For convenience:
127
128 * If the pattern starts with `~/`, `~` will be substituted with the
129 content of the environment variable `HOME`.
130
131 * If the pattern starts with `./`, it is replaced with the directory
132 containing the current config file.
133
134 * If the pattern does not start with either `~/`, `./` or `/`, `**/`
135 will be automatically prepended. For example, the pattern `foo/bar`
136 becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
137
138 * If the pattern ends with `/`, `**` will be automatically added. For
139 example, the pattern `foo/` becomes `foo/**`. In other words, it
140 matches "foo" and everything inside, recursively.
141
142 `gitdir/i`::
143 This is the same as `gitdir` except that matching is done
144 case-insensitively (e.g. on case-insensitive file sytems)
145
146 A few more notes on matching via `gitdir` and `gitdir/i`:
147
148 * Symlinks in `$GIT_DIR` are not resolved before matching.
149
150 * Both the symlink & realpath versions of paths will be matched
151 outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
152 /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
153 will match.
154 +
155 This was not the case in the initial release of this feature in
156 v2.13.0, which only matched the realpath version. Configuration that
157 wants to be compatible with the initial release of this feature needs
158 to either specify only the realpath version, or both versions.
159
160 * Note that "../" is not special and will match literally, which is
161 unlikely what you want.
162
163 Example
164 ~~~~~~~
165
166 # Core variables
167 [core]
168 ; Don't trust file modes
169 filemode = false
170
171 # Our diff algorithm
172 [diff]
173 external = /usr/local/bin/diff-wrapper
174 renames = true
175
176 [branch "devel"]
177 remote = origin
178 merge = refs/heads/devel
179
180 # Proxy settings
181 [core]
182 gitProxy="ssh" for "kernel.org"
183 gitProxy=default-proxy ; for the rest
184
185 [include]
186 path = /path/to/foo.inc ; include by absolute path
187 path = foo.inc ; find "foo.inc" relative to the current file
188 path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
189
190 ; include if $GIT_DIR is /path/to/foo/.git
191 [includeIf "gitdir:/path/to/foo/.git"]
192 path = /path/to/foo.inc
193
194 ; include for all repositories inside /path/to/group
195 [includeIf "gitdir:/path/to/group/"]
196 path = /path/to/foo.inc
197
198 ; include for all repositories inside $HOME/to/group
199 [includeIf "gitdir:~/to/group/"]
200 path = /path/to/foo.inc
201
202 ; relative paths are always relative to the including
203 ; file (if the condition is true); their location is not
204 ; affected by the condition
205 [includeIf "gitdir:/path/to/group/"]
206 path = foo.inc
207
208 Values
209 ~~~~~~
210
211 Values of many variables are treated as a simple string, but there
212 are variables that take values of specific types and there are rules
213 as to how to spell them.
214
215 boolean::
216
217 When a variable is said to take a boolean value, many
218 synonyms are accepted for 'true' and 'false'; these are all
219 case-insensitive.
220
221 true;; Boolean true literals are `yes`, `on`, `true`,
222 and `1`. Also, a variable defined without `= <value>`
223 is taken as true.
224
225 false;; Boolean false literals are `no`, `off`, `false`,
226 `0` and the empty string.
227 +
228 When converting value to the canonical form using `--bool` type
229 specifier, 'git config' will ensure that the output is "true" or
230 "false" (spelled in lowercase).
231
232 integer::
233 The value for many variables that specify various sizes can
234 be suffixed with `k`, `M`,... to mean "scale the number by
235 1024", "by 1024x1024", etc.
236
237 color::
238 The value for a variable that takes a color is a list of
239 colors (at most two, one for foreground and one for background)
240 and attributes (as many as you want), separated by spaces.
241 +
242 The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
243 `blue`, `magenta`, `cyan` and `white`. The first color given is the
244 foreground; the second is the background.
245 +
246 Colors may also be given as numbers between 0 and 255; these use ANSI
247 256-color mode (but note that not all terminals may support this). If
248 your terminal supports it, you may also specify 24-bit RGB values as
249 hex, like `#ff0ab3`.
250 +
251 The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
252 `italic`, and `strike` (for crossed-out or "strikethrough" letters).
253 The position of any attributes with respect to the colors
254 (before, after, or in between), doesn't matter. Specific attributes may
255 be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
256 `no-ul`, etc).
257 +
258 An empty color string produces no color effect at all. This can be used
259 to avoid coloring specific elements without disabling color entirely.
260 +
261 For git's pre-defined color slots, the attributes are meant to be reset
262 at the beginning of each item in the colored output. So setting
263 `color.decorate.branch` to `black` will paint that branch name in a
264 plain `black`, even if the previous thing on the same output line (e.g.
265 opening parenthesis before the list of branch names in `log --decorate`
266 output) is set to be painted with `bold` or some other attribute.
267 However, custom log formats may do more complicated and layered
268 coloring, and the negated forms may be useful there.
269
270 pathname::
271 A variable that takes a pathname value can be given a
272 string that begins with "`~/`" or "`~user/`", and the usual
273 tilde expansion happens to such a string: `~/`
274 is expanded to the value of `$HOME`, and `~user/` to the
275 specified user's home directory.
276
277
278 Variables
279 ~~~~~~~~~
280
281 Note that this list is non-comprehensive and not necessarily complete.
282 For command-specific variables, you will find a more detailed description
283 in the appropriate manual page.
284
285 Other git-related tools may and do use their own variables. When
286 inventing new variables for use in your own tool, make sure their
287 names do not conflict with those that are used by Git itself and
288 other popular tools, and describe them in your documentation.
289
290
291 advice.*::
292 These variables control various optional help messages designed to
293 aid new users. All 'advice.*' variables default to 'true', and you
294 can tell Git that you do not need help by setting these to 'false':
295 +
296 --
297 pushUpdateRejected::
298 Set this variable to 'false' if you want to disable
299 'pushNonFFCurrent',
300 'pushNonFFMatching', 'pushAlreadyExists',
301 'pushFetchFirst', and 'pushNeedsForce'
302 simultaneously.
303 pushNonFFCurrent::
304 Advice shown when linkgit:git-push[1] fails due to a
305 non-fast-forward update to the current branch.
306 pushNonFFMatching::
307 Advice shown when you ran linkgit:git-push[1] and pushed
308 'matching refs' explicitly (i.e. you used ':', or
309 specified a refspec that isn't your current branch) and
310 it resulted in a non-fast-forward error.
311 pushAlreadyExists::
312 Shown when linkgit:git-push[1] rejects an update that
313 does not qualify for fast-forwarding (e.g., a tag.)
314 pushFetchFirst::
315 Shown when linkgit:git-push[1] rejects an update that
316 tries to overwrite a remote ref that points at an
317 object we do not have.
318 pushNeedsForce::
319 Shown when linkgit:git-push[1] rejects an update that
320 tries to overwrite a remote ref that points at an
321 object that is not a commit-ish, or make the remote
322 ref point at an object that is not a commit-ish.
323 statusHints::
324 Show directions on how to proceed from the current
325 state in the output of linkgit:git-status[1], in
326 the template shown when writing commit messages in
327 linkgit:git-commit[1], and in the help message shown
328 by linkgit:git-checkout[1] when switching branch.
329 statusUoption::
330 Advise to consider using the `-u` option to linkgit:git-status[1]
331 when the command takes more than 2 seconds to enumerate untracked
332 files.
333 commitBeforeMerge::
334 Advice shown when linkgit:git-merge[1] refuses to
335 merge to avoid overwriting local changes.
336 resolveConflict::
337 Advice shown by various commands when conflicts
338 prevent the operation from being performed.
339 implicitIdentity::
340 Advice on how to set your identity configuration when
341 your information is guessed from the system username and
342 domain name.
343 detachedHead::
344 Advice shown when you used linkgit:git-checkout[1] to
345 move to the detach HEAD state, to instruct how to create
346 a local branch after the fact.
347 amWorkDir::
348 Advice that shows the location of the patch file when
349 linkgit:git-am[1] fails to apply it.
350 rmHints::
351 In case of failure in the output of linkgit:git-rm[1],
352 show directions on how to proceed from the current state.
353 addEmbeddedRepo::
354 Advice on what to do when you've accidentally added one
355 git repo inside of another.
356 ignoredHook::
357 Advice shown if an hook is ignored because the hook is not
358 set as executable.
359 waitingForEditor::
360 Print a message to the terminal whenever Git is waiting for
361 editor input from the user.
362 --
363
364 core.fileMode::
365 Tells Git if the executable bit of files in the working tree
366 is to be honored.
367 +
368 Some filesystems lose the executable bit when a file that is
369 marked as executable is checked out, or checks out a
370 non-executable file with executable bit on.
371 linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
372 to see if it handles the executable bit correctly
373 and this variable is automatically set as necessary.
374 +
375 A repository, however, may be on a filesystem that handles
376 the filemode correctly, and this variable is set to 'true'
377 when created, but later may be made accessible from another
378 environment that loses the filemode (e.g. exporting ext4 via
379 CIFS mount, visiting a Cygwin created repository with
380 Git for Windows or Eclipse).
381 In such a case it may be necessary to set this variable to 'false'.
382 See linkgit:git-update-index[1].
383 +
384 The default is true (when core.filemode is not specified in the config file).
385
386 core.hideDotFiles::
387 (Windows-only) If true, mark newly-created directories and files whose
388 name starts with a dot as hidden. If 'dotGitOnly', only the `.git/`
389 directory is hidden, but no other files starting with a dot. The
390 default mode is 'dotGitOnly'.
391
392 core.ignoreCase::
393 If true, this option enables various workarounds to enable
394 Git to work better on filesystems that are not case sensitive,
395 like FAT. For example, if a directory listing finds
396 "makefile" when Git expects "Makefile", Git will assume
397 it is really the same file, and continue to remember it as
398 "Makefile".
399 +
400 The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
401 will probe and set core.ignoreCase true if appropriate when the repository
402 is created.
403
404 core.precomposeUnicode::
405 This option is only used by Mac OS implementation of Git.
406 When core.precomposeUnicode=true, Git reverts the unicode decomposition
407 of filenames done by Mac OS. This is useful when sharing a repository
408 between Mac OS and Linux or Windows.
409 (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
410 When false, file names are handled fully transparent by Git,
411 which is backward compatible with older versions of Git.
412
413 core.protectHFS::
414 If set to true, do not allow checkout of paths that would
415 be considered equivalent to `.git` on an HFS+ filesystem.
416 Defaults to `true` on Mac OS, and `false` elsewhere.
417
418 core.protectNTFS::
419 If set to true, do not allow checkout of paths that would
420 cause problems with the NTFS filesystem, e.g. conflict with
421 8.3 "short" names.
422 Defaults to `true` on Windows, and `false` elsewhere.
423
424 core.fsmonitor::
425 If set, the value of this variable is used as a command which
426 will identify all files that may have changed since the
427 requested date/time. This information is used to speed up git by
428 avoiding unnecessary processing of files that have not changed.
429 See the "fsmonitor-watchman" section of linkgit:githooks[5].
430
431 core.trustctime::
432 If false, the ctime differences between the index and the
433 working tree are ignored; useful when the inode change time
434 is regularly modified by something outside Git (file system
435 crawlers and some backup systems).
436 See linkgit:git-update-index[1]. True by default.
437
438 core.splitIndex::
439 If true, the split-index feature of the index will be used.
440 See linkgit:git-update-index[1]. False by default.
441
442 core.untrackedCache::
443 Determines what to do about the untracked cache feature of the
444 index. It will be kept, if this variable is unset or set to
445 `keep`. It will automatically be added if set to `true`. And
446 it will automatically be removed, if set to `false`. Before
447 setting it to `true`, you should check that mtime is working
448 properly on your system.
449 See linkgit:git-update-index[1]. `keep` by default.
450
451 core.checkStat::
452 Determines which stat fields to match between the index
453 and work tree. The user can set this to 'default' or
454 'minimal'. Default (or explicitly 'default'), is to check
455 all fields, including the sub-second part of mtime and ctime.
456
457 core.quotePath::
458 Commands that output paths (e.g. 'ls-files', 'diff'), will
459 quote "unusual" characters in the pathname by enclosing the
460 pathname in double-quotes and escaping those characters with
461 backslashes in the same way C escapes control characters (e.g.
462 `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with
463 values larger than 0x80 (e.g. octal `\302\265` for "micro" in
464 UTF-8). If this variable is set to false, bytes higher than
465 0x80 are not considered "unusual" any more. Double-quotes,
466 backslash and control characters are always escaped regardless
467 of the setting of this variable. A simple space character is
468 not considered "unusual". Many commands can output pathnames
469 completely verbatim using the `-z` option. The default value
470 is true.
471
472 core.eol::
473 Sets the line ending type to use in the working directory for
474 files that have the `text` property set when core.autocrlf is false.
475 Alternatives are 'lf', 'crlf' and 'native', which uses the platform's
476 native line ending. The default value is `native`. See
477 linkgit:gitattributes[5] for more information on end-of-line
478 conversion.
479
480 core.safecrlf::
481 If true, makes Git check if converting `CRLF` is reversible when
482 end-of-line conversion is active. Git will verify if a command
483 modifies a file in the work tree either directly or indirectly.
484 For example, committing a file followed by checking out the
485 same file should yield the original file in the work tree. If
486 this is not the case for the current setting of
487 `core.autocrlf`, Git will reject the file. The variable can
488 be set to "warn", in which case Git will only warn about an
489 irreversible conversion but continue the operation.
490 +
491 CRLF conversion bears a slight chance of corrupting data.
492 When it is enabled, Git will convert CRLF to LF during commit and LF to
493 CRLF during checkout. A file that contains a mixture of LF and
494 CRLF before the commit cannot be recreated by Git. For text
495 files this is the right thing to do: it corrects line endings
496 such that we have only LF line endings in the repository.
497 But for binary files that are accidentally classified as text the
498 conversion can corrupt data.
499 +
500 If you recognize such corruption early you can easily fix it by
501 setting the conversion type explicitly in .gitattributes. Right
502 after committing you still have the original file in your work
503 tree and this file is not yet corrupted. You can explicitly tell
504 Git that this file is binary and Git will handle the file
505 appropriately.
506 +
507 Unfortunately, the desired effect of cleaning up text files with
508 mixed line endings and the undesired effect of corrupting binary
509 files cannot be distinguished. In both cases CRLFs are removed
510 in an irreversible way. For text files this is the right thing
511 to do because CRLFs are line endings, while for binary files
512 converting CRLFs corrupts data.
513 +
514 Note, this safety check does not mean that a checkout will generate a
515 file identical to the original file for a different setting of
516 `core.eol` and `core.autocrlf`, but only for the current one. For
517 example, a text file with `LF` would be accepted with `core.eol=lf`
518 and could later be checked out with `core.eol=crlf`, in which case the
519 resulting file would contain `CRLF`, although the original file
520 contained `LF`. However, in both work trees the line endings would be
521 consistent, that is either all `LF` or all `CRLF`, but never mixed. A
522 file with mixed line endings would be reported by the `core.safecrlf`
523 mechanism.
524
525 core.autocrlf::
526 Setting this variable to "true" is the same as setting
527 the `text` attribute to "auto" on all files and core.eol to "crlf".
528 Set to true if you want to have `CRLF` line endings in your
529 working directory and the repository has LF line endings.
530 This variable can be set to 'input',
531 in which case no output conversion is performed.
532
533 core.symlinks::
534 If false, symbolic links are checked out as small plain files that
535 contain the link text. linkgit:git-update-index[1] and
536 linkgit:git-add[1] will not change the recorded type to regular
537 file. Useful on filesystems like FAT that do not support
538 symbolic links.
539 +
540 The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
541 will probe and set core.symlinks false if appropriate when the repository
542 is created.
543
544 core.gitProxy::
545 A "proxy command" to execute (as 'command host port') instead
546 of establishing direct connection to the remote server when
547 using the Git protocol for fetching. If the variable value is
548 in the "COMMAND for DOMAIN" format, the command is applied only
549 on hostnames ending with the specified domain string. This variable
550 may be set multiple times and is matched in the given order;
551 the first match wins.
552 +
553 Can be overridden by the `GIT_PROXY_COMMAND` environment variable
554 (which always applies universally, without the special "for"
555 handling).
556 +
557 The special string `none` can be used as the proxy command to
558 specify that no proxy be used for a given domain pattern.
559 This is useful for excluding servers inside a firewall from
560 proxy use, while defaulting to a common proxy for external domains.
561
562 core.sshCommand::
563 If this variable is set, `git fetch` and `git push` will
564 use the specified command instead of `ssh` when they need to
565 connect to a remote system. The command is in the same form as
566 the `GIT_SSH_COMMAND` environment variable and is overridden
567 when the environment variable is set.
568
569 core.ignoreStat::
570 If true, Git will avoid using lstat() calls to detect if files have
571 changed by setting the "assume-unchanged" bit for those tracked files
572 which it has updated identically in both the index and working tree.
573 +
574 When files are modified outside of Git, the user will need to stage
575 the modified files explicitly (e.g. see 'Examples' section in
576 linkgit:git-update-index[1]).
577 Git will not normally detect changes to those files.
578 +
579 This is useful on systems where lstat() calls are very slow, such as
580 CIFS/Microsoft Windows.
581 +
582 False by default.
583
584 core.preferSymlinkRefs::
585 Instead of the default "symref" format for HEAD
586 and other symbolic reference files, use symbolic links.
587 This is sometimes needed to work with old scripts that
588 expect HEAD to be a symbolic link.
589
590 core.bare::
591 If true this repository is assumed to be 'bare' and has no
592 working directory associated with it. If this is the case a
593 number of commands that require a working directory will be
594 disabled, such as linkgit:git-add[1] or linkgit:git-merge[1].
595 +
596 This setting is automatically guessed by linkgit:git-clone[1] or
597 linkgit:git-init[1] when the repository was created. By default a
598 repository that ends in "/.git" is assumed to be not bare (bare =
599 false), while all other repositories are assumed to be bare (bare
600 = true).
601
602 core.worktree::
603 Set the path to the root of the working tree.
604 If `GIT_COMMON_DIR` environment variable is set, core.worktree
605 is ignored and not used for determining the root of working tree.
606 This can be overridden by the `GIT_WORK_TREE` environment
607 variable and the `--work-tree` command-line option.
608 The value can be an absolute path or relative to the path to
609 the .git directory, which is either specified by --git-dir
610 or GIT_DIR, or automatically discovered.
611 If --git-dir or GIT_DIR is specified but none of
612 --work-tree, GIT_WORK_TREE and core.worktree is specified,
613 the current working directory is regarded as the top level
614 of your working tree.
615 +
616 Note that this variable is honored even when set in a configuration
617 file in a ".git" subdirectory of a directory and its value differs
618 from the latter directory (e.g. "/path/to/.git/config" has
619 core.worktree set to "/different/path"), which is most likely a
620 misconfiguration. Running Git commands in the "/path/to" directory will
621 still use "/different/path" as the root of the work tree and can cause
622 confusion unless you know what you are doing (e.g. you are creating a
623 read-only snapshot of the same index to a location different from the
624 repository's usual working tree).
625
626 core.logAllRefUpdates::
627 Enable the reflog. Updates to a ref <ref> is logged to the file
628 "`$GIT_DIR/logs/<ref>`", by appending the new and old
629 SHA-1, the date/time and the reason of the update, but
630 only when the file exists. If this configuration
631 variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`"
632 file is automatically created for branch heads (i.e. under
633 `refs/heads/`), remote refs (i.e. under `refs/remotes/`),
634 note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`.
635 If it is set to `always`, then a missing reflog is automatically
636 created for any ref under `refs/`.
637 +
638 This information can be used to determine what commit
639 was the tip of a branch "2 days ago".
640 +
641 This value is true by default in a repository that has
642 a working directory associated with it, and false by
643 default in a bare repository.
644
645 core.repositoryFormatVersion::
646 Internal variable identifying the repository format and layout
647 version.
648
649 core.sharedRepository::
650 When 'group' (or 'true'), the repository is made shareable between
651 several users in a group (making sure all the files and objects are
652 group-writable). When 'all' (or 'world' or 'everybody'), the
653 repository will be readable by all users, additionally to being
654 group-shareable. When 'umask' (or 'false'), Git will use permissions
655 reported by umask(2). When '0xxx', where '0xxx' is an octal number,
656 files in the repository will have this mode value. '0xxx' will override
657 user's umask value (whereas the other options will only override
658 requested parts of the user's umask value). Examples: '0660' will make
659 the repo read/write-able for the owner and group, but inaccessible to
660 others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
661 repository that is group-readable but not group-writable.
662 See linkgit:git-init[1]. False by default.
663
664 core.warnAmbiguousRefs::
665 If true, Git will warn you if the ref name you passed it is ambiguous
666 and might match multiple refs in the repository. True by default.
667
668 core.compression::
669 An integer -1..9, indicating a default compression level.
670 -1 is the zlib default. 0 means no compression,
671 and 1..9 are various speed/size tradeoffs, 9 being slowest.
672 If set, this provides a default to other compression variables,
673 such as `core.looseCompression` and `pack.compression`.
674
675 core.looseCompression::
676 An integer -1..9, indicating the compression level for objects that
677 are not in a pack file. -1 is the zlib default. 0 means no
678 compression, and 1..9 are various speed/size tradeoffs, 9 being
679 slowest. If not set, defaults to core.compression. If that is
680 not set, defaults to 1 (best speed).
681
682 core.packedGitWindowSize::
683 Number of bytes of a pack file to map into memory in a
684 single mapping operation. Larger window sizes may allow
685 your system to process a smaller number of large pack files
686 more quickly. Smaller window sizes will negatively affect
687 performance due to increased calls to the operating system's
688 memory manager, but may improve performance when accessing
689 a large number of large pack files.
690 +
691 Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
692 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
693 be reasonable for all users/operating systems. You probably do
694 not need to adjust this value.
695 +
696 Common unit suffixes of 'k', 'm', or 'g' are supported.
697
698 core.packedGitLimit::
699 Maximum number of bytes to map simultaneously into memory
700 from pack files. If Git needs to access more than this many
701 bytes at once to complete an operation it will unmap existing
702 regions to reclaim virtual address space within the process.
703 +
704 Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
705 unlimited) on 64 bit platforms.
706 This should be reasonable for all users/operating systems, except on
707 the largest projects. You probably do not need to adjust this value.
708 +
709 Common unit suffixes of 'k', 'm', or 'g' are supported.
710
711 core.deltaBaseCacheLimit::
712 Maximum number of bytes to reserve for caching base objects
713 that may be referenced by multiple deltified objects. By storing the
714 entire decompressed base objects in a cache Git is able
715 to avoid unpacking and decompressing frequently used base
716 objects multiple times.
717 +
718 Default is 96 MiB on all platforms. This should be reasonable
719 for all users/operating systems, except on the largest projects.
720 You probably do not need to adjust this value.
721 +
722 Common unit suffixes of 'k', 'm', or 'g' are supported.
723
724 core.bigFileThreshold::
725 Files larger than this size are stored deflated, without
726 attempting delta compression. Storing large files without
727 delta compression avoids excessive memory usage, at the
728 slight expense of increased disk usage. Additionally files
729 larger than this size are always treated as binary.
730 +
731 Default is 512 MiB on all platforms. This should be reasonable
732 for most projects as source code and other text files can still
733 be delta compressed, but larger binary media files won't be.
734 +
735 Common unit suffixes of 'k', 'm', or 'g' are supported.
736
737 core.excludesFile::
738 Specifies the pathname to the file that contains patterns to
739 describe paths that are not meant to be tracked, in addition
740 to '.gitignore' (per-directory) and '.git/info/exclude'.
741 Defaults to `$XDG_CONFIG_HOME/git/ignore`.
742 If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore`
743 is used instead. See linkgit:gitignore[5].
744
745 core.askPass::
746 Some commands (e.g. svn and http interfaces) that interactively
747 ask for a password can be told to use an external program given
748 via the value of this variable. Can be overridden by the `GIT_ASKPASS`
749 environment variable. If not set, fall back to the value of the
750 `SSH_ASKPASS` environment variable or, failing that, a simple password
751 prompt. The external program shall be given a suitable prompt as
752 command-line argument and write the password on its STDOUT.
753
754 core.attributesFile::
755 In addition to '.gitattributes' (per-directory) and
756 '.git/info/attributes', Git looks into this file for attributes
757 (see linkgit:gitattributes[5]). Path expansions are made the same
758 way as for `core.excludesFile`. Its default value is
759 `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not
760 set or empty, `$HOME/.config/git/attributes` is used instead.
761
762 core.hooksPath::
763 By default Git will look for your hooks in the
764 '$GIT_DIR/hooks' directory. Set this to different path,
765 e.g. '/etc/git/hooks', and Git will try to find your hooks in
766 that directory, e.g. '/etc/git/hooks/pre-receive' instead of
767 in '$GIT_DIR/hooks/pre-receive'.
768 +
769 The path can be either absolute or relative. A relative path is
770 taken as relative to the directory where the hooks are run (see
771 the "DESCRIPTION" section of linkgit:githooks[5]).
772 +
773 This configuration variable is useful in cases where you'd like to
774 centrally configure your Git hooks instead of configuring them on a
775 per-repository basis, or as a more flexible and centralized
776 alternative to having an `init.templateDir` where you've changed
777 default hooks.
778
779 core.editor::
780 Commands such as `commit` and `tag` that let you edit
781 messages by launching an editor use the value of this
782 variable when it is set, and the environment variable
783 `GIT_EDITOR` is not set. See linkgit:git-var[1].
784
785 core.commentChar::
786 Commands such as `commit` and `tag` that let you edit
787 messages consider a line that begins with this character
788 commented, and removes them after the editor returns
789 (default '#').
790 +
791 If set to "auto", `git-commit` would select a character that is not
792 the beginning character of any line in existing commit messages.
793
794 core.filesRefLockTimeout::
795 The length of time, in milliseconds, to retry when trying to
796 lock an individual reference. Value 0 means not to retry at
797 all; -1 means to try indefinitely. Default is 100 (i.e.,
798 retry for 100ms).
799
800 core.packedRefsTimeout::
801 The length of time, in milliseconds, to retry when trying to
802 lock the `packed-refs` file. Value 0 means not to retry at
803 all; -1 means to try indefinitely. Default is 1000 (i.e.,
804 retry for 1 second).
805
806 sequence.editor::
807 Text editor used by `git rebase -i` for editing the rebase instruction file.
808 The value is meant to be interpreted by the shell when it is used.
809 It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
810 When not configured the default commit message editor is used instead.
811
812 core.pager::
813 Text viewer for use by Git commands (e.g., 'less'). The value
814 is meant to be interpreted by the shell. The order of preference
815 is the `$GIT_PAGER` environment variable, then `core.pager`
816 configuration, then `$PAGER`, and then the default chosen at
817 compile time (usually 'less').
818 +
819 When the `LESS` environment variable is unset, Git sets it to `FRX`
820 (if `LESS` environment variable is set, Git does not change it at
821 all). If you want to selectively override Git's default setting
822 for `LESS`, you can set `core.pager` to e.g. `less -S`. This will
823 be passed to the shell by Git, which will translate the final
824 command to `LESS=FRX less -S`. The environment does not set the
825 `S` option but the command line does, instructing less to truncate
826 long lines. Similarly, setting `core.pager` to `less -+F` will
827 deactivate the `F` option specified by the environment from the
828 command-line, deactivating the "quit if one screen" behavior of
829 `less`. One can specifically activate some flags for particular
830 commands: for example, setting `pager.blame` to `less -S` enables
831 line truncation only for `git blame`.
832 +
833 Likewise, when the `LV` environment variable is unset, Git sets it
834 to `-c`. You can override this setting by exporting `LV` with
835 another value or setting `core.pager` to `lv +c`.
836
837 core.whitespace::
838 A comma separated list of common whitespace problems to
839 notice. 'git diff' will use `color.diff.whitespace` to
840 highlight them, and 'git apply --whitespace=error' will
841 consider them as errors. You can prefix `-` to disable
842 any of them (e.g. `-trailing-space`):
843 +
844 * `blank-at-eol` treats trailing whitespaces at the end of the line
845 as an error (enabled by default).
846 * `space-before-tab` treats a space character that appears immediately
847 before a tab character in the initial indent part of the line as an
848 error (enabled by default).
849 * `indent-with-non-tab` treats a line that is indented with space
850 characters instead of the equivalent tabs as an error (not enabled by
851 default).
852 * `tab-in-indent` treats a tab character in the initial indent part of
853 the line as an error (not enabled by default).
854 * `blank-at-eof` treats blank lines added at the end of file as an error
855 (enabled by default).
856 * `trailing-space` is a short-hand to cover both `blank-at-eol` and
857 `blank-at-eof`.
858 * `cr-at-eol` treats a carriage-return at the end of line as
859 part of the line terminator, i.e. with it, `trailing-space`
860 does not trigger if the character before such a carriage-return
861 is not a whitespace (not enabled by default).
862 * `tabwidth=<n>` tells how many character positions a tab occupies; this
863 is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
864 errors. The default tab width is 8. Allowed values are 1 to 63.
865
866 core.fsyncObjectFiles::
867 This boolean will enable 'fsync()' when writing object files.
868 +
869 This is a total waste of time and effort on a filesystem that orders
870 data writes properly, but can be useful for filesystems that do not use
871 journalling (traditional UNIX filesystems) or that only journal metadata
872 and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
873
874 core.preloadIndex::
875 Enable parallel index preload for operations like 'git diff'
876 +
877 This can speed up operations like 'git diff' and 'git status' especially
878 on filesystems like NFS that have weak caching semantics and thus
879 relatively high IO latencies. When enabled, Git will do the
880 index comparison to the filesystem data in parallel, allowing
881 overlapping IO's. Defaults to true.
882
883 core.createObject::
884 You can set this to 'link', in which case a hardlink followed by
885 a delete of the source are used to make sure that object creation
886 will not overwrite existing objects.
887 +
888 On some file system/operating system combinations, this is unreliable.
889 Set this config setting to 'rename' there; However, This will remove the
890 check that makes sure that existing object files will not get overwritten.
891
892 core.notesRef::
893 When showing commit messages, also show notes which are stored in
894 the given ref. The ref must be fully qualified. If the given
895 ref does not exist, it is not an error but means that no
896 notes should be printed.
897 +
898 This setting defaults to "refs/notes/commits", and it can be overridden by
899 the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1].
900
901 core.sparseCheckout::
902 Enable "sparse checkout" feature. See section "Sparse checkout" in
903 linkgit:git-read-tree[1] for more information.
904
905 core.abbrev::
906 Set the length object names are abbreviated to. If
907 unspecified or set to "auto", an appropriate value is
908 computed based on the approximate number of packed objects
909 in your repository, which hopefully is enough for
910 abbreviated object names to stay unique for some time.
911 The minimum length is 4.
912
913 add.ignoreErrors::
914 add.ignore-errors (deprecated)::
915 Tells 'git add' to continue adding files when some files cannot be
916 added due to indexing errors. Equivalent to the `--ignore-errors`
917 option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
918 as it does not follow the usual naming convention for configuration
919 variables.
920
921 alias.*::
922 Command aliases for the linkgit:git[1] command wrapper - e.g.
923 after defining "alias.last = cat-file commit HEAD", the invocation
924 "git last" is equivalent to "git cat-file commit HEAD". To avoid
925 confusion and troubles with script usage, aliases that
926 hide existing Git commands are ignored. Arguments are split by
927 spaces, the usual shell quoting and escaping is supported.
928 A quote pair or a backslash can be used to quote them.
929 +
930 If the alias expansion is prefixed with an exclamation point,
931 it will be treated as a shell command. For example, defining
932 "alias.new = !gitk --all --not ORIG_HEAD", the invocation
933 "git new" is equivalent to running the shell command
934 "gitk --all --not ORIG_HEAD". Note that shell commands will be
935 executed from the top-level directory of a repository, which may
936 not necessarily be the current directory.
937 `GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix'
938 from the original current directory. See linkgit:git-rev-parse[1].
939
940 am.keepcr::
941 If true, git-am will call git-mailsplit for patches in mbox format
942 with parameter `--keep-cr`. In this case git-mailsplit will
943 not remove `\r` from lines ending with `\r\n`. Can be overridden
944 by giving `--no-keep-cr` from the command line.
945 See linkgit:git-am[1], linkgit:git-mailsplit[1].
946
947 am.threeWay::
948 By default, `git am` will fail if the patch does not apply cleanly. When
949 set to true, this setting tells `git am` to fall back on 3-way merge if
950 the patch records the identity of blobs it is supposed to apply to and
951 we have those blobs available locally (equivalent to giving the `--3way`
952 option from the command line). Defaults to `false`.
953 See linkgit:git-am[1].
954
955 apply.ignoreWhitespace::
956 When set to 'change', tells 'git apply' to ignore changes in
957 whitespace, in the same way as the `--ignore-space-change`
958 option.
959 When set to one of: no, none, never, false tells 'git apply' to
960 respect all whitespace differences.
961 See linkgit:git-apply[1].
962
963 apply.whitespace::
964 Tells 'git apply' how to handle whitespaces, in the same way
965 as the `--whitespace` option. See linkgit:git-apply[1].
966
967 blame.showRoot::
968 Do not treat root commits as boundaries in linkgit:git-blame[1].
969 This option defaults to false.
970
971 blame.blankBoundary::
972 Show blank commit object name for boundary commits in
973 linkgit:git-blame[1]. This option defaults to false.
974
975 blame.showEmail::
976 Show the author email instead of author name in linkgit:git-blame[1].
977 This option defaults to false.
978
979 blame.date::
980 Specifies the format used to output dates in linkgit:git-blame[1].
981 If unset the iso format is used. For supported values,
982 see the discussion of the `--date` option at linkgit:git-log[1].
983
984 branch.autoSetupMerge::
985 Tells 'git branch' and 'git checkout' to set up new branches
986 so that linkgit:git-pull[1] will appropriately merge from the
987 starting point branch. Note that even if this option is not set,
988 this behavior can be chosen per-branch using the `--track`
989 and `--no-track` options. The valid settings are: `false` -- no
990 automatic setup is done; `true` -- automatic setup is done when the
991 starting point is a remote-tracking branch; `always` --
992 automatic setup is done when the starting point is either a
993 local branch or remote-tracking
994 branch. This option defaults to true.
995
996 branch.autoSetupRebase::
997 When a new branch is created with 'git branch' or 'git checkout'
998 that tracks another branch, this variable tells Git to set
999 up pull to rebase instead of merge (see "branch.<name>.rebase").
1000 When `never`, rebase is never automatically set to true.
1001 When `local`, rebase is set to true for tracked branches of
1002 other local branches.
1003 When `remote`, rebase is set to true for tracked branches of
1004 remote-tracking branches.
1005 When `always`, rebase will be set to true for all tracking
1006 branches.
1007 See "branch.autoSetupMerge" for details on how to set up a
1008 branch to track another branch.
1009 This option defaults to never.
1010
1011 branch.<name>.remote::
1012 When on branch <name>, it tells 'git fetch' and 'git push'
1013 which remote to fetch from/push to. The remote to push to
1014 may be overridden with `remote.pushDefault` (for all branches).
1015 The remote to push to, for the current branch, may be further
1016 overridden by `branch.<name>.pushRemote`. If no remote is
1017 configured, or if you are not on any branch, it defaults to
1018 `origin` for fetching and `remote.pushDefault` for pushing.
1019 Additionally, `.` (a period) is the current local repository
1020 (a dot-repository), see `branch.<name>.merge`'s final note below.
1021
1022 branch.<name>.pushRemote::
1023 When on branch <name>, it overrides `branch.<name>.remote` for
1024 pushing. It also overrides `remote.pushDefault` for pushing
1025 from branch <name>. When you pull from one place (e.g. your
1026 upstream) and push to another place (e.g. your own publishing
1027 repository), you would want to set `remote.pushDefault` to
1028 specify the remote to push to for all branches, and use this
1029 option to override it for a specific branch.
1030
1031 branch.<name>.merge::
1032 Defines, together with branch.<name>.remote, the upstream branch
1033 for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
1034 branch to merge and can also affect 'git push' (see push.default).
1035 When in branch <name>, it tells 'git fetch' the default
1036 refspec to be marked for merging in FETCH_HEAD. The value is
1037 handled like the remote part of a refspec, and must match a
1038 ref which is fetched from the remote given by
1039 "branch.<name>.remote".
1040 The merge information is used by 'git pull' (which at first calls
1041 'git fetch') to lookup the default branch for merging. Without
1042 this option, 'git pull' defaults to merge the first refspec fetched.
1043 Specify multiple values to get an octopus merge.
1044 If you wish to setup 'git pull' so that it merges into <name> from
1045 another branch in the local repository, you can point
1046 branch.<name>.merge to the desired branch, and use the relative path
1047 setting `.` (a period) for branch.<name>.remote.
1048
1049 branch.<name>.mergeOptions::
1050 Sets default options for merging into branch <name>. The syntax and
1051 supported options are the same as those of linkgit:git-merge[1], but
1052 option values containing whitespace characters are currently not
1053 supported.
1054
1055 branch.<name>.rebase::
1056 When true, rebase the branch <name> on top of the fetched branch,
1057 instead of merging the default branch from the default remote when
1058 "git pull" is run. See "pull.rebase" for doing this in a non
1059 branch-specific manner.
1060 +
1061 When preserve, also pass `--preserve-merges` along to 'git rebase'
1062 so that locally committed merge commits will not be flattened
1063 by running 'git pull'.
1064 +
1065 When the value is `interactive`, the rebase is run in interactive mode.
1066 +
1067 *NOTE*: this is a possibly dangerous operation; do *not* use
1068 it unless you understand the implications (see linkgit:git-rebase[1]
1069 for details).
1070
1071 branch.<name>.description::
1072 Branch description, can be edited with
1073 `git branch --edit-description`. Branch description is
1074 automatically added in the format-patch cover letter or
1075 request-pull summary.
1076
1077 browser.<tool>.cmd::
1078 Specify the command to invoke the specified browser. The
1079 specified command is evaluated in shell with the URLs passed
1080 as arguments. (See linkgit:git-web{litdd}browse[1].)
1081
1082 browser.<tool>.path::
1083 Override the path for the given tool that may be used to
1084 browse HTML help (see `-w` option in linkgit:git-help[1]) or a
1085 working repository in gitweb (see linkgit:git-instaweb[1]).
1086
1087 clean.requireForce::
1088 A boolean to make git-clean do nothing unless given -f,
1089 -i or -n. Defaults to true.
1090
1091 color.branch::
1092 A boolean to enable/disable color in the output of
1093 linkgit:git-branch[1]. May be set to `always`,
1094 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1095 only when the output is to a terminal. If unset, then the
1096 value of `color.ui` is used (`auto` by default).
1097
1098 color.branch.<slot>::
1099 Use customized color for branch coloration. `<slot>` is one of
1100 `current` (the current branch), `local` (a local branch),
1101 `remote` (a remote-tracking branch in refs/remotes/),
1102 `upstream` (upstream tracking branch), `plain` (other
1103 refs).
1104
1105 color.diff::
1106 Whether to use ANSI escape sequences to add color to patches.
1107 If this is set to `always`, linkgit:git-diff[1],
1108 linkgit:git-log[1], and linkgit:git-show[1] will use color
1109 for all patches. If it is set to `true` or `auto`, those
1110 commands will only use color when output is to the terminal.
1111 If unset, then the value of `color.ui` is used (`auto` by
1112 default).
1113 +
1114 This does not affect linkgit:git-format-patch[1] or the
1115 'git-diff-{asterisk}' plumbing commands. Can be overridden on the
1116 command line with the `--color[=<when>]` option.
1117
1118 diff.colorMoved::
1119 If set to either a valid `<mode>` or a true value, moved lines
1120 in a diff are colored differently, for details of valid modes
1121 see '--color-moved' in linkgit:git-diff[1]. If simply set to
1122 true the default color mode will be used. When set to false,
1123 moved lines are not colored.
1124
1125 color.diff.<slot>::
1126 Use customized color for diff colorization. `<slot>` specifies
1127 which part of the patch to use the specified color, and is one
1128 of `context` (context text - `plain` is a historical synonym),
1129 `meta` (metainformation), `frag`
1130 (hunk header), 'func' (function in hunk header), `old` (removed lines),
1131 `new` (added lines), `commit` (commit headers), `whitespace`
1132 (highlighting whitespace errors), `oldMoved` (deleted lines),
1133 `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
1134 `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
1135 and `newMovedAlternativeDimmed` (See the '<mode>'
1136 setting of '--color-moved' in linkgit:git-diff[1] for details).
1137
1138 color.decorate.<slot>::
1139 Use customized color for 'git log --decorate' output. `<slot>` is one
1140 of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
1141 branches, remote-tracking branches, tags, stash and HEAD, respectively.
1142
1143 color.grep::
1144 When set to `always`, always highlight matches. When `false` (or
1145 `never`), never. When set to `true` or `auto`, use color only
1146 when the output is written to the terminal. If unset, then the
1147 value of `color.ui` is used (`auto` by default).
1148
1149 color.grep.<slot>::
1150 Use customized color for grep colorization. `<slot>` specifies which
1151 part of the line to use the specified color, and is one of
1152 +
1153 --
1154 `context`;;
1155 non-matching text in context lines (when using `-A`, `-B`, or `-C`)
1156 `filename`;;
1157 filename prefix (when not using `-h`)
1158 `function`;;
1159 function name lines (when using `-p`)
1160 `linenumber`;;
1161 line number prefix (when using `-n`)
1162 `match`;;
1163 matching text (same as setting `matchContext` and `matchSelected`)
1164 `matchContext`;;
1165 matching text in context lines
1166 `matchSelected`;;
1167 matching text in selected lines
1168 `selected`;;
1169 non-matching text in selected lines
1170 `separator`;;
1171 separators between fields on a line (`:`, `-`, and `=`)
1172 and between hunks (`--`)
1173 --
1174
1175 color.interactive::
1176 When set to `always`, always use colors for interactive prompts
1177 and displays (such as those used by "git-add --interactive" and
1178 "git-clean --interactive"). When false (or `never`), never.
1179 When set to `true` or `auto`, use colors only when the output is
1180 to the terminal. If unset, then the value of `color.ui` is
1181 used (`auto` by default).
1182
1183 color.interactive.<slot>::
1184 Use customized color for 'git add --interactive' and 'git clean
1185 --interactive' output. `<slot>` may be `prompt`, `header`, `help`
1186 or `error`, for four distinct types of normal output from
1187 interactive commands.
1188
1189 color.pager::
1190 A boolean to enable/disable colored output when the pager is in
1191 use (default is true).
1192
1193 color.showBranch::
1194 A boolean to enable/disable color in the output of
1195 linkgit:git-show-branch[1]. May be set to `always`,
1196 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1197 only when the output is to a terminal. If unset, then the
1198 value of `color.ui` is used (`auto` by default).
1199
1200 color.status::
1201 A boolean to enable/disable color in the output of
1202 linkgit:git-status[1]. May be set to `always`,
1203 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1204 only when the output is to a terminal. If unset, then the
1205 value of `color.ui` is used (`auto` by default).
1206
1207 color.status.<slot>::
1208 Use customized color for status colorization. `<slot>` is
1209 one of `header` (the header text of the status message),
1210 `added` or `updated` (files which are added but not committed),
1211 `changed` (files which are changed but not added in the index),
1212 `untracked` (files which are not tracked by Git),
1213 `branch` (the current branch),
1214 `nobranch` (the color the 'no branch' warning is shown in, defaulting
1215 to red),
1216 `localBranch` or `remoteBranch` (the local and remote branch names,
1217 respectively, when branch and tracking information is displayed in the
1218 status short-format), or
1219 `unmerged` (files which have unmerged changes).
1220
1221 color.ui::
1222 This variable determines the default value for variables such
1223 as `color.diff` and `color.grep` that control the use of color
1224 per command family. Its scope will expand as more commands learn
1225 configuration to set a default for the `--color` option. Set it
1226 to `false` or `never` if you prefer Git commands not to use
1227 color unless enabled explicitly with some other configuration
1228 or the `--color` option. Set it to `always` if you want all
1229 output not intended for machine consumption to use color, to
1230 `true` or `auto` (this is the default since Git 1.8.4) if you
1231 want such output to use color when written to the terminal.
1232
1233 column.ui::
1234 Specify whether supported commands should output in columns.
1235 This variable consists of a list of tokens separated by spaces
1236 or commas:
1237 +
1238 These options control when the feature should be enabled
1239 (defaults to 'never'):
1240 +
1241 --
1242 `always`;;
1243 always show in columns
1244 `never`;;
1245 never show in columns
1246 `auto`;;
1247 show in columns if the output is to the terminal
1248 --
1249 +
1250 These options control layout (defaults to 'column'). Setting any
1251 of these implies 'always' if none of 'always', 'never', or 'auto' are
1252 specified.
1253 +
1254 --
1255 `column`;;
1256 fill columns before rows
1257 `row`;;
1258 fill rows before columns
1259 `plain`;;
1260 show in one column
1261 --
1262 +
1263 Finally, these options can be combined with a layout option (defaults
1264 to 'nodense'):
1265 +
1266 --
1267 `dense`;;
1268 make unequal size columns to utilize more space
1269 `nodense`;;
1270 make equal size columns
1271 --
1272
1273 column.branch::
1274 Specify whether to output branch listing in `git branch` in columns.
1275 See `column.ui` for details.
1276
1277 column.clean::
1278 Specify the layout when list items in `git clean -i`, which always
1279 shows files and directories in columns. See `column.ui` for details.
1280
1281 column.status::
1282 Specify whether to output untracked files in `git status` in columns.
1283 See `column.ui` for details.
1284
1285 column.tag::
1286 Specify whether to output tag listing in `git tag` in columns.
1287 See `column.ui` for details.
1288
1289 commit.cleanup::
1290 This setting overrides the default of the `--cleanup` option in
1291 `git commit`. See linkgit:git-commit[1] for details. Changing the
1292 default can be useful when you always want to keep lines that begin
1293 with comment character `#` in your log message, in which case you
1294 would do `git config commit.cleanup whitespace` (note that you will
1295 have to remove the help lines that begin with `#` in the commit log
1296 template yourself, if you do this).
1297
1298 commit.gpgSign::
1299
1300 A boolean to specify whether all commits should be GPG signed.
1301 Use of this option when doing operations such as rebase can
1302 result in a large number of commits being signed. It may be
1303 convenient to use an agent to avoid typing your GPG passphrase
1304 several times.
1305
1306 commit.status::
1307 A boolean to enable/disable inclusion of status information in the
1308 commit message template when using an editor to prepare the commit
1309 message. Defaults to true.
1310
1311 commit.template::
1312 Specify the pathname of a file to use as the template for
1313 new commit messages.
1314
1315 commit.verbose::
1316 A boolean or int to specify the level of verbose with `git commit`.
1317 See linkgit:git-commit[1].
1318
1319 credential.helper::
1320 Specify an external helper to be called when a username or
1321 password credential is needed; the helper may consult external
1322 storage to avoid prompting the user for the credentials. Note
1323 that multiple helpers may be defined. See linkgit:gitcredentials[7]
1324 for details.
1325
1326 credential.useHttpPath::
1327 When acquiring credentials, consider the "path" component of an http
1328 or https URL to be important. Defaults to false. See
1329 linkgit:gitcredentials[7] for more information.
1330
1331 credential.username::
1332 If no username is set for a network authentication, use this username
1333 by default. See credential.<context>.* below, and
1334 linkgit:gitcredentials[7].
1335
1336 credential.<url>.*::
1337 Any of the credential.* options above can be applied selectively to
1338 some credentials. For example "credential.https://example.com.username"
1339 would set the default username only for https connections to
1340 example.com. See linkgit:gitcredentials[7] for details on how URLs are
1341 matched.
1342
1343 credentialCache.ignoreSIGHUP::
1344 Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting.
1345
1346 include::diff-config.txt[]
1347
1348 difftool.<tool>.path::
1349 Override the path for the given tool. This is useful in case
1350 your tool is not in the PATH.
1351
1352 difftool.<tool>.cmd::
1353 Specify the command to invoke the specified diff tool.
1354 The specified command is evaluated in shell with the following
1355 variables available: 'LOCAL' is set to the name of the temporary
1356 file containing the contents of the diff pre-image and 'REMOTE'
1357 is set to the name of the temporary file containing the contents
1358 of the diff post-image.
1359
1360 difftool.prompt::
1361 Prompt before each invocation of the diff tool.
1362
1363 fastimport.unpackLimit::
1364 If the number of objects imported by linkgit:git-fast-import[1]
1365 is below this limit, then the objects will be unpacked into
1366 loose object files. However if the number of imported objects
1367 equals or exceeds this limit then the pack will be stored as a
1368 pack. Storing the pack from a fast-import can make the import
1369 operation complete faster, especially on slow filesystems. If
1370 not set, the value of `transfer.unpackLimit` is used instead.
1371
1372 fetch.recurseSubmodules::
1373 This option can be either set to a boolean value or to 'on-demand'.
1374 Setting it to a boolean changes the behavior of fetch and pull to
1375 unconditionally recurse into submodules when set to true or to not
1376 recurse at all when set to false. When set to 'on-demand' (the default
1377 value), fetch and pull will only recurse into a populated submodule
1378 when its superproject retrieves a commit that updates the submodule's
1379 reference.
1380
1381 fetch.fsckObjects::
1382 If it is set to true, git-fetch-pack will check all fetched
1383 objects. It will abort in the case of a malformed object or a
1384 broken link. The result of an abort are only dangling objects.
1385 Defaults to false. If not set, the value of `transfer.fsckObjects`
1386 is used instead.
1387
1388 fetch.unpackLimit::
1389 If the number of objects fetched over the Git native
1390 transfer is below this
1391 limit, then the objects will be unpacked into loose object
1392 files. However if the number of received objects equals or
1393 exceeds this limit then the received pack will be stored as
1394 a pack, after adding any missing delta bases. Storing the
1395 pack from a push can make the push operation complete faster,
1396 especially on slow filesystems. If not set, the value of
1397 `transfer.unpackLimit` is used instead.
1398
1399 fetch.prune::
1400 If true, fetch will automatically behave as if the `--prune`
1401 option was given on the command line. See also `remote.<name>.prune`
1402 and the PRUNING section of linkgit:git-fetch[1].
1403
1404 fetch.pruneTags::
1405 If true, fetch will automatically behave as if the
1406 `refs/tags/*:refs/tags/*` refspec was provided when pruning,
1407 if not set already. This allows for setting both this option
1408 and `fetch.prune` to maintain a 1=1 mapping to upstream
1409 refs. See also `remote.<name>.pruneTags` and the PRUNING
1410 section of linkgit:git-fetch[1].
1411
1412 fetch.output::
1413 Control how ref update status is printed. Valid values are
1414 `full` and `compact`. Default value is `full`. See section
1415 OUTPUT in linkgit:git-fetch[1] for detail.
1416
1417 format.attach::
1418 Enable multipart/mixed attachments as the default for
1419 'format-patch'. The value can also be a double quoted string
1420 which will enable attachments as the default and set the
1421 value as the boundary. See the --attach option in
1422 linkgit:git-format-patch[1].
1423
1424 format.from::
1425 Provides the default value for the `--from` option to format-patch.
1426 Accepts a boolean value, or a name and email address. If false,
1427 format-patch defaults to `--no-from`, using commit authors directly in
1428 the "From:" field of patch mails. If true, format-patch defaults to
1429 `--from`, using your committer identity in the "From:" field of patch
1430 mails and including a "From:" field in the body of the patch mail if
1431 different. If set to a non-boolean value, format-patch uses that
1432 value instead of your committer identity. Defaults to false.
1433
1434 format.numbered::
1435 A boolean which can enable or disable sequence numbers in patch
1436 subjects. It defaults to "auto" which enables it only if there
1437 is more than one patch. It can be enabled or disabled for all
1438 messages by setting it to "true" or "false". See --numbered
1439 option in linkgit:git-format-patch[1].
1440
1441 format.headers::
1442 Additional email headers to include in a patch to be submitted
1443 by mail. See linkgit:git-format-patch[1].
1444
1445 format.to::
1446 format.cc::
1447 Additional recipients to include in a patch to be submitted
1448 by mail. See the --to and --cc options in
1449 linkgit:git-format-patch[1].
1450
1451 format.subjectPrefix::
1452 The default for format-patch is to output files with the '[PATCH]'
1453 subject prefix. Use this variable to change that prefix.
1454
1455 format.signature::
1456 The default for format-patch is to output a signature containing
1457 the Git version number. Use this variable to change that default.
1458 Set this variable to the empty string ("") to suppress
1459 signature generation.
1460
1461 format.signatureFile::
1462 Works just like format.signature except the contents of the
1463 file specified by this variable will be used as the signature.
1464
1465 format.suffix::
1466 The default for format-patch is to output files with the suffix
1467 `.patch`. Use this variable to change that suffix (make sure to
1468 include the dot if you want it).
1469
1470 format.pretty::
1471 The default pretty format for log/show/whatchanged command,
1472 See linkgit:git-log[1], linkgit:git-show[1],
1473 linkgit:git-whatchanged[1].
1474
1475 format.thread::
1476 The default threading style for 'git format-patch'. Can be
1477 a boolean value, or `shallow` or `deep`. `shallow` threading
1478 makes every mail a reply to the head of the series,
1479 where the head is chosen from the cover letter, the
1480 `--in-reply-to`, and the first patch mail, in this order.
1481 `deep` threading makes every mail a reply to the previous one.
1482 A true boolean value is the same as `shallow`, and a false
1483 value disables threading.
1484
1485 format.signOff::
1486 A boolean value which lets you enable the `-s/--signoff` option of
1487 format-patch by default. *Note:* Adding the Signed-off-by: line to a
1488 patch should be a conscious act and means that you certify you have
1489 the rights to submit this work under the same open source license.
1490 Please see the 'SubmittingPatches' document for further discussion.
1491
1492 format.coverLetter::
1493 A boolean that controls whether to generate a cover-letter when
1494 format-patch is invoked, but in addition can be set to "auto", to
1495 generate a cover-letter only when there's more than one patch.
1496
1497 format.outputDirectory::
1498 Set a custom directory to store the resulting files instead of the
1499 current working directory.
1500
1501 format.useAutoBase::
1502 A boolean value which lets you enable the `--base=auto` option of
1503 format-patch by default.
1504
1505 filter.<driver>.clean::
1506 The command which is used to convert the content of a worktree
1507 file to a blob upon checkin. See linkgit:gitattributes[5] for
1508 details.
1509
1510 filter.<driver>.smudge::
1511 The command which is used to convert the content of a blob
1512 object to a worktree file upon checkout. See
1513 linkgit:gitattributes[5] for details.
1514
1515 fsck.<msg-id>::
1516 Allows overriding the message type (error, warn or ignore) of a
1517 specific message ID such as `missingEmail`.
1518 +
1519 For convenience, fsck prefixes the error/warning with the message ID,
1520 e.g. "missingEmail: invalid author/committer line - missing email" means
1521 that setting `fsck.missingEmail = ignore` will hide that issue.
1522 +
1523 This feature is intended to support working with legacy repositories
1524 which cannot be repaired without disruptive changes.
1525
1526 fsck.skipList::
1527 The path to a sorted list of object names (i.e. one SHA-1 per
1528 line) that are known to be broken in a non-fatal way and should
1529 be ignored. This feature is useful when an established project
1530 should be accepted despite early commits containing errors that
1531 can be safely ignored such as invalid committer email addresses.
1532 Note: corrupt objects cannot be skipped with this setting.
1533
1534 gc.aggressiveDepth::
1535 The depth parameter used in the delta compression
1536 algorithm used by 'git gc --aggressive'. This defaults
1537 to 50.
1538
1539 gc.aggressiveWindow::
1540 The window size parameter used in the delta compression
1541 algorithm used by 'git gc --aggressive'. This defaults
1542 to 250.
1543
1544 gc.auto::
1545 When there are approximately more than this many loose
1546 objects in the repository, `git gc --auto` will pack them.
1547 Some Porcelain commands use this command to perform a
1548 light-weight garbage collection from time to time. The
1549 default value is 6700. Setting this to 0 disables it.
1550
1551 gc.autoPackLimit::
1552 When there are more than this many packs that are not
1553 marked with `*.keep` file in the repository, `git gc
1554 --auto` consolidates them into one larger pack. The
1555 default value is 50. Setting this to 0 disables it.
1556
1557 gc.autoDetach::
1558 Make `git gc --auto` return immediately and run in background
1559 if the system supports it. Default is true.
1560
1561 gc.logExpiry::
1562 If the file gc.log exists, then `git gc --auto` won't run
1563 unless that file is more than 'gc.logExpiry' old. Default is
1564 "1.day". See `gc.pruneExpire` for more ways to specify its
1565 value.
1566
1567 gc.packRefs::
1568 Running `git pack-refs` in a repository renders it
1569 unclonable by Git versions prior to 1.5.1.2 over dumb
1570 transports such as HTTP. This variable determines whether
1571 'git gc' runs `git pack-refs`. This can be set to `notbare`
1572 to enable it within all non-bare repos or it can be set to a
1573 boolean value. The default is `true`.
1574
1575 gc.pruneExpire::
1576 When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
1577 Override the grace period with this config variable. The value
1578 "now" may be used to disable this grace period and always prune
1579 unreachable objects immediately, or "never" may be used to
1580 suppress pruning. This feature helps prevent corruption when
1581 'git gc' runs concurrently with another process writing to the
1582 repository; see the "NOTES" section of linkgit:git-gc[1].
1583
1584 gc.worktreePruneExpire::
1585 When 'git gc' is run, it calls
1586 'git worktree prune --expire 3.months.ago'.
1587 This config variable can be used to set a different grace
1588 period. The value "now" may be used to disable the grace
1589 period and prune `$GIT_DIR/worktrees` immediately, or "never"
1590 may be used to suppress pruning.
1591
1592 gc.reflogExpire::
1593 gc.<pattern>.reflogExpire::
1594 'git reflog expire' removes reflog entries older than
1595 this time; defaults to 90 days. The value "now" expires all
1596 entries immediately, and "never" suppresses expiration
1597 altogether. With "<pattern>" (e.g.
1598 "refs/stash") in the middle the setting applies only to
1599 the refs that match the <pattern>.
1600
1601 gc.reflogExpireUnreachable::
1602 gc.<pattern>.reflogExpireUnreachable::
1603 'git reflog expire' removes reflog entries older than
1604 this time and are not reachable from the current tip;
1605 defaults to 30 days. The value "now" expires all entries
1606 immediately, and "never" suppresses expiration altogether.
1607 With "<pattern>" (e.g. "refs/stash")
1608 in the middle, the setting applies only to the refs that
1609 match the <pattern>.
1610
1611 gc.rerereResolved::
1612 Records of conflicted merge you resolved earlier are
1613 kept for this many days when 'git rerere gc' is run.
1614 You can also use more human-readable "1.month.ago", etc.
1615 The default is 60 days. See linkgit:git-rerere[1].
1616
1617 gc.rerereUnresolved::
1618 Records of conflicted merge you have not resolved are
1619 kept for this many days when 'git rerere gc' is run.
1620 You can also use more human-readable "1.month.ago", etc.
1621 The default is 15 days. See linkgit:git-rerere[1].
1622
1623 gitcvs.commitMsgAnnotation::
1624 Append this string to each commit message. Set to empty string
1625 to disable this feature. Defaults to "via git-CVS emulator".
1626
1627 gitcvs.enabled::
1628 Whether the CVS server interface is enabled for this repository.
1629 See linkgit:git-cvsserver[1].
1630
1631 gitcvs.logFile::
1632 Path to a log file where the CVS server interface well... logs
1633 various stuff. See linkgit:git-cvsserver[1].
1634
1635 gitcvs.usecrlfattr::
1636 If true, the server will look up the end-of-line conversion
1637 attributes for files to determine the `-k` modes to use. If
1638 the attributes force Git to treat a file as text,
1639 the `-k` mode will be left blank so CVS clients will
1640 treat it as text. If they suppress text conversion, the file
1641 will be set with '-kb' mode, which suppresses any newline munging
1642 the client might otherwise do. If the attributes do not allow
1643 the file type to be determined, then `gitcvs.allBinary` is
1644 used. See linkgit:gitattributes[5].
1645
1646 gitcvs.allBinary::
1647 This is used if `gitcvs.usecrlfattr` does not resolve
1648 the correct '-kb' mode to use. If true, all
1649 unresolved files are sent to the client in
1650 mode '-kb'. This causes the client to treat them
1651 as binary files, which suppresses any newline munging it
1652 otherwise might do. Alternatively, if it is set to "guess",
1653 then the contents of the file are examined to decide if
1654 it is binary, similar to `core.autocrlf`.
1655
1656 gitcvs.dbName::
1657 Database used by git-cvsserver to cache revision information
1658 derived from the Git repository. The exact meaning depends on the
1659 used database driver, for SQLite (which is the default driver) this
1660 is a filename. Supports variable substitution (see
1661 linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
1662 Default: '%Ggitcvs.%m.sqlite'
1663
1664 gitcvs.dbDriver::
1665 Used Perl DBI driver. You can specify any available driver
1666 for this here, but it might not work. git-cvsserver is tested
1667 with 'DBD::SQLite', reported to work with 'DBD::Pg', and
1668 reported *not* to work with 'DBD::mysql'. Experimental feature.
1669 May not contain double colons (`:`). Default: 'SQLite'.
1670 See linkgit:git-cvsserver[1].
1671
1672 gitcvs.dbUser, gitcvs.dbPass::
1673 Database user and password. Only useful if setting `gitcvs.dbDriver`,
1674 since SQLite has no concept of database users and/or passwords.
1675 'gitcvs.dbUser' supports variable substitution (see
1676 linkgit:git-cvsserver[1] for details).
1677
1678 gitcvs.dbTableNamePrefix::
1679 Database table name prefix. Prepended to the names of any
1680 database tables used, allowing a single database to be used
1681 for several repositories. Supports variable substitution (see
1682 linkgit:git-cvsserver[1] for details). Any non-alphabetic
1683 characters will be replaced with underscores.
1684
1685 All gitcvs variables except for `gitcvs.usecrlfattr` and
1686 `gitcvs.allBinary` can also be specified as
1687 'gitcvs.<access_method>.<varname>' (where 'access_method'
1688 is one of "ext" and "pserver") to make them apply only for the given
1689 access method.
1690
1691 gitweb.category::
1692 gitweb.description::
1693 gitweb.owner::
1694 gitweb.url::
1695 See linkgit:gitweb[1] for description.
1696
1697 gitweb.avatar::
1698 gitweb.blame::
1699 gitweb.grep::
1700 gitweb.highlight::
1701 gitweb.patches::
1702 gitweb.pickaxe::
1703 gitweb.remote_heads::
1704 gitweb.showSizes::
1705 gitweb.snapshot::
1706 See linkgit:gitweb.conf[5] for description.
1707
1708 grep.lineNumber::
1709 If set to true, enable `-n` option by default.
1710
1711 grep.patternType::
1712 Set the default matching behavior. Using a value of 'basic', 'extended',
1713 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`,
1714 `--fixed-strings`, or `--perl-regexp` option accordingly, while the
1715 value 'default' will return to the default matching behavior.
1716
1717 grep.extendedRegexp::
1718 If set to true, enable `--extended-regexp` option by default. This
1719 option is ignored when the `grep.patternType` option is set to a value
1720 other than 'default'.
1721
1722 grep.threads::
1723 Number of grep worker threads to use.
1724 See `grep.threads` in linkgit:git-grep[1] for more information.
1725
1726 grep.fallbackToNoIndex::
1727 If set to true, fall back to git grep --no-index if git grep
1728 is executed outside of a git repository. Defaults to false.
1729
1730 gpg.program::
1731 Use this custom program instead of "`gpg`" found on `$PATH` when
1732 making or verifying a PGP signature. The program must support the
1733 same command-line interface as GPG, namely, to verify a detached
1734 signature, "`gpg --verify $file - <$signature`" is run, and the
1735 program is expected to signal a good signature by exiting with
1736 code 0, and to generate an ASCII-armored detached signature, the
1737 standard input of "`gpg -bsau $key`" is fed with the contents to be
1738 signed, and the program is expected to send the result to its
1739 standard output.
1740
1741 gui.commitMsgWidth::
1742 Defines how wide the commit message window is in the
1743 linkgit:git-gui[1]. "75" is the default.
1744
1745 gui.diffContext::
1746 Specifies how many context lines should be used in calls to diff
1747 made by the linkgit:git-gui[1]. The default is "5".
1748
1749 gui.displayUntracked::
1750 Determines if linkgit:git-gui[1] shows untracked files
1751 in the file list. The default is "true".
1752
1753 gui.encoding::
1754 Specifies the default encoding to use for displaying of
1755 file contents in linkgit:git-gui[1] and linkgit:gitk[1].
1756 It can be overridden by setting the 'encoding' attribute
1757 for relevant files (see linkgit:gitattributes[5]).
1758 If this option is not set, the tools default to the
1759 locale encoding.
1760
1761 gui.matchTrackingBranch::
1762 Determines if new branches created with linkgit:git-gui[1] should
1763 default to tracking remote branches with matching names or
1764 not. Default: "false".
1765
1766 gui.newBranchTemplate::
1767 Is used as suggested name when creating new branches using the
1768 linkgit:git-gui[1].
1769
1770 gui.pruneDuringFetch::
1771 "true" if linkgit:git-gui[1] should prune remote-tracking branches when
1772 performing a fetch. The default value is "false".
1773
1774 gui.trustmtime::
1775 Determines if linkgit:git-gui[1] should trust the file modification
1776 timestamp or not. By default the timestamps are not trusted.
1777
1778 gui.spellingDictionary::
1779 Specifies the dictionary used for spell checking commit messages in
1780 the linkgit:git-gui[1]. When set to "none" spell checking is turned
1781 off.
1782
1783 gui.fastCopyBlame::
1784 If true, 'git gui blame' uses `-C` instead of `-C -C` for original
1785 location detection. It makes blame significantly faster on huge
1786 repositories at the expense of less thorough copy detection.
1787
1788 gui.copyBlameThreshold::
1789 Specifies the threshold to use in 'git gui blame' original location
1790 detection, measured in alphanumeric characters. See the
1791 linkgit:git-blame[1] manual for more information on copy detection.
1792
1793 gui.blamehistoryctx::
1794 Specifies the radius of history context in days to show in
1795 linkgit:gitk[1] for the selected commit, when the `Show History
1796 Context` menu item is invoked from 'git gui blame'. If this
1797 variable is set to zero, the whole history is shown.
1798
1799 guitool.<name>.cmd::
1800 Specifies the shell command line to execute when the corresponding item
1801 of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
1802 mandatory for every tool. The command is executed from the root of
1803 the working directory, and in the environment it receives the name of
1804 the tool as `GIT_GUITOOL`, the name of the currently selected file as
1805 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
1806 the head is detached, 'CUR_BRANCH' is empty).
1807
1808 guitool.<name>.needsFile::
1809 Run the tool only if a diff is selected in the GUI. It guarantees
1810 that 'FILENAME' is not empty.
1811
1812 guitool.<name>.noConsole::
1813 Run the command silently, without creating a window to display its
1814 output.
1815
1816 guitool.<name>.noRescan::
1817 Don't rescan the working directory for changes after the tool
1818 finishes execution.
1819
1820 guitool.<name>.confirm::
1821 Show a confirmation dialog before actually running the tool.
1822
1823 guitool.<name>.argPrompt::
1824 Request a string argument from the user, and pass it to the tool
1825 through the `ARGS` environment variable. Since requesting an
1826 argument implies confirmation, the 'confirm' option has no effect
1827 if this is enabled. If the option is set to 'true', 'yes', or '1',
1828 the dialog uses a built-in generic prompt; otherwise the exact
1829 value of the variable is used.
1830
1831 guitool.<name>.revPrompt::
1832 Request a single valid revision from the user, and set the
1833 `REVISION` environment variable. In other aspects this option
1834 is similar to 'argPrompt', and can be used together with it.
1835
1836 guitool.<name>.revUnmerged::
1837 Show only unmerged branches in the 'revPrompt' subdialog.
1838 This is useful for tools similar to merge or rebase, but not
1839 for things like checkout or reset.
1840
1841 guitool.<name>.title::
1842 Specifies the title to use for the prompt dialog. The default
1843 is the tool name.
1844
1845 guitool.<name>.prompt::
1846 Specifies the general prompt string to display at the top of
1847 the dialog, before subsections for 'argPrompt' and 'revPrompt'.
1848 The default value includes the actual command.
1849
1850 help.browser::
1851 Specify the browser that will be used to display help in the
1852 'web' format. See linkgit:git-help[1].
1853
1854 help.format::
1855 Override the default help format used by linkgit:git-help[1].
1856 Values 'man', 'info', 'web' and 'html' are supported. 'man' is
1857 the default. 'web' and 'html' are the same.
1858
1859 help.autoCorrect::
1860 Automatically correct and execute mistyped commands after
1861 waiting for the given number of deciseconds (0.1 sec). If more
1862 than one command can be deduced from the entered text, nothing
1863 will be executed. If the value of this option is negative,
1864 the corrected command will be executed immediately. If the
1865 value is 0 - the command will be just shown but not executed.
1866 This is the default.
1867
1868 help.htmlPath::
1869 Specify the path where the HTML documentation resides. File system paths
1870 and URLs are supported. HTML pages will be prefixed with this path when
1871 help is displayed in the 'web' format. This defaults to the documentation
1872 path of your Git installation.
1873
1874 http.proxy::
1875 Override the HTTP proxy, normally configured using the 'http_proxy',
1876 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In
1877 addition to the syntax understood by curl, it is possible to specify a
1878 proxy string with a user name but no password, in which case git will
1879 attempt to acquire one in the same way it does for other credentials. See
1880 linkgit:gitcredentials[7] for more information. The syntax thus is
1881 '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden
1882 on a per-remote basis; see remote.<name>.proxy
1883
1884 http.proxyAuthMethod::
1885 Set the method with which to authenticate against the HTTP proxy. This
1886 only takes effect if the configured proxy string contains a user name part
1887 (i.e. is of the form 'user@host' or 'user@host:port'). This can be
1888 overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`.
1889 Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment
1890 variable. Possible values are:
1891 +
1892 --
1893 * `anyauth` - Automatically pick a suitable authentication method. It is
1894 assumed that the proxy answers an unauthenticated request with a 407
1895 status code and one or more Proxy-authenticate headers with supported
1896 authentication methods. This is the default.
1897 * `basic` - HTTP Basic authentication
1898 * `digest` - HTTP Digest authentication; this prevents the password from being
1899 transmitted to the proxy in clear text
1900 * `negotiate` - GSS-Negotiate authentication (compare the --negotiate option
1901 of `curl(1)`)
1902 * `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`)
1903 --
1904
1905 http.emptyAuth::
1906 Attempt authentication without seeking a username or password. This
1907 can be used to attempt GSS-Negotiate authentication without specifying
1908 a username in the URL, as libcurl normally requires a username for
1909 authentication.
1910
1911 http.delegation::
1912 Control GSSAPI credential delegation. The delegation is disabled
1913 by default in libcurl since version 7.21.7. Set parameter to tell
1914 the server what it is allowed to delegate when it comes to user
1915 credentials. Used with GSS/kerberos. Possible values are:
1916 +
1917 --
1918 * `none` - Don't allow any delegation.
1919 * `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
1920 Kerberos service ticket, which is a matter of realm policy.
1921 * `always` - Unconditionally allow the server to delegate.
1922 --
1923
1924
1925 http.extraHeader::
1926 Pass an additional HTTP header when communicating with a server. If
1927 more than one such entry exists, all of them are added as extra
1928 headers. To allow overriding the settings inherited from the system
1929 config, an empty value will reset the extra headers to the empty list.
1930
1931 http.cookieFile::
1932 The pathname of a file containing previously stored cookie lines,
1933 which should be used
1934 in the Git http session, if they match the server. The file format
1935 of the file to read cookies from should be plain HTTP headers or
1936 the Netscape/Mozilla cookie file format (see `curl(1)`).
1937 NOTE that the file specified with http.cookieFile is used only as
1938 input unless http.saveCookies is set.
1939
1940 http.saveCookies::
1941 If set, store cookies received during requests to the file specified by
1942 http.cookieFile. Has no effect if http.cookieFile is unset.
1943
1944 http.sslVersion::
1945 The SSL version to use when negotiating an SSL connection, if you
1946 want to force the default. The available and default version
1947 depend on whether libcurl was built against NSS or OpenSSL and the
1948 particular configuration of the crypto library in use. Internally
1949 this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
1950 documentation for more details on the format of this option and
1951 for the ssl version supported. Actually the possible values of
1952 this option are:
1953
1954 - sslv2
1955 - sslv3
1956 - tlsv1
1957 - tlsv1.0
1958 - tlsv1.1
1959 - tlsv1.2
1960 - tlsv1.3
1961
1962 +
1963 Can be overridden by the `GIT_SSL_VERSION` environment variable.
1964 To force git to use libcurl's default ssl version and ignore any
1965 explicit http.sslversion option, set `GIT_SSL_VERSION` to the
1966 empty string.
1967
1968 http.sslCipherList::
1969 A list of SSL ciphers to use when negotiating an SSL connection.
1970 The available ciphers depend on whether libcurl was built against
1971 NSS or OpenSSL and the particular configuration of the crypto
1972 library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
1973 option; see the libcurl documentation for more details on the format
1974 of this list.
1975 +
1976 Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable.
1977 To force git to use libcurl's default cipher list and ignore any
1978 explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the
1979 empty string.
1980
1981 http.sslVerify::
1982 Whether to verify the SSL certificate when fetching or pushing
1983 over HTTPS. Defaults to true. Can be overridden by the
1984 `GIT_SSL_NO_VERIFY` environment variable.
1985
1986 http.sslCert::
1987 File containing the SSL certificate when fetching or pushing
1988 over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment
1989 variable.
1990
1991 http.sslKey::
1992 File containing the SSL private key when fetching or pushing
1993 over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment
1994 variable.
1995
1996 http.sslCertPasswordProtected::
1997 Enable Git's password prompt for the SSL certificate. Otherwise
1998 OpenSSL will prompt the user, possibly many times, if the
1999 certificate or private key is encrypted. Can be overridden by the
2000 `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable.
2001
2002 http.sslCAInfo::
2003 File containing the certificates to verify the peer with when
2004 fetching or pushing over HTTPS. Can be overridden by the
2005 `GIT_SSL_CAINFO` environment variable.
2006
2007 http.sslCAPath::
2008 Path containing files with the CA certificates to verify the peer
2009 with when fetching or pushing over HTTPS. Can be overridden
2010 by the `GIT_SSL_CAPATH` environment variable.
2011
2012 http.pinnedpubkey::
2013 Public key of the https service. It may either be the filename of
2014 a PEM or DER encoded public key file or a string starting with
2015 'sha256//' followed by the base64 encoded sha256 hash of the
2016 public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will
2017 exit with an error if this option is set but not supported by
2018 cURL.
2019
2020 http.sslTry::
2021 Attempt to use AUTH SSL/TLS and encrypted data transfers
2022 when connecting via regular FTP protocol. This might be needed
2023 if the FTP server requires it for security reasons or you wish
2024 to connect securely whenever remote FTP server supports it.
2025 Default is false since it might trigger certificate verification
2026 errors on misconfigured servers.
2027
2028 http.maxRequests::
2029 How many HTTP requests to launch in parallel. Can be overridden
2030 by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5.
2031
2032 http.minSessions::
2033 The number of curl sessions (counted across slots) to be kept across
2034 requests. They will not be ended with curl_easy_cleanup() until
2035 http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
2036 value will be capped at 1. Defaults to 1.
2037
2038 http.postBuffer::
2039 Maximum size in bytes of the buffer used by smart HTTP
2040 transports when POSTing data to the remote system.
2041 For requests larger than this buffer size, HTTP/1.1 and
2042 Transfer-Encoding: chunked is used to avoid creating a
2043 massive pack file locally. Default is 1 MiB, which is
2044 sufficient for most requests.
2045
2046 http.lowSpeedLimit, http.lowSpeedTime::
2047 If the HTTP transfer speed is less than 'http.lowSpeedLimit'
2048 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
2049 Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and
2050 `GIT_HTTP_LOW_SPEED_TIME` environment variables.
2051
2052 http.noEPSV::
2053 A boolean which disables using of EPSV ftp command by curl.
2054 This can helpful with some "poor" ftp servers which don't
2055 support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV`
2056 environment variable. Default is false (curl will use EPSV).
2057
2058 http.userAgent::
2059 The HTTP USER_AGENT string presented to an HTTP server. The default
2060 value represents the version of the client Git such as git/1.7.1.
2061 This option allows you to override this value to a more common value
2062 such as Mozilla/4.0. This may be necessary, for instance, if
2063 connecting through a firewall that restricts HTTP connections to a set
2064 of common USER_AGENT strings (but not including those like git/1.7.1).
2065 Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.
2066
2067 http.followRedirects::
2068 Whether git should follow HTTP redirects. If set to `true`, git
2069 will transparently follow any redirect issued by a server it
2070 encounters. If set to `false`, git will treat all redirects as
2071 errors. If set to `initial`, git will follow redirects only for
2072 the initial request to a remote, but not for subsequent
2073 follow-up HTTP requests. Since git uses the redirected URL as
2074 the base for the follow-up requests, this is generally
2075 sufficient. The default is `initial`.
2076
2077 http.<url>.*::
2078 Any of the http.* options above can be applied selectively to some URLs.
2079 For a config key to match a URL, each element of the config key is
2080 compared to that of the URL, in the following order:
2081 +
2082 --
2083 . Scheme (e.g., `https` in `https://example.com/`). This field
2084 must match exactly between the config key and the URL.
2085
2086 . Host/domain name (e.g., `example.com` in `https://example.com/`).
2087 This field must match between the config key and the URL. It is
2088 possible to specify a `*` as part of the host name to match all subdomains
2089 at this level. `https://*.example.com/` for example would match
2090 `https://foo.example.com/`, but not `https://foo.bar.example.com/`.
2091
2092 . Port number (e.g., `8080` in `http://example.com:8080/`).
2093 This field must match exactly between the config key and the URL.
2094 Omitted port numbers are automatically converted to the correct
2095 default for the scheme before matching.
2096
2097 . Path (e.g., `repo.git` in `https://example.com/repo.git`). The
2098 path field of the config key must match the path field of the URL
2099 either exactly or as a prefix of slash-delimited path elements. This means
2100 a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
2101 match on a slash (`/`) boundary. Longer matches take precedence (so a config
2102 key with path `foo/bar` is a better match to URL path `foo/bar` than a config
2103 key with just path `foo/`).
2104
2105 . User name (e.g., `user` in `https://user@example.com/repo.git`). If
2106 the config key has a user name it must match the user name in the
2107 URL exactly. If the config key does not have a user name, that
2108 config key will match a URL with any user name (including none),
2109 but at a lower precedence than a config key with a user name.
2110 --
2111 +
2112 The list above is ordered by decreasing precedence; a URL that matches
2113 a config key's path is preferred to one that matches its user name. For example,
2114 if the URL is `https://user@example.com/foo/bar` a config key match of
2115 `https://example.com/foo` will be preferred over a config key match of
2116 `https://user@example.com`.
2117 +
2118 All URLs are normalized before attempting any matching (the password part,
2119 if embedded in the URL, is always ignored for matching purposes) so that
2120 equivalent URLs that are simply spelled differently will match properly.
2121 Environment variable settings always override any matches. The URLs that are
2122 matched against are those given directly to Git commands. This means any URLs
2123 visited as a result of a redirection do not participate in matching.
2124
2125 ssh.variant::
2126 By default, Git determines the command line arguments to use
2127 based on the basename of the configured SSH command (configured
2128 using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or
2129 the config setting `core.sshCommand`). If the basename is
2130 unrecognized, Git will attempt to detect support of OpenSSH
2131 options by first invoking the configured SSH command with the
2132 `-G` (print configuration) option and will subsequently use
2133 OpenSSH options (if that is successful) or no options besides
2134 the host and remote command (if it fails).
2135 +
2136 The config variable `ssh.variant` can be set to override this detection.
2137 Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`,
2138 `tortoiseplink`, `simple` (no options except the host and remote command).
2139 The default auto-detection can be explicitly requested using the value
2140 `auto`. Any other value is treated as `ssh`. This setting can also be
2141 overridden via the environment variable `GIT_SSH_VARIANT`.
2142 +
2143 The current command-line parameters used for each variant are as
2144 follows:
2145 +
2146 --
2147
2148 * `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command
2149
2150 * `simple` - [username@]host command
2151
2152 * `plink` or `putty` - [-P port] [-4] [-6] [username@]host command
2153
2154 * `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command
2155
2156 --
2157 +
2158 Except for the `simple` variant, command-line parameters are likely to
2159 change as git gains new features.
2160
2161 i18n.commitEncoding::
2162 Character encoding the commit messages are stored in; Git itself
2163 does not care per se, but this information is necessary e.g. when
2164 importing commits from emails or in the gitk graphical history
2165 browser (and possibly at other places in the future or in other
2166 porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
2167
2168 i18n.logOutputEncoding::
2169 Character encoding the commit messages are converted to when
2170 running 'git log' and friends.
2171
2172 imap::
2173 The configuration variables in the 'imap' section are described
2174 in linkgit:git-imap-send[1].
2175
2176 index.version::
2177 Specify the version with which new index files should be
2178 initialized. This does not affect existing repositories.
2179
2180 init.templateDir::
2181 Specify the directory from which templates will be copied.
2182 (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
2183
2184 instaweb.browser::
2185 Specify the program that will be used to browse your working
2186 repository in gitweb. See linkgit:git-instaweb[1].
2187
2188 instaweb.httpd::
2189 The HTTP daemon command-line to start gitweb on your working
2190 repository. See linkgit:git-instaweb[1].
2191
2192 instaweb.local::
2193 If true the web server started by linkgit:git-instaweb[1] will
2194 be bound to the local IP (127.0.0.1).
2195
2196 instaweb.modulePath::
2197 The default module path for linkgit:git-instaweb[1] to use
2198 instead of /usr/lib/apache2/modules. Only used if httpd
2199 is Apache.
2200
2201 instaweb.port::
2202 The port number to bind the gitweb httpd to. See
2203 linkgit:git-instaweb[1].
2204
2205 interactive.singleKey::
2206 In interactive commands, allow the user to provide one-letter
2207 input with a single key (i.e., without hitting enter).
2208 Currently this is used by the `--patch` mode of
2209 linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
2210 linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
2211 setting is silently ignored if portable keystroke input
2212 is not available; requires the Perl module Term::ReadKey.
2213
2214 interactive.diffFilter::
2215 When an interactive command (such as `git add --patch`) shows
2216 a colorized diff, git will pipe the diff through the shell
2217 command defined by this configuration variable. The command may
2218 mark up the diff further for human consumption, provided that it
2219 retains a one-to-one correspondence with the lines in the
2220 original diff. Defaults to disabled (no filtering).
2221
2222 log.abbrevCommit::
2223 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2224 linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
2225 override this option with `--no-abbrev-commit`.
2226
2227 log.date::
2228 Set the default date-time mode for the 'log' command.
2229 Setting a value for log.date is similar to using 'git log''s
2230 `--date` option. See linkgit:git-log[1] for details.
2231
2232 log.decorate::
2233 Print out the ref names of any commits that are shown by the log
2234 command. If 'short' is specified, the ref name prefixes 'refs/heads/',
2235 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
2236 specified, the full ref name (including prefix) will be printed.
2237 If 'auto' is specified, then if the output is going to a terminal,
2238 the ref names are shown as if 'short' were given, otherwise no ref
2239 names are shown. This is the same as the `--decorate` option
2240 of the `git log`.
2241
2242 log.follow::
2243 If `true`, `git log` will act as if the `--follow` option was used when
2244 a single <path> is given. This has the same limitations as `--follow`,
2245 i.e. it cannot be used to follow multiple files and does not work well
2246 on non-linear history.
2247
2248 log.graphColors::
2249 A list of colors, separated by commas, that can be used to draw
2250 history lines in `git log --graph`.
2251
2252 log.showRoot::
2253 If true, the initial commit will be shown as a big creation event.
2254 This is equivalent to a diff against an empty tree.
2255 Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
2256 normally hide the root commit will now show it. True by default.
2257
2258 log.showSignature::
2259 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2260 linkgit:git-whatchanged[1] assume `--show-signature`.
2261
2262 log.mailmap::
2263 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2264 linkgit:git-whatchanged[1] assume `--use-mailmap`.
2265
2266 mailinfo.scissors::
2267 If true, makes linkgit:git-mailinfo[1] (and therefore
2268 linkgit:git-am[1]) act by default as if the --scissors option
2269 was provided on the command-line. When active, this features
2270 removes everything from the message body before a scissors
2271 line (i.e. consisting mainly of ">8", "8<" and "-").
2272
2273 mailmap.file::
2274 The location of an augmenting mailmap file. The default
2275 mailmap, located in the root of the repository, is loaded
2276 first, then the mailmap file pointed to by this variable.
2277 The location of the mailmap file may be in a repository
2278 subdirectory, or somewhere outside of the repository itself.
2279 See linkgit:git-shortlog[1] and linkgit:git-blame[1].
2280
2281 mailmap.blob::
2282 Like `mailmap.file`, but consider the value as a reference to a
2283 blob in the repository. If both `mailmap.file` and
2284 `mailmap.blob` are given, both are parsed, with entries from
2285 `mailmap.file` taking precedence. In a bare repository, this
2286 defaults to `HEAD:.mailmap`. In a non-bare repository, it
2287 defaults to empty.
2288
2289 man.viewer::
2290 Specify the programs that may be used to display help in the
2291 'man' format. See linkgit:git-help[1].
2292
2293 man.<tool>.cmd::
2294 Specify the command to invoke the specified man viewer. The
2295 specified command is evaluated in shell with the man page
2296 passed as argument. (See linkgit:git-help[1].)
2297
2298 man.<tool>.path::
2299 Override the path for the given tool that may be used to
2300 display help in the 'man' format. See linkgit:git-help[1].
2301
2302 include::merge-config.txt[]
2303
2304 mergetool.<tool>.path::
2305 Override the path for the given tool. This is useful in case
2306 your tool is not in the PATH.
2307
2308 mergetool.<tool>.cmd::
2309 Specify the command to invoke the specified merge tool. The
2310 specified command is evaluated in shell with the following
2311 variables available: 'BASE' is the name of a temporary file
2312 containing the common base of the files to be merged, if available;
2313 'LOCAL' is the name of a temporary file containing the contents of
2314 the file on the current branch; 'REMOTE' is the name of a temporary
2315 file containing the contents of the file from the branch being
2316 merged; 'MERGED' contains the name of the file to which the merge
2317 tool should write the results of a successful merge.
2318
2319 mergetool.<tool>.trustExitCode::
2320 For a custom merge command, specify whether the exit code of
2321 the merge command can be used to determine whether the merge was
2322 successful. If this is not set to true then the merge target file
2323 timestamp is checked and the merge assumed to have been successful
2324 if the file has been updated, otherwise the user is prompted to
2325 indicate the success of the merge.
2326
2327 mergetool.meld.hasOutput::
2328 Older versions of `meld` do not support the `--output` option.
2329 Git will attempt to detect whether `meld` supports `--output`
2330 by inspecting the output of `meld --help`. Configuring
2331 `mergetool.meld.hasOutput` will make Git skip these checks and
2332 use the configured value instead. Setting `mergetool.meld.hasOutput`
2333 to `true` tells Git to unconditionally use the `--output` option,
2334 and `false` avoids using `--output`.
2335
2336 mergetool.keepBackup::
2337 After performing a merge, the original file with conflict markers
2338 can be saved as a file with a `.orig` extension. If this variable
2339 is set to `false` then this file is not preserved. Defaults to
2340 `true` (i.e. keep the backup files).
2341
2342 mergetool.keepTemporaries::
2343 When invoking a custom merge tool, Git uses a set of temporary
2344 files to pass to the tool. If the tool returns an error and this
2345 variable is set to `true`, then these temporary files will be
2346 preserved, otherwise they will be removed after the tool has
2347 exited. Defaults to `false`.
2348
2349 mergetool.writeToTemp::
2350 Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of
2351 conflicting files in the worktree by default. Git will attempt
2352 to use a temporary directory for these files when set `true`.
2353 Defaults to `false`.
2354
2355 mergetool.prompt::
2356 Prompt before each invocation of the merge resolution program.
2357
2358 notes.mergeStrategy::
2359 Which merge strategy to choose by default when resolving notes
2360 conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or
2361 `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES"
2362 section of linkgit:git-notes[1] for more information on each strategy.
2363
2364 notes.<name>.mergeStrategy::
2365 Which merge strategy to choose when doing a notes merge into
2366 refs/notes/<name>. This overrides the more general
2367 "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in
2368 linkgit:git-notes[1] for more information on the available strategies.
2369
2370 notes.displayRef::
2371 The (fully qualified) refname from which to show notes when
2372 showing commit messages. The value of this variable can be set
2373 to a glob, in which case notes from all matching refs will be
2374 shown. You may also specify this configuration variable
2375 several times. A warning will be issued for refs that do not
2376 exist, but a glob that does not match any refs is silently
2377 ignored.
2378 +
2379 This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
2380 environment variable, which must be a colon separated list of refs or
2381 globs.
2382 +
2383 The effective value of "core.notesRef" (possibly overridden by
2384 GIT_NOTES_REF) is also implicitly added to the list of refs to be
2385 displayed.
2386
2387 notes.rewrite.<command>::
2388 When rewriting commits with <command> (currently `amend` or
2389 `rebase`) and this variable is set to `true`, Git
2390 automatically copies your notes from the original to the
2391 rewritten commit. Defaults to `true`, but see
2392 "notes.rewriteRef" below.
2393
2394 notes.rewriteMode::
2395 When copying notes during a rewrite (see the
2396 "notes.rewrite.<command>" option), determines what to do if
2397 the target commit already has a note. Must be one of
2398 `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`.
2399 Defaults to `concatenate`.
2400 +
2401 This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
2402 environment variable.
2403
2404 notes.rewriteRef::
2405 When copying notes during a rewrite, specifies the (fully
2406 qualified) ref whose notes should be copied. The ref may be a
2407 glob, in which case notes in all matching refs will be copied.
2408 You may also specify this configuration several times.
2409 +
2410 Does not have a default value; you must configure this variable to
2411 enable note rewriting. Set it to `refs/notes/commits` to enable
2412 rewriting for the default commit notes.
2413 +
2414 This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
2415 environment variable, which must be a colon separated list of refs or
2416 globs.
2417
2418 pack.window::
2419 The size of the window used by linkgit:git-pack-objects[1] when no
2420 window size is given on the command line. Defaults to 10.
2421
2422 pack.depth::
2423 The maximum delta depth used by linkgit:git-pack-objects[1] when no
2424 maximum depth is given on the command line. Defaults to 50.
2425
2426 pack.windowMemory::
2427 The maximum size of memory that is consumed by each thread
2428 in linkgit:git-pack-objects[1] for pack window memory when
2429 no limit is given on the command line. The value can be
2430 suffixed with "k", "m", or "g". When left unconfigured (or
2431 set explicitly to 0), there will be no limit.
2432
2433 pack.compression::
2434 An integer -1..9, indicating the compression level for objects
2435 in a pack file. -1 is the zlib default. 0 means no
2436 compression, and 1..9 are various speed/size tradeoffs, 9 being
2437 slowest. If not set, defaults to core.compression. If that is
2438 not set, defaults to -1, the zlib default, which is "a default
2439 compromise between speed and compression (currently equivalent
2440 to level 6)."
2441 +
2442 Note that changing the compression level will not automatically recompress
2443 all existing objects. You can force recompression by passing the -F option
2444 to linkgit:git-repack[1].
2445
2446 pack.deltaCacheSize::
2447 The maximum memory in bytes used for caching deltas in
2448 linkgit:git-pack-objects[1] before writing them out to a pack.
2449 This cache is used to speed up the writing object phase by not
2450 having to recompute the final delta result once the best match
2451 for all objects is found. Repacking large repositories on machines
2452 which are tight with memory might be badly impacted by this though,
2453 especially if this cache pushes the system into swapping.
2454 A value of 0 means no limit. The smallest size of 1 byte may be
2455 used to virtually disable this cache. Defaults to 256 MiB.
2456
2457 pack.deltaCacheLimit::
2458 The maximum size of a delta, that is cached in
2459 linkgit:git-pack-objects[1]. This cache is used to speed up the
2460 writing object phase by not having to recompute the final delta
2461 result once the best match for all objects is found. Defaults to 1000.
2462
2463 pack.threads::
2464 Specifies the number of threads to spawn when searching for best
2465 delta matches. This requires that linkgit:git-pack-objects[1]
2466 be compiled with pthreads otherwise this option is ignored with a
2467 warning. This is meant to reduce packing time on multiprocessor
2468 machines. The required amount of memory for the delta search window
2469 is however multiplied by the number of threads.
2470 Specifying 0 will cause Git to auto-detect the number of CPU's
2471 and set the number of threads accordingly.
2472
2473 pack.indexVersion::
2474 Specify the default pack index version. Valid values are 1 for
2475 legacy pack index used by Git versions prior to 1.5.2, and 2 for
2476 the new pack index with capabilities for packs larger than 4 GB
2477 as well as proper protection against the repacking of corrupted
2478 packs. Version 2 is the default. Note that version 2 is enforced
2479 and this config option ignored whenever the corresponding pack is
2480 larger than 2 GB.
2481 +
2482 If you have an old Git that does not understand the version 2 `*.idx` file,
2483 cloning or fetching over a non native protocol (e.g. "http")
2484 that will copy both `*.pack` file and corresponding `*.idx` file from the
2485 other side may give you a repository that cannot be accessed with your
2486 older version of Git. If the `*.pack` file is smaller than 2 GB, however,
2487 you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
2488 the `*.idx` file.
2489
2490 pack.packSizeLimit::
2491 The maximum size of a pack. This setting only affects
2492 packing to a file when repacking, i.e. the git:// protocol
2493 is unaffected. It can be overridden by the `--max-pack-size`
2494 option of linkgit:git-repack[1]. Reaching this limit results
2495 in the creation of multiple packfiles; which in turn prevents
2496 bitmaps from being created.
2497 The minimum size allowed is limited to 1 MiB.
2498 The default is unlimited.
2499 Common unit suffixes of 'k', 'm', or 'g' are
2500 supported.
2501
2502 pack.useBitmaps::
2503 When true, git will use pack bitmaps (if available) when packing
2504 to stdout (e.g., during the server side of a fetch). Defaults to
2505 true. You should not generally need to turn this off unless
2506 you are debugging pack bitmaps.
2507
2508 pack.writeBitmaps (deprecated)::
2509 This is a deprecated synonym for `repack.writeBitmaps`.
2510
2511 pack.writeBitmapHashCache::
2512 When true, git will include a "hash cache" section in the bitmap
2513 index (if one is written). This cache can be used to feed git's
2514 delta heuristics, potentially leading to better deltas between
2515 bitmapped and non-bitmapped objects (e.g., when serving a fetch
2516 between an older, bitmapped pack and objects that have been
2517 pushed since the last gc). The downside is that it consumes 4
2518 bytes per object of disk space, and that JGit's bitmap
2519 implementation does not understand it, causing it to complain if
2520 Git and JGit are used on the same repository. Defaults to false.
2521
2522 pager.<cmd>::
2523 If the value is boolean, turns on or off pagination of the
2524 output of a particular Git subcommand when writing to a tty.
2525 Otherwise, turns on pagination for the subcommand using the
2526 pager specified by the value of `pager.<cmd>`. If `--paginate`
2527 or `--no-pager` is specified on the command line, it takes
2528 precedence over this option. To disable pagination for all
2529 commands, set `core.pager` or `GIT_PAGER` to `cat`.
2530
2531 pretty.<name>::
2532 Alias for a --pretty= format string, as specified in
2533 linkgit:git-log[1]. Any aliases defined here can be used just
2534 as the built-in pretty formats could. For example,
2535 running `git config pretty.changelog "format:* %H %s"`
2536 would cause the invocation `git log --pretty=changelog`
2537 to be equivalent to running `git log "--pretty=format:* %H %s"`.
2538 Note that an alias with the same name as a built-in format
2539 will be silently ignored.
2540
2541 protocol.allow::
2542 If set, provide a user defined default policy for all protocols which
2543 don't explicitly have a policy (`protocol.<name>.allow`). By default,
2544 if unset, known-safe protocols (http, https, git, ssh, file) have a
2545 default policy of `always`, known-dangerous protocols (ext) have a
2546 default policy of `never`, and all other protocols have a default
2547 policy of `user`. Supported policies:
2548 +
2549 --
2550
2551 * `always` - protocol is always able to be used.
2552
2553 * `never` - protocol is never able to be used.
2554
2555 * `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
2556 either unset or has a value of 1. This policy should be used when you want a
2557 protocol to be directly usable by the user but don't want it used by commands which
2558 execute clone/fetch/push commands without user input, e.g. recursive
2559 submodule initialization.
2560
2561 --
2562
2563 protocol.<name>.allow::
2564 Set a policy to be used by protocol `<name>` with clone/fetch/push
2565 commands. See `protocol.allow` above for the available policies.
2566 +
2567 The protocol names currently used by git are:
2568 +
2569 --
2570 - `file`: any local file-based path (including `file://` URLs,
2571 or local paths)
2572
2573 - `git`: the anonymous git protocol over a direct TCP
2574 connection (or proxy, if configured)
2575
2576 - `ssh`: git over ssh (including `host:path` syntax,
2577 `ssh://`, etc).
2578
2579 - `http`: git over http, both "smart http" and "dumb http".
2580 Note that this does _not_ include `https`; if you want to configure
2581 both, you must do so individually.
2582
2583 - any external helpers are named by their protocol (e.g., use
2584 `hg` to allow the `git-remote-hg` helper)
2585 --
2586
2587 protocol.version::
2588 Experimental. If set, clients will attempt to communicate with a
2589 server using the specified protocol version. If unset, no
2590 attempt will be made by the client to communicate using a
2591 particular protocol version, this results in protocol version 0
2592 being used.
2593 Supported versions:
2594 +
2595 --
2596
2597 * `0` - the original wire protocol.
2598
2599 * `1` - the original wire protocol with the addition of a version string
2600 in the initial response from the server.
2601
2602 --
2603
2604 pull.ff::
2605 By default, Git does not create an extra merge commit when merging
2606 a commit that is a descendant of the current commit. Instead, the
2607 tip of the current branch is fast-forwarded. When set to `false`,
2608 this variable tells Git to create an extra merge commit in such
2609 a case (equivalent to giving the `--no-ff` option from the command
2610 line). When set to `only`, only such fast-forward merges are
2611 allowed (equivalent to giving the `--ff-only` option from the
2612 command line). This setting overrides `merge.ff` when pulling.
2613
2614 pull.rebase::
2615 When true, rebase branches on top of the fetched branch, instead
2616 of merging the default branch from the default remote when "git
2617 pull" is run. See "branch.<name>.rebase" for setting this on a
2618 per-branch basis.
2619 +
2620 When preserve, also pass `--preserve-merges` along to 'git rebase'
2621 so that locally committed merge commits will not be flattened
2622 by running 'git pull'.
2623 +
2624 When the value is `interactive`, the rebase is run in interactive mode.
2625 +
2626 *NOTE*: this is a possibly dangerous operation; do *not* use
2627 it unless you understand the implications (see linkgit:git-rebase[1]
2628 for details).
2629
2630 pull.octopus::
2631 The default merge strategy to use when pulling multiple branches
2632 at once.
2633
2634 pull.twohead::
2635 The default merge strategy to use when pulling a single branch.
2636
2637 push.default::
2638 Defines the action `git push` should take if no refspec is
2639 explicitly given. Different values are well-suited for
2640 specific workflows; for instance, in a purely central workflow
2641 (i.e. the fetch source is equal to the push destination),
2642 `upstream` is probably what you want. Possible values are:
2643 +
2644 --
2645
2646 * `nothing` - do not push anything (error out) unless a refspec is
2647 explicitly given. This is primarily meant for people who want to
2648 avoid mistakes by always being explicit.
2649
2650 * `current` - push the current branch to update a branch with the same
2651 name on the receiving end. Works in both central and non-central
2652 workflows.
2653
2654 * `upstream` - push the current branch back to the branch whose
2655 changes are usually integrated into the current branch (which is
2656 called `@{upstream}`). This mode only makes sense if you are
2657 pushing to the same repository you would normally pull from
2658 (i.e. central workflow).
2659
2660 * `tracking` - This is a deprecated synonym for `upstream`.
2661
2662 * `simple` - in centralized workflow, work like `upstream` with an
2663 added safety to refuse to push if the upstream branch's name is
2664 different from the local one.
2665 +
2666 When pushing to a remote that is different from the remote you normally
2667 pull from, work as `current`. This is the safest option and is suited
2668 for beginners.
2669 +
2670 This mode has become the default in Git 2.0.
2671
2672 * `matching` - push all branches having the same name on both ends.
2673 This makes the repository you are pushing to remember the set of
2674 branches that will be pushed out (e.g. if you always push 'maint'
2675 and 'master' there and no other branches, the repository you push
2676 to will have these two branches, and your local 'maint' and
2677 'master' will be pushed there).
2678 +
2679 To use this mode effectively, you have to make sure _all_ the
2680 branches you would push out are ready to be pushed out before
2681 running 'git push', as the whole point of this mode is to allow you
2682 to push all of the branches in one go. If you usually finish work
2683 on only one branch and push out the result, while other branches are
2684 unfinished, this mode is not for you. Also this mode is not
2685 suitable for pushing into a shared central repository, as other
2686 people may add new branches there, or update the tip of existing
2687 branches outside your control.
2688 +
2689 This used to be the default, but not since Git 2.0 (`simple` is the
2690 new default).
2691
2692 --
2693
2694 push.followTags::
2695 If set to true enable `--follow-tags` option by default. You
2696 may override this configuration at time of push by specifying
2697 `--no-follow-tags`.
2698
2699 push.gpgSign::
2700 May be set to a boolean value, or the string 'if-asked'. A true
2701 value causes all pushes to be GPG signed, as if `--signed` is
2702 passed to linkgit:git-push[1]. The string 'if-asked' causes
2703 pushes to be signed if the server supports it, as if
2704 `--signed=if-asked` is passed to 'git push'. A false value may
2705 override a value from a lower-priority config file. An explicit
2706 command-line flag always overrides this config option.
2707
2708 push.pushOption::
2709 When no `--push-option=<option>` argument is given from the
2710 command line, `git push` behaves as if each <value> of
2711 this variable is given as `--push-option=<value>`.
2712 +
2713 This is a multi-valued variable, and an empty value can be used in a
2714 higher priority configuration file (e.g. `.git/config` in a
2715 repository) to clear the values inherited from a lower priority
2716 configuration files (e.g. `$HOME/.gitconfig`).
2717 +
2718 --
2719
2720 Example:
2721
2722 /etc/gitconfig
2723 push.pushoption = a
2724 push.pushoption = b
2725
2726 ~/.gitconfig
2727 push.pushoption = c
2728
2729 repo/.git/config
2730 push.pushoption =
2731 push.pushoption = b
2732
2733 This will result in only b (a and c are cleared).
2734
2735 --
2736
2737 push.recurseSubmodules::
2738 Make sure all submodule commits used by the revisions to be pushed
2739 are available on a remote-tracking branch. If the value is 'check'
2740 then Git will verify that all submodule commits that changed in the
2741 revisions to be pushed are available on at least one remote of the
2742 submodule. If any commits are missing, the push will be aborted and
2743 exit with non-zero status. If the value is 'on-demand' then all
2744 submodules that changed in the revisions to be pushed will be
2745 pushed. If on-demand was not able to push all necessary revisions
2746 it will also be aborted and exit with non-zero status. If the value
2747 is 'no' then default behavior of ignoring submodules when pushing
2748 is retained. You may override this configuration at time of push by
2749 specifying '--recurse-submodules=check|on-demand|no'.
2750
2751 include::rebase-config.txt[]
2752
2753 receive.advertiseAtomic::
2754 By default, git-receive-pack will advertise the atomic push
2755 capability to its clients. If you don't want to advertise this
2756 capability, set this variable to false.
2757
2758 receive.advertisePushOptions::
2759 When set to true, git-receive-pack will advertise the push options
2760 capability to its clients. False by default.
2761
2762 receive.autogc::
2763 By default, git-receive-pack will run "git-gc --auto" after
2764 receiving data from git-push and updating refs. You can stop
2765 it by setting this variable to false.
2766
2767 receive.certNonceSeed::
2768 By setting this variable to a string, `git receive-pack`
2769 will accept a `git push --signed` and verifies it by using
2770 a "nonce" protected by HMAC using this string as a secret
2771 key.
2772
2773 receive.certNonceSlop::
2774 When a `git push --signed` sent a push certificate with a
2775 "nonce" that was issued by a receive-pack serving the same
2776 repository within this many seconds, export the "nonce"
2777 found in the certificate to `GIT_PUSH_CERT_NONCE` to the
2778 hooks (instead of what the receive-pack asked the sending
2779 side to include). This may allow writing checks in
2780 `pre-receive` and `post-receive` a bit easier. Instead of
2781 checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
2782 that records by how many seconds the nonce is stale to
2783 decide if they want to accept the certificate, they only
2784 can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
2785
2786 receive.fsckObjects::
2787 If it is set to true, git-receive-pack will check all received
2788 objects. It will abort in the case of a malformed object or a
2789 broken link. The result of an abort are only dangling objects.
2790 Defaults to false. If not set, the value of `transfer.fsckObjects`
2791 is used instead.
2792
2793 receive.fsck.<msg-id>::
2794 When `receive.fsckObjects` is set to true, errors can be switched
2795 to warnings and vice versa by configuring the `receive.fsck.<msg-id>`
2796 setting where the `<msg-id>` is the fsck message ID and the value
2797 is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes
2798 the error/warning with the message ID, e.g. "missingEmail: invalid
2799 author/committer line - missing email" means that setting
2800 `receive.fsck.missingEmail = ignore` will hide that issue.
2801 +
2802 This feature is intended to support working with legacy repositories
2803 which would not pass pushing when `receive.fsckObjects = true`, allowing
2804 the host to accept repositories with certain known issues but still catch
2805 other issues.
2806
2807 receive.fsck.skipList::
2808 The path to a sorted list of object names (i.e. one SHA-1 per
2809 line) that are known to be broken in a non-fatal way and should
2810 be ignored. This feature is useful when an established project
2811 should be accepted despite early commits containing errors that
2812 can be safely ignored such as invalid committer email addresses.
2813 Note: corrupt objects cannot be skipped with this setting.
2814
2815 receive.keepAlive::
2816 After receiving the pack from the client, `receive-pack` may
2817 produce no output (if `--quiet` was specified) while processing
2818 the pack, causing some networks to drop the TCP connection.
2819 With this option set, if `receive-pack` does not transmit
2820 any data in this phase for `receive.keepAlive` seconds, it will
2821 send a short keepalive packet. The default is 5 seconds; set
2822 to 0 to disable keepalives entirely.
2823
2824 receive.unpackLimit::
2825 If the number of objects received in a push is below this
2826 limit then the objects will be unpacked into loose object
2827 files. However if the number of received objects equals or
2828 exceeds this limit then the received pack will be stored as
2829 a pack, after adding any missing delta bases. Storing the
2830 pack from a push can make the push operation complete faster,
2831 especially on slow filesystems. If not set, the value of
2832 `transfer.unpackLimit` is used instead.
2833
2834 receive.maxInputSize::
2835 If the size of the incoming pack stream is larger than this
2836 limit, then git-receive-pack will error out, instead of
2837 accepting the pack file. If not set or set to 0, then the size
2838 is unlimited.
2839
2840 receive.denyDeletes::
2841 If set to true, git-receive-pack will deny a ref update that deletes
2842 the ref. Use this to prevent such a ref deletion via a push.
2843
2844 receive.denyDeleteCurrent::
2845 If set to true, git-receive-pack will deny a ref update that
2846 deletes the currently checked out branch of a non-bare repository.
2847
2848 receive.denyCurrentBranch::
2849 If set to true or "refuse", git-receive-pack will deny a ref update
2850 to the currently checked out branch of a non-bare repository.
2851 Such a push is potentially dangerous because it brings the HEAD
2852 out of sync with the index and working tree. If set to "warn",
2853 print a warning of such a push to stderr, but allow the push to
2854 proceed. If set to false or "ignore", allow such pushes with no
2855 message. Defaults to "refuse".
2856 +
2857 Another option is "updateInstead" which will update the working
2858 tree if pushing into the current branch. This option is
2859 intended for synchronizing working directories when one side is not easily
2860 accessible via interactive ssh (e.g. a live web site, hence the requirement
2861 that the working directory be clean). This mode also comes in handy when
2862 developing inside a VM to test and fix code on different Operating Systems.
2863 +
2864 By default, "updateInstead" will refuse the push if the working tree or
2865 the index have any difference from the HEAD, but the `push-to-checkout`
2866 hook can be used to customize this. See linkgit:githooks[5].
2867
2868 receive.denyNonFastForwards::
2869 If set to true, git-receive-pack will deny a ref update which is
2870 not a fast-forward. Use this to prevent such an update via a push,
2871 even if that push is forced. This configuration variable is
2872 set when initializing a shared repository.
2873
2874 receive.hideRefs::
2875 This variable is the same as `transfer.hideRefs`, but applies
2876 only to `receive-pack` (and so affects pushes, but not fetches).
2877 An attempt to update or delete a hidden ref by `git push` is
2878 rejected.
2879
2880 receive.updateServerInfo::
2881 If set to true, git-receive-pack will run git-update-server-info
2882 after receiving data from git-push and updating refs.
2883
2884 receive.shallowUpdate::
2885 If set to true, .git/shallow can be updated when new refs
2886 require new shallow roots. Otherwise those refs are rejected.
2887
2888 remote.pushDefault::
2889 The remote to push to by default. Overrides
2890 `branch.<name>.remote` for all branches, and is overridden by
2891 `branch.<name>.pushRemote` for specific branches.
2892
2893 remote.<name>.url::
2894 The URL of a remote repository. See linkgit:git-fetch[1] or
2895 linkgit:git-push[1].
2896
2897 remote.<name>.pushurl::
2898 The push URL of a remote repository. See linkgit:git-push[1].
2899
2900 remote.<name>.proxy::
2901 For remotes that require curl (http, https and ftp), the URL to
2902 the proxy to use for that remote. Set to the empty string to
2903 disable proxying for that remote.
2904
2905 remote.<name>.proxyAuthMethod::
2906 For remotes that require curl (http, https and ftp), the method to use for
2907 authenticating against the proxy in use (probably set in
2908 `remote.<name>.proxy`). See `http.proxyAuthMethod`.
2909
2910 remote.<name>.fetch::
2911 The default set of "refspec" for linkgit:git-fetch[1]. See
2912 linkgit:git-fetch[1].
2913
2914 remote.<name>.push::
2915 The default set of "refspec" for linkgit:git-push[1]. See
2916 linkgit:git-push[1].
2917
2918 remote.<name>.mirror::
2919 If true, pushing to this remote will automatically behave
2920 as if the `--mirror` option was given on the command line.
2921
2922 remote.<name>.skipDefaultUpdate::
2923 If true, this remote will be skipped by default when updating
2924 using linkgit:git-fetch[1] or the `update` subcommand of
2925 linkgit:git-remote[1].
2926
2927 remote.<name>.skipFetchAll::
2928 If true, this remote will be skipped by default when updating
2929 using linkgit:git-fetch[1] or the `update` subcommand of
2930 linkgit:git-remote[1].
2931
2932 remote.<name>.receivepack::
2933 The default program to execute on the remote side when pushing. See
2934 option --receive-pack of linkgit:git-push[1].
2935
2936 remote.<name>.uploadpack::
2937 The default program to execute on the remote side when fetching. See
2938 option --upload-pack of linkgit:git-fetch-pack[1].
2939
2940 remote.<name>.tagOpt::
2941 Setting this value to --no-tags disables automatic tag following when
2942 fetching from remote <name>. Setting it to --tags will fetch every
2943 tag from remote <name>, even if they are not reachable from remote
2944 branch heads. Passing these flags directly to linkgit:git-fetch[1] can
2945 override this setting. See options --tags and --no-tags of
2946 linkgit:git-fetch[1].
2947
2948 remote.<name>.vcs::
2949 Setting this to a value <vcs> will cause Git to interact with
2950 the remote with the git-remote-<vcs> helper.
2951
2952 remote.<name>.prune::
2953 When set to true, fetching from this remote by default will also
2954 remove any remote-tracking references that no longer exist on the
2955 remote (as if the `--prune` option was given on the command line).
2956 Overrides `fetch.prune` settings, if any.
2957
2958 remote.<name>.pruneTags::
2959 When set to true, fetching from this remote by default will also
2960 remove any local tags that no longer exist on the remote if pruning
2961 is activated in general via `remote.<name>.prune`, `fetch.prune` or
2962 `--prune`. Overrides `fetch.pruneTags` settings, if any.
2963 +
2964 See also `remote.<name>.prune` and the PRUNING section of
2965 linkgit:git-fetch[1].
2966
2967 remotes.<group>::
2968 The list of remotes which are fetched by "git remote update
2969 <group>". See linkgit:git-remote[1].
2970
2971 repack.useDeltaBaseOffset::
2972 By default, linkgit:git-repack[1] creates packs that use
2973 delta-base offset. If you need to share your repository with
2974 Git older than version 1.4.4, either directly or via a dumb
2975 protocol such as http, then you need to set this option to
2976 "false" and repack. Access from old Git versions over the
2977 native protocol are unaffected by this option.
2978
2979 repack.packKeptObjects::
2980 If set to true, makes `git repack` act as if
2981 `--pack-kept-objects` was passed. See linkgit:git-repack[1] for
2982 details. Defaults to `false` normally, but `true` if a bitmap
2983 index is being written (either via `--write-bitmap-index` or
2984 `repack.writeBitmaps`).
2985
2986 repack.writeBitmaps::
2987 When true, git will write a bitmap index when packing all
2988 objects to disk (e.g., when `git repack -a` is run). This
2989 index can speed up the "counting objects" phase of subsequent
2990 packs created for clones and fetches, at the cost of some disk
2991 space and extra time spent on the initial repack. This has
2992 no effect if multiple packfiles are created.
2993 Defaults to false.
2994
2995 rerere.autoUpdate::
2996 When set to true, `git-rerere` updates the index with the
2997 resulting contents after it cleanly resolves conflicts using
2998 previously recorded resolution. Defaults to false.
2999
3000 rerere.enabled::
3001 Activate recording of resolved conflicts, so that identical
3002 conflict hunks can be resolved automatically, should they be
3003 encountered again. By default, linkgit:git-rerere[1] is
3004 enabled if there is an `rr-cache` directory under the
3005 `$GIT_DIR`, e.g. if "rerere" was previously used in the
3006 repository.
3007
3008 sendemail.identity::
3009 A configuration identity. When given, causes values in the
3010 'sendemail.<identity>' subsection to take precedence over
3011 values in the 'sendemail' section. The default identity is
3012 the value of `sendemail.identity`.
3013
3014 sendemail.smtpEncryption::
3015 See linkgit:git-send-email[1] for description. Note that this
3016 setting is not subject to the 'identity' mechanism.
3017
3018 sendemail.smtpssl (deprecated)::
3019 Deprecated alias for 'sendemail.smtpEncryption = ssl'.
3020
3021 sendemail.smtpsslcertpath::
3022 Path to ca-certificates (either a directory or a single file).
3023 Set it to an empty string to disable certificate verification.
3024
3025 sendemail.<identity>.*::
3026 Identity-specific versions of the 'sendemail.*' parameters
3027 found below, taking precedence over those when this
3028 identity is selected, through either the command-line or
3029 `sendemail.identity`.
3030
3031 sendemail.aliasesFile::
3032 sendemail.aliasFileType::
3033 sendemail.annotate::
3034 sendemail.bcc::
3035 sendemail.cc::
3036 sendemail.ccCmd::
3037 sendemail.chainReplyTo::
3038 sendemail.confirm::
3039 sendemail.envelopeSender::
3040 sendemail.from::
3041 sendemail.multiEdit::
3042 sendemail.signedoffbycc::
3043 sendemail.smtpPass::
3044 sendemail.suppresscc::
3045 sendemail.suppressFrom::
3046 sendemail.to::
3047 sendemail.tocmd::
3048 sendemail.smtpDomain::
3049 sendemail.smtpServer::
3050 sendemail.smtpServerPort::
3051 sendemail.smtpServerOption::
3052 sendemail.smtpUser::
3053 sendemail.thread::
3054 sendemail.transferEncoding::
3055 sendemail.validate::
3056 sendemail.xmailer::
3057 See linkgit:git-send-email[1] for description.
3058
3059 sendemail.signedoffcc (deprecated)::
3060 Deprecated alias for `sendemail.signedoffbycc`.
3061
3062 sendemail.smtpBatchSize::
3063 Number of messages to be sent per connection, after that a relogin
3064 will happen. If the value is 0 or undefined, send all messages in
3065 one connection.
3066 See also the `--batch-size` option of linkgit:git-send-email[1].
3067
3068 sendemail.smtpReloginDelay::
3069 Seconds wait before reconnecting to smtp server.
3070 See also the `--relogin-delay` option of linkgit:git-send-email[1].
3071
3072 showbranch.default::
3073 The default set of branches for linkgit:git-show-branch[1].
3074 See linkgit:git-show-branch[1].
3075
3076 splitIndex.maxPercentChange::
3077 When the split index feature is used, this specifies the
3078 percent of entries the split index can contain compared to the
3079 total number of entries in both the split index and the shared
3080 index before a new shared index is written.
3081 The value should be between 0 and 100. If the value is 0 then
3082 a new shared index is always written, if it is 100 a new
3083 shared index is never written.
3084 By default the value is 20, so a new shared index is written
3085 if the number of entries in the split index would be greater
3086 than 20 percent of the total number of entries.
3087 See linkgit:git-update-index[1].
3088
3089 splitIndex.sharedIndexExpire::
3090 When the split index feature is used, shared index files that
3091 were not modified since the time this variable specifies will
3092 be removed when a new shared index file is created. The value
3093 "now" expires all entries immediately, and "never" suppresses
3094 expiration altogether.
3095 The default value is "2.weeks.ago".
3096 Note that a shared index file is considered modified (for the
3097 purpose of expiration) each time a new split-index file is
3098 either created based on it or read from it.
3099 See linkgit:git-update-index[1].
3100
3101 status.relativePaths::
3102 By default, linkgit:git-status[1] shows paths relative to the
3103 current directory. Setting this variable to `false` shows paths
3104 relative to the repository root (this was the default for Git
3105 prior to v1.5.4).
3106
3107 status.short::
3108 Set to true to enable --short by default in linkgit:git-status[1].
3109 The option --no-short takes precedence over this variable.
3110
3111 status.branch::
3112 Set to true to enable --branch by default in linkgit:git-status[1].
3113 The option --no-branch takes precedence over this variable.
3114
3115 status.displayCommentPrefix::
3116 If set to true, linkgit:git-status[1] will insert a comment
3117 prefix before each output line (starting with
3118 `core.commentChar`, i.e. `#` by default). This was the
3119 behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
3120 Defaults to false.
3121
3122 status.showStash::
3123 If set to true, linkgit:git-status[1] will display the number of
3124 entries currently stashed away.
3125 Defaults to false.
3126
3127 status.showUntrackedFiles::
3128 By default, linkgit:git-status[1] and linkgit:git-commit[1] show
3129 files which are not currently tracked by Git. Directories which
3130 contain only untracked files, are shown with the directory name
3131 only. Showing untracked files means that Git needs to lstat() all
3132 the files in the whole repository, which might be slow on some
3133 systems. So, this variable controls how the commands displays
3134 the untracked files. Possible values are:
3135 +
3136 --
3137 * `no` - Show no untracked files.
3138 * `normal` - Show untracked files and directories.
3139 * `all` - Show also individual files in untracked directories.
3140 --
3141 +
3142 If this variable is not specified, it defaults to 'normal'.
3143 This variable can be overridden with the -u|--untracked-files option
3144 of linkgit:git-status[1] and linkgit:git-commit[1].
3145
3146 status.submoduleSummary::
3147 Defaults to false.
3148 If this is set to a non zero number or true (identical to -1 or an
3149 unlimited number), the submodule summary will be enabled and a
3150 summary of commits for modified submodules will be shown (see
3151 --summary-limit option of linkgit:git-submodule[1]). Please note
3152 that the summary output command will be suppressed for all
3153 submodules when `diff.ignoreSubmodules` is set to 'all' or only
3154 for those submodules where `submodule.<name>.ignore=all`. The only
3155 exception to that rule is that status and commit will show staged
3156 submodule changes. To
3157 also view the summary for ignored submodules you can either use
3158 the --ignore-submodules=dirty command-line option or the 'git
3159 submodule summary' command, which shows a similar output but does
3160 not honor these settings.
3161
3162 stash.showPatch::
3163 If this is set to true, the `git stash show` command without an
3164 option will show the stash entry in patch form. Defaults to false.
3165 See description of 'show' command in linkgit:git-stash[1].
3166
3167 stash.showStat::
3168 If this is set to true, the `git stash show` command without an
3169 option will show diffstat of the stash entry. Defaults to true.
3170 See description of 'show' command in linkgit:git-stash[1].
3171
3172 submodule.<name>.url::
3173 The URL for a submodule. This variable is copied from the .gitmodules
3174 file to the git config via 'git submodule init'. The user can change
3175 the configured URL before obtaining the submodule via 'git submodule
3176 update'. If neither submodule.<name>.active or submodule.active are
3177 set, the presence of this variable is used as a fallback to indicate
3178 whether the submodule is of interest to git commands.
3179 See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
3180
3181 submodule.<name>.update::
3182 The method by which a submodule is updated by 'git submodule update',
3183 which is the only affected command, others such as
3184 'git checkout --recurse-submodules' are unaffected. It exists for
3185 historical reasons, when 'git submodule' was the only command to
3186 interact with submodules; settings like `submodule.active`
3187 and `pull.rebase` are more specific. It is populated by
3188 `git submodule init` from the linkgit:gitmodules[5] file.
3189 See description of 'update' command in linkgit:git-submodule[1].
3190
3191 submodule.<name>.branch::
3192 The remote branch name for a submodule, used by `git submodule
3193 update --remote`. Set this option to override the value found in
3194 the `.gitmodules` file. See linkgit:git-submodule[1] and
3195 linkgit:gitmodules[5] for details.
3196
3197 submodule.<name>.fetchRecurseSubmodules::
3198 This option can be used to control recursive fetching of this
3199 submodule. It can be overridden by using the --[no-]recurse-submodules
3200 command-line option to "git fetch" and "git pull".
3201 This setting will override that from in the linkgit:gitmodules[5]
3202 file.
3203
3204 submodule.<name>.ignore::
3205 Defines under what circumstances "git status" and the diff family show
3206 a submodule as modified. When set to "all", it will never be considered
3207 modified (but it will nonetheless show up in the output of status and
3208 commit when it has been staged), "dirty" will ignore all changes
3209 to the submodules work tree and
3210 takes only differences between the HEAD of the submodule and the commit
3211 recorded in the superproject into account. "untracked" will additionally
3212 let submodules with modified tracked files in their work tree show up.
3213 Using "none" (the default when this option is not set) also shows
3214 submodules that have untracked files in their work tree as changed.
3215 This setting overrides any setting made in .gitmodules for this submodule,
3216 both settings can be overridden on the command line by using the
3217 "--ignore-submodules" option. The 'git submodule' commands are not
3218 affected by this setting.
3219
3220 submodule.<name>.active::
3221 Boolean value indicating if the submodule is of interest to git
3222 commands. This config option takes precedence over the
3223 submodule.active config option.
3224
3225 submodule.active::
3226 A repeated field which contains a pathspec used to match against a
3227 submodule's path to determine if the submodule is of interest to git
3228 commands.
3229
3230 submodule.recurse::
3231 Specifies if commands recurse into submodules by default. This
3232 applies to all commands that have a `--recurse-submodules` option,
3233 except `clone`.
3234 Defaults to false.
3235
3236 submodule.fetchJobs::
3237 Specifies how many submodules are fetched/cloned at the same time.
3238 A positive integer allows up to that number of submodules fetched
3239 in parallel. A value of 0 will give some reasonable default.
3240 If unset, it defaults to 1.
3241
3242 submodule.alternateLocation::
3243 Specifies how the submodules obtain alternates when submodules are
3244 cloned. Possible values are `no`, `superproject`.
3245 By default `no` is assumed, which doesn't add references. When the
3246 value is set to `superproject` the submodule to be cloned computes
3247 its alternates location relative to the superprojects alternate.
3248
3249 submodule.alternateErrorStrategy::
3250 Specifies how to treat errors with the alternates for a submodule
3251 as computed via `submodule.alternateLocation`. Possible values are
3252 `ignore`, `info`, `die`. Default is `die`.
3253
3254 tag.forceSignAnnotated::
3255 A boolean to specify whether annotated tags created should be GPG signed.
3256 If `--annotate` is specified on the command line, it takes
3257 precedence over this option.
3258
3259 tag.sort::
3260 This variable controls the sort ordering of tags when displayed by
3261 linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the
3262 value of this variable will be used as the default.
3263
3264 tar.umask::
3265 This variable can be used to restrict the permission bits of
3266 tar archive entries. The default is 0002, which turns off the
3267 world write bit. The special value "user" indicates that the
3268 archiving user's umask will be used instead. See umask(2) and
3269 linkgit:git-archive[1].
3270
3271 transfer.fsckObjects::
3272 When `fetch.fsckObjects` or `receive.fsckObjects` are
3273 not set, the value of this variable is used instead.
3274 Defaults to false.
3275
3276 transfer.hideRefs::
3277 String(s) `receive-pack` and `upload-pack` use to decide which
3278 refs to omit from their initial advertisements. Use more than
3279 one definition to specify multiple prefix strings. A ref that is
3280 under the hierarchies listed in the value of this variable is
3281 excluded, and is hidden when responding to `git push` or `git
3282 fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for
3283 program-specific versions of this config.
3284 +
3285 You may also include a `!` in front of the ref name to negate the entry,
3286 explicitly exposing it, even if an earlier entry marked it as hidden.
3287 If you have multiple hideRefs values, later entries override earlier ones
3288 (and entries in more-specific config files override less-specific ones).
3289 +
3290 If a namespace is in use, the namespace prefix is stripped from each
3291 reference before it is matched against `transfer.hiderefs` patterns.
3292 For example, if `refs/heads/master` is specified in `transfer.hideRefs` and
3293 the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master`
3294 is omitted from the advertisements but `refs/heads/master` and
3295 `refs/namespaces/bar/refs/heads/master` are still advertised as so-called
3296 "have" lines. In order to match refs before stripping, add a `^` in front of
3297 the ref name. If you combine `!` and `^`, `!` must be specified first.
3298 +
3299 Even if you hide refs, a client may still be able to steal the target
3300 objects via the techniques described in the "SECURITY" section of the
3301 linkgit:gitnamespaces[7] man page; it's best to keep private data in a
3302 separate repository.
3303
3304 transfer.unpackLimit::
3305 When `fetch.unpackLimit` or `receive.unpackLimit` are
3306 not set, the value of this variable is used instead.
3307 The default value is 100.
3308
3309 uploadarchive.allowUnreachable::
3310 If true, allow clients to use `git archive --remote` to request
3311 any tree, whether reachable from the ref tips or not. See the
3312 discussion in the "SECURITY" section of
3313 linkgit:git-upload-archive[1] for more details. Defaults to
3314 `false`.
3315
3316 uploadpack.hideRefs::
3317 This variable is the same as `transfer.hideRefs`, but applies
3318 only to `upload-pack` (and so affects only fetches, not pushes).
3319 An attempt to fetch a hidden ref by `git fetch` will fail. See
3320 also `uploadpack.allowTipSHA1InWant`.
3321
3322 uploadpack.allowTipSHA1InWant::
3323 When `uploadpack.hideRefs` is in effect, allow `upload-pack`
3324 to accept a fetch request that asks for an object at the tip
3325 of a hidden ref (by default, such a request is rejected).
3326 See also `uploadpack.hideRefs`. Even if this is false, a client
3327 may be able to steal objects via the techniques described in the
3328 "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's
3329 best to keep private data in a separate repository.
3330
3331 uploadpack.allowReachableSHA1InWant::
3332 Allow `upload-pack` to accept a fetch request that asks for an
3333 object that is reachable from any ref tip. However, note that
3334 calculating object reachability is computationally expensive.
3335 Defaults to `false`. Even if this is false, a client may be able
3336 to steal objects via the techniques described in the "SECURITY"
3337 section of the linkgit:gitnamespaces[7] man page; it's best to
3338 keep private data in a separate repository.
3339
3340 uploadpack.allowAnySHA1InWant::
3341 Allow `upload-pack` to accept a fetch request that asks for any
3342 object at all.
3343 Defaults to `false`.
3344
3345 uploadpack.keepAlive::
3346 When `upload-pack` has started `pack-objects`, there may be a
3347 quiet period while `pack-objects` prepares the pack. Normally
3348 it would output progress information, but if `--quiet` was used
3349 for the fetch, `pack-objects` will output nothing at all until
3350 the pack data begins. Some clients and networks may consider
3351 the server to be hung and give up. Setting this option instructs
3352 `upload-pack` to send an empty keepalive packet every
3353 `uploadpack.keepAlive` seconds. Setting this option to 0
3354 disables keepalive packets entirely. The default is 5 seconds.
3355
3356 uploadpack.packObjectsHook::
3357 If this option is set, when `upload-pack` would run
3358 `git pack-objects` to create a packfile for a client, it will
3359 run this shell command instead. The `pack-objects` command and
3360 arguments it _would_ have run (including the `git pack-objects`
3361 at the beginning) are appended to the shell command. The stdin
3362 and stdout of the hook are treated as if `pack-objects` itself
3363 was run. I.e., `upload-pack` will feed input intended for
3364 `pack-objects` to the hook, and expects a completed packfile on
3365 stdout.
3366
3367 uploadpack.allowFilter::
3368 If this option is set, `upload-pack` will support partial
3369 clone and partial fetch object filtering.
3370 +
3371 Note that this configuration variable is ignored if it is seen in the
3372 repository-level config (this is a safety measure against fetching from
3373 untrusted repositories).
3374
3375 url.<base>.insteadOf::
3376 Any URL that starts with this value will be rewritten to
3377 start, instead, with <base>. In cases where some site serves a
3378 large number of repositories, and serves them with multiple
3379 access methods, and some users need to use different access
3380 methods, this feature allows people to specify any of the
3381 equivalent URLs and have Git automatically rewrite the URL to
3382 the best alternative for the particular user, even for a
3383 never-before-seen repository on the site. When more than one
3384 insteadOf strings match a given URL, the longest match is used.
3385 +
3386 Note that any protocol restrictions will be applied to the rewritten
3387 URL. If the rewrite changes the URL to use a custom protocol or remote
3388 helper, you may need to adjust the `protocol.*.allow` config to permit
3389 the request. In particular, protocols you expect to use for submodules
3390 must be set to `always` rather than the default of `user`. See the
3391 description of `protocol.allow` above.
3392
3393 url.<base>.pushInsteadOf::
3394 Any URL that starts with this value will not be pushed to;
3395 instead, it will be rewritten to start with <base>, and the
3396 resulting URL will be pushed to. In cases where some site serves
3397 a large number of repositories, and serves them with multiple
3398 access methods, some of which do not allow push, this feature
3399 allows people to specify a pull-only URL and have Git
3400 automatically use an appropriate URL to push, even for a
3401 never-before-seen repository on the site. When more than one
3402 pushInsteadOf strings match a given URL, the longest match is
3403 used. If a remote has an explicit pushurl, Git will ignore this
3404 setting for that remote.
3405
3406 user.email::
3407 Your email address to be recorded in any newly created commits.
3408 Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and
3409 `EMAIL` environment variables. See linkgit:git-commit-tree[1].
3410
3411 user.name::
3412 Your full name to be recorded in any newly created commits.
3413 Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME`
3414 environment variables. See linkgit:git-commit-tree[1].
3415
3416 user.useConfigOnly::
3417 Instruct Git to avoid trying to guess defaults for `user.email`
3418 and `user.name`, and instead retrieve the values only from the
3419 configuration. For example, if you have multiple email addresses
3420 and would like to use a different one for each repository, then
3421 with this configuration option set to `true` in the global config
3422 along with a name, Git will prompt you to set up an email before
3423 making new commits in a newly cloned repository.
3424 Defaults to `false`.
3425
3426 user.signingKey::
3427 If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
3428 key you want it to automatically when creating a signed tag or
3429 commit, you can override the default selection with this variable.
3430 This option is passed unchanged to gpg's --local-user parameter,
3431 so you may specify a key using any method that gpg supports.
3432
3433 versionsort.prereleaseSuffix (deprecated)::
3434 Deprecated alias for `versionsort.suffix`. Ignored if
3435 `versionsort.suffix` is set.
3436
3437 versionsort.suffix::
3438 Even when version sort is used in linkgit:git-tag[1], tagnames
3439 with the same base version but different suffixes are still sorted
3440 lexicographically, resulting e.g. in prerelease tags appearing
3441 after the main release (e.g. "1.0-rc1" after "1.0"). This
3442 variable can be specified to determine the sorting order of tags
3443 with different suffixes.
3444 +
3445 By specifying a single suffix in this variable, any tagname containing
3446 that suffix will appear before the corresponding main release. E.g. if
3447 the variable is set to "-rc", then all "1.0-rcX" tags will appear before
3448 "1.0". If specified multiple times, once per suffix, then the order of
3449 suffixes in the configuration will determine the sorting order of tagnames
3450 with those suffixes. E.g. if "-pre" appears before "-rc" in the
3451 configuration, then all "1.0-preX" tags will be listed before any
3452 "1.0-rcX" tags. The placement of the main release tag relative to tags
3453 with various suffixes can be determined by specifying the empty suffix
3454 among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
3455 "-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags
3456 are listed first, followed by "v4.8", then "v4.8-ckX" and finally
3457 "v4.8-bfsX".
3458 +
3459 If more than one suffixes match the same tagname, then that tagname will
3460 be sorted according to the suffix which starts at the earliest position in
3461 the tagname. If more than one different matching suffixes start at
3462 that earliest position, then that tagname will be sorted according to the
3463 longest of those suffixes.
3464 The sorting order between different suffixes is undefined if they are
3465 in multiple config files.
3466
3467 web.browser::
3468 Specify a web browser that may be used by some commands.
3469 Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
3470 may use it.
3471
3472 worktree.guessRemote::
3473 With `add`, if no branch argument, and neither of `-b` nor
3474 `-B` nor `--detach` are given, the command defaults to
3475 creating a new branch from HEAD. If `worktree.guessRemote` is
3476 set to true, `worktree add` tries to find a remote-tracking
3477 branch whose name uniquely matches the new branch name. If
3478 such a branch exists, it is checked out and set as "upstream"
3479 for the new branch. If no such match can be found, it falls
3480 back to creating a new branch from the current HEAD.