[git/git.git] / Documentation / config.txt
2 ------------------
4 The Git configuration file contains a number of variables that affect
5 the Git commands' behavior. The `.git/config` file in each repository
6 is used to store the configuration for that repository, and
7 `$HOME/.gitconfig` is used to store a per-user configuration as
8 fallback values for the `.git/config` file. The file `/etc/gitconfig`
9 can be used to store a system-wide default configuration.
11 The configuration variables are used by both the Git plumbing
12 and the porcelains. The variables are divided into sections, wherein
13 the fully qualified variable name of the variable itself is the last
14 dot-separated segment and the section name is everything before the last
15 dot. The variable names are case-insensitive, allow only alphanumeric
16 characters and `-`, and must start with an alphabetic character. Some
17 variables may appear multiple times; we say then that the variable is
18 multivalued.
20 Syntax
21 ~~~~~~
23 The syntax is fairly flexible and permissive; whitespaces are mostly
24 ignored. The '#' and ';' characters begin comments to the end of line,
25 blank lines are ignored.
27 The file consists of sections and variables. A section begins with
28 the name of the section in square brackets and continues until the next
29 section begins. Section names are case-insensitive. Only alphanumeric
30 characters, `-` and `.` are allowed in section names. Each variable
31 must belong to some section, which means that there must be a section
32 header before the first setting of a variable.
34 Sections can be further divided into subsections. To begin a subsection
35 put its name in double quotes, separated by space from the section name,
36 in the section header, like in the example below:
38 --------
39 [section "subsection"]
41 --------
43 Subsection names are case sensitive and can contain any characters except
44 newline and the null byte. Doublequote `"` and backslash can be included
45 by escaping them as `\"` and `\\`, respectively. Backslashes preceding
46 other characters are dropped when reading; for example, `\t` is read as
47 `t` and `\0` is read as `0` Section headers cannot span multiple lines.
48 Variables may belong directly to a section or to a given subsection. You
49 can have `[section]` if you have `[section "subsection"]`, but you don't
50 need to.
52 There is also a deprecated `[section.subsection]` syntax. With this
53 syntax, the subsection name is converted to lower-case and is also
54 compared case sensitively. These subsection names follow the same
55 restrictions as section names.
57 All the other lines (and the remainder of the line after the section
58 header) are recognized as setting variables, in the form
59 'name = value' (or just 'name', which is a short-hand to say that
60 the variable is the boolean "true").
61 The variable names are case-insensitive, allow only alphanumeric characters
62 and `-`, and must start with an alphabetic character.
64 A line that defines a value can be continued to the next line by
65 ending it with a `\`; the backquote and the end-of-line are
66 stripped. Leading whitespaces after 'name =', the remainder of the
67 line after the first comment character '#' or ';', and trailing
68 whitespaces of the line are discarded unless they are enclosed in
69 double quotes. Internal whitespaces within the value are retained
70 verbatim.
72 Inside double quotes, double quote `"` and backslash `\` characters
73 must be escaped: use `\"` for `"` and `\\` for `\`.
75 The following escape sequences (beside `\"` and `\\`) are recognized:
76 `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
77 and `\b` for backspace (BS). Other char escape sequences (including octal
78 escape sequences) are invalid.
81 Includes
82 ~~~~~~~~
84 The `include` and `includeIf` sections allow you to include config
85 directives from another source. These sections behave identically to
86 each other with the exception that `includeIf` sections may be ignored
87 if their condition does not evaluate to true; see "Conditional includes"
88 below.
90 You can include a config file from another by setting the special
91 `include.path` (or `includeIf.*.path`) variable to the name of the file
92 to be included. The variable takes a pathname as its value, and is
93 subject to tilde expansion. These variables can be given multiple times.
95 The contents of the included file are inserted immediately, as if they
96 had been found at the location of the include directive. If the value of the
97 variable is a relative path, the path is considered to
98 be relative to the configuration file in which the include directive
99 was found. See below for examples.
101 Conditional includes
102 ~~~~~~~~~~~~~~~~~~~~
104 You can include a config file from another conditionally by setting a
105 `includeIf.<condition>.path` variable to the name of the file to be
106 included.
108 The condition starts with a keyword followed by a colon and some data
109 whose format and meaning depends on the keyword. Supported keywords
110 are:
112 `gitdir`::
114 The data that follows the keyword `gitdir:` is used as a glob
115 pattern. If the location of the .git directory matches the
116 pattern, the include condition is met.
117 +
118 The .git location may be auto-discovered, or come from `$GIT_DIR`
119 environment variable. If the repository is auto discovered via a .git
120 file (e.g. from submodules, or a linked worktree), the .git location
121 would be the final location where the .git directory is, not where the
122 .git file is.
123 +
124 The pattern can contain standard globbing wildcards and two additional
125 ones, `**/` and `/**`, that can match multiple path components. Please
126 refer to linkgit:gitignore[5] for details. For convenience:
128 * If the pattern starts with `~/`, `~` will be substituted with the
129 content of the environment variable `HOME`.
131 * If the pattern starts with `./`, it is replaced with the directory
132 containing the current config file.
134 * If the pattern does not start with either `~/`, `./` or `/`, `**/`
135 will be automatically prepended. For example, the pattern `foo/bar`
136 becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
138 * If the pattern ends with `/`, `**` will be automatically added. For
139 example, the pattern `foo/` becomes `foo/**`. In other words, it
140 matches "foo" and everything inside, recursively.
142 `gitdir/i`::
143 This is the same as `gitdir` except that matching is done
144 case-insensitively (e.g. on case-insensitive file sytems)
146 A few more notes on matching via `gitdir` and `gitdir/i`:
148 * Symlinks in `$GIT_DIR` are not resolved before matching.
150 * Both the symlink & realpath versions of paths will be matched
151 outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
152 /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
153 will match.
154 +
155 This was not the case in the initial release of this feature in
156 v2.13.0, which only matched the realpath version. Configuration that
157 wants to be compatible with the initial release of this feature needs
158 to either specify only the realpath version, or both versions.
160 * Note that "../" is not special and will match literally, which is
161 unlikely what you want.
163 Example
164 ~~~~~~~
166 # Core variables
167 [core]
168 ; Don't trust file modes
169 filemode = false
171 # Our diff algorithm
172 [diff]
173 external = /usr/local/bin/diff-wrapper
174 renames = true
176 [branch "devel"]
177 remote = origin
178 merge = refs/heads/devel
180 # Proxy settings
181 [core]
182 gitProxy="ssh" for "kernel.org"
183 gitProxy=default-proxy ; for the rest
185 [include]
186 path = /path/to/foo.inc ; include by absolute path
187 path = foo.inc ; find "foo.inc" relative to the current file
188 path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
190 ; include if $GIT_DIR is /path/to/foo/.git
191 [includeIf "gitdir:/path/to/foo/.git"]
192 path = /path/to/foo.inc
194 ; include for all repositories inside /path/to/group
195 [includeIf "gitdir:/path/to/group/"]
196 path = /path/to/foo.inc
198 ; include for all repositories inside $HOME/to/group
199 [includeIf "gitdir:~/to/group/"]
200 path = /path/to/foo.inc
202 ; relative paths are always relative to the including
203 ; file (if the condition is true); their location is not
204 ; affected by the condition
205 [includeIf "gitdir:/path/to/group/"]
206 path = foo.inc
208 Values
209 ~~~~~~
211 Values of many variables are treated as a simple string, but there
212 are variables that take values of specific types and there are rules
213 as to how to spell them.
215 boolean::
217 When a variable is said to take a boolean value, many
218 synonyms are accepted for 'true' and 'false'; these are all
219 case-insensitive.
221 true;; Boolean true literals are `yes`, `on`, `true`,
222 and `1`. Also, a variable defined without `= <value>`
223 is taken as true.
225 false;; Boolean false literals are `no`, `off`, `false`,
226 `0` and the empty string.
227 +
228 When converting value to the canonical form using `--bool` type
229 specifier, 'git config' will ensure that the output is "true" or
230 "false" (spelled in lowercase).
232 integer::
233 The value for many variables that specify various sizes can
234 be suffixed with `k`, `M`,... to mean "scale the number by
235 1024", "by 1024x1024", etc.
237 color::
238 The value for a variable that takes a color is a list of
239 colors (at most two, one for foreground and one for background)
240 and attributes (as many as you want), separated by spaces.
241 +
242 The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
243 `blue`, `magenta`, `cyan` and `white`. The first color given is the
244 foreground; the second is the background.
245 +
246 Colors may also be given as numbers between 0 and 255; these use ANSI
247 256-color mode (but note that not all terminals may support this). If
248 your terminal supports it, you may also specify 24-bit RGB values as
249 hex, like `#ff0ab3`.
250 +
251 The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
252 `italic`, and `strike` (for crossed-out or "strikethrough" letters).
253 The position of any attributes with respect to the colors
254 (before, after, or in between), doesn't matter. Specific attributes may
255 be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
256 `no-ul`, etc).
257 +
258 An empty color string produces no color effect at all. This can be used
259 to avoid coloring specific elements without disabling color entirely.
260 +
261 For git's pre-defined color slots, the attributes are meant to be reset
262 at the beginning of each item in the colored output. So setting
263 `color.decorate.branch` to `black` will paint that branch name in a
264 plain `black`, even if the previous thing on the same output line (e.g.
265 opening parenthesis before the list of branch names in `log --decorate`
266 output) is set to be painted with `bold` or some other attribute.
267 However, custom log formats may do more complicated and layered
268 coloring, and the negated forms may be useful there.
270 pathname::
271 A variable that takes a pathname value can be given a
272 string that begins with "`~/`" or "`~user/`", and the usual
273 tilde expansion happens to such a string: `~/`
274 is expanded to the value of `$HOME`, and `~user/` to the
275 specified user's home directory.
278 Variables
279 ~~~~~~~~~
281 Note that this list is non-comprehensive and not necessarily complete.
282 For command-specific variables, you will find a more detailed description
283 in the appropriate manual page.
285 Other git-related tools may and do use their own variables. When
286 inventing new variables for use in your own tool, make sure their
287 names do not conflict with those that are used by Git itself and
288 other popular tools, and describe them in your documentation.
291 advice.*::
292 These variables control various optional help messages designed to
293 aid new users. All 'advice.*' variables default to 'true', and you
294 can tell Git that you do not need help by setting these to 'false':
295 +
296 --
297 pushUpdateRejected::
298 Set this variable to 'false' if you want to disable
299 'pushNonFFCurrent',
300 'pushNonFFMatching', 'pushAlreadyExists',
301 'pushFetchFirst', and 'pushNeedsForce'
302 simultaneously.
303 pushNonFFCurrent::
304 Advice shown when linkgit:git-push[1] fails due to a
305 non-fast-forward update to the current branch.
306 pushNonFFMatching::
307 Advice shown when you ran linkgit:git-push[1] and pushed
308 'matching refs' explicitly (i.e. you used ':', or
309 specified a refspec that isn't your current branch) and
310 it resulted in a non-fast-forward error.
311 pushAlreadyExists::
312 Shown when linkgit:git-push[1] rejects an update that
313 does not qualify for fast-forwarding (e.g., a tag.)
314 pushFetchFirst::
315 Shown when linkgit:git-push[1] rejects an update that
316 tries to overwrite a remote ref that points at an
317 object we do not have.
318 pushNeedsForce::
319 Shown when linkgit:git-push[1] rejects an update that
320 tries to overwrite a remote ref that points at an
321 object that is not a commit-ish, or make the remote
322 ref point at an object that is not a commit-ish.
323 statusHints::
324 Show directions on how to proceed from the current
325 state in the output of linkgit:git-status[1], in
326 the template shown when writing commit messages in
327 linkgit:git-commit[1], and in the help message shown
328 by linkgit:git-checkout[1] when switching branch.
329 statusUoption::
330 Advise to consider using the `-u` option to linkgit:git-status[1]
331 when the command takes more than 2 seconds to enumerate untracked
332 files.
333 commitBeforeMerge::
334 Advice shown when linkgit:git-merge[1] refuses to
335 merge to avoid overwriting local changes.
336 resolveConflict::
337 Advice shown by various commands when conflicts
338 prevent the operation from being performed.
339 implicitIdentity::
340 Advice on how to set your identity configuration when
341 your information is guessed from the system username and
342 domain name.
343 detachedHead::
344 Advice shown when you used linkgit:git-checkout[1] to
345 move to the detach HEAD state, to instruct how to create
346 a local branch after the fact.
347 checkoutAmbiguousRemoteBranchName::
348 Advice shown when the argument to
349 linkgit:git-checkout[1] ambiguously resolves to a
350 remote tracking branch on more than one remote in
351 situations where an unambiguous argument would have
352 otherwise caused a remote-tracking branch to be
353 checked out. See the `checkout.defaultRemote`
354 configuration variable for how to set a given remote
355 to used by default in some situations where this
356 advice would be printed.
357 amWorkDir::
358 Advice that shows the location of the patch file when
359 linkgit:git-am[1] fails to apply it.
360 rmHints::
361 In case of failure in the output of linkgit:git-rm[1],
362 show directions on how to proceed from the current state.
363 addEmbeddedRepo::
364 Advice on what to do when you've accidentally added one
365 git repo inside of another.
366 ignoredHook::
367 Advice shown if a hook is ignored because the hook is not
368 set as executable.
369 waitingForEditor::
370 Print a message to the terminal whenever Git is waiting for
371 editor input from the user.
372 --
374 core.fileMode::
375 Tells Git if the executable bit of files in the working tree
376 is to be honored.
377 +
378 Some filesystems lose the executable bit when a file that is
379 marked as executable is checked out, or checks out a
380 non-executable file with executable bit on.
381 linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
382 to see if it handles the executable bit correctly
383 and this variable is automatically set as necessary.
384 +
385 A repository, however, may be on a filesystem that handles
386 the filemode correctly, and this variable is set to 'true'
387 when created, but later may be made accessible from another
388 environment that loses the filemode (e.g. exporting ext4 via
389 CIFS mount, visiting a Cygwin created repository with
390 Git for Windows or Eclipse).
391 In such a case it may be necessary to set this variable to 'false'.
392 See linkgit:git-update-index[1].
393 +
394 The default is true (when core.filemode is not specified in the config file).
396 core.hideDotFiles::
397 (Windows-only) If true, mark newly-created directories and files whose
398 name starts with a dot as hidden. If 'dotGitOnly', only the `.git/`
399 directory is hidden, but no other files starting with a dot. The
400 default mode is 'dotGitOnly'.
402 core.ignoreCase::
403 Internal variable which enables various workarounds to enable
404 Git to work better on filesystems that are not case sensitive,
405 like APFS, HFS+, FAT, NTFS, etc. For example, if a directory listing
406 finds "makefile" when Git expects "Makefile", Git will assume
407 it is really the same file, and continue to remember it as
408 "Makefile".
409 +
410 The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
411 will probe and set core.ignoreCase true if appropriate when the repository
412 is created.
413 +
414 Git relies on the proper configuration of this variable for your operating
415 and file system. Modifying this value may result in unexpected behavior.
417 core.precomposeUnicode::
418 This option is only used by Mac OS implementation of Git.
419 When core.precomposeUnicode=true, Git reverts the unicode decomposition
420 of filenames done by Mac OS. This is useful when sharing a repository
421 between Mac OS and Linux or Windows.
422 (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
423 When false, file names are handled fully transparent by Git,
424 which is backward compatible with older versions of Git.
426 core.protectHFS::
427 If set to true, do not allow checkout of paths that would
428 be considered equivalent to `.git` on an HFS+ filesystem.
429 Defaults to `true` on Mac OS, and `false` elsewhere.
431 core.protectNTFS::
432 If set to true, do not allow checkout of paths that would
433 cause problems with the NTFS filesystem, e.g. conflict with
434 8.3 "short" names.
435 Defaults to `true` on Windows, and `false` elsewhere.
437 core.fsmonitor::
438 If set, the value of this variable is used as a command which
439 will identify all files that may have changed since the
440 requested date/time. This information is used to speed up git by
441 avoiding unnecessary processing of files that have not changed.
442 See the "fsmonitor-watchman" section of linkgit:githooks[5].
444 core.trustctime::
445 If false, the ctime differences between the index and the
446 working tree are ignored; useful when the inode change time
447 is regularly modified by something outside Git (file system
448 crawlers and some backup systems).
449 See linkgit:git-update-index[1]. True by default.
451 core.splitIndex::
452 If true, the split-index feature of the index will be used.
453 See linkgit:git-update-index[1]. False by default.
455 core.untrackedCache::
456 Determines what to do about the untracked cache feature of the
457 index. It will be kept, if this variable is unset or set to
458 `keep`. It will automatically be added if set to `true`. And
459 it will automatically be removed, if set to `false`. Before
460 setting it to `true`, you should check that mtime is working
461 properly on your system.
462 See linkgit:git-update-index[1]. `keep` by default.
464 core.checkStat::
465 When missing or is set to `default`, many fields in the stat
466 structure are checked to detect if a file has been modified
467 since Git looked at it. When this configuration variable is
468 set to `minimal`, sub-second part of mtime and ctime, the
469 uid and gid of the owner of the file, the inode number (and
470 the device number, if Git was compiled to use it), are
471 excluded from the check among these fields, leaving only the
472 whole-second part of mtime (and ctime, if `core.trustCtime`
473 is set) and the filesize to be checked.
474 +
475 There are implementations of Git that do not leave usable values in
476 some fields (e.g. JGit); by excluding these fields from the
477 comparison, the `minimal` mode may help interoperability when the
478 same repository is used by these other systems at the same time.
480 core.quotePath::
481 Commands that output paths (e.g. 'ls-files', 'diff'), will
482 quote "unusual" characters in the pathname by enclosing the
483 pathname in double-quotes and escaping those characters with
484 backslashes in the same way C escapes control characters (e.g.
485 `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with
486 values larger than 0x80 (e.g. octal `\302\265` for "micro" in
487 UTF-8). If this variable is set to false, bytes higher than
488 0x80 are not considered "unusual" any more. Double-quotes,
489 backslash and control characters are always escaped regardless
490 of the setting of this variable. A simple space character is
491 not considered "unusual". Many commands can output pathnames
492 completely verbatim using the `-z` option. The default value
493 is true.
495 core.eol::
496 Sets the line ending type to use in the working directory for
497 files that have the `text` property set when core.autocrlf is false.
498 Alternatives are 'lf', 'crlf' and 'native', which uses the platform's
499 native line ending. The default value is `native`. See
500 linkgit:gitattributes[5] for more information on end-of-line
501 conversion.
503 core.safecrlf::
504 If true, makes Git check if converting `CRLF` is reversible when
505 end-of-line conversion is active. Git will verify if a command
506 modifies a file in the work tree either directly or indirectly.
507 For example, committing a file followed by checking out the
508 same file should yield the original file in the work tree. If
509 this is not the case for the current setting of
510 `core.autocrlf`, Git will reject the file. The variable can
511 be set to "warn", in which case Git will only warn about an
512 irreversible conversion but continue the operation.
513 +
514 CRLF conversion bears a slight chance of corrupting data.
515 When it is enabled, Git will convert CRLF to LF during commit and LF to
516 CRLF during checkout. A file that contains a mixture of LF and
517 CRLF before the commit cannot be recreated by Git. For text
518 files this is the right thing to do: it corrects line endings
519 such that we have only LF line endings in the repository.
520 But for binary files that are accidentally classified as text the
521 conversion can corrupt data.
522 +
523 If you recognize such corruption early you can easily fix it by
524 setting the conversion type explicitly in .gitattributes. Right
525 after committing you still have the original file in your work
526 tree and this file is not yet corrupted. You can explicitly tell
527 Git that this file is binary and Git will handle the file
528 appropriately.
529 +
530 Unfortunately, the desired effect of cleaning up text files with
531 mixed line endings and the undesired effect of corrupting binary
532 files cannot be distinguished. In both cases CRLFs are removed
533 in an irreversible way. For text files this is the right thing
534 to do because CRLFs are line endings, while for binary files
535 converting CRLFs corrupts data.
536 +
537 Note, this safety check does not mean that a checkout will generate a
538 file identical to the original file for a different setting of
539 `core.eol` and `core.autocrlf`, but only for the current one. For
540 example, a text file with `LF` would be accepted with `core.eol=lf`
541 and could later be checked out with `core.eol=crlf`, in which case the
542 resulting file would contain `CRLF`, although the original file
543 contained `LF`. However, in both work trees the line endings would be
544 consistent, that is either all `LF` or all `CRLF`, but never mixed. A
545 file with mixed line endings would be reported by the `core.safecrlf`
546 mechanism.
548 core.autocrlf::
549 Setting this variable to "true" is the same as setting
550 the `text` attribute to "auto" on all files and core.eol to "crlf".
551 Set to true if you want to have `CRLF` line endings in your
552 working directory and the repository has LF line endings.
553 This variable can be set to 'input',
554 in which case no output conversion is performed.
556 core.checkRoundtripEncoding::
557 A comma and/or whitespace separated list of encodings that Git
558 performs UTF-8 round trip checks on if they are used in an
559 `working-tree-encoding` attribute (see linkgit:gitattributes[5]).
560 The default value is `SHIFT-JIS`.
562 core.symlinks::
563 If false, symbolic links are checked out as small plain files that
564 contain the link text. linkgit:git-update-index[1] and
565 linkgit:git-add[1] will not change the recorded type to regular
566 file. Useful on filesystems like FAT that do not support
567 symbolic links.
568 +
569 The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
570 will probe and set core.symlinks false if appropriate when the repository
571 is created.
573 core.gitProxy::
574 A "proxy command" to execute (as 'command host port') instead
575 of establishing direct connection to the remote server when
576 using the Git protocol for fetching. If the variable value is
577 in the "COMMAND for DOMAIN" format, the command is applied only
578 on hostnames ending with the specified domain string. This variable
579 may be set multiple times and is matched in the given order;
580 the first match wins.
581 +
582 Can be overridden by the `GIT_PROXY_COMMAND` environment variable
583 (which always applies universally, without the special "for"
584 handling).
585 +
586 The special string `none` can be used as the proxy command to
587 specify that no proxy be used for a given domain pattern.
588 This is useful for excluding servers inside a firewall from
589 proxy use, while defaulting to a common proxy for external domains.
591 core.sshCommand::
592 If this variable is set, `git fetch` and `git push` will
593 use the specified command instead of `ssh` when they need to
594 connect to a remote system. The command is in the same form as
595 the `GIT_SSH_COMMAND` environment variable and is overridden
596 when the environment variable is set.
598 core.ignoreStat::
599 If true, Git will avoid using lstat() calls to detect if files have
600 changed by setting the "assume-unchanged" bit for those tracked files
601 which it has updated identically in both the index and working tree.
602 +
603 When files are modified outside of Git, the user will need to stage
604 the modified files explicitly (e.g. see 'Examples' section in
605 linkgit:git-update-index[1]).
606 Git will not normally detect changes to those files.
607 +
608 This is useful on systems where lstat() calls are very slow, such as
609 CIFS/Microsoft Windows.
610 +
611 False by default.
613 core.preferSymlinkRefs::
614 Instead of the default "symref" format for HEAD
615 and other symbolic reference files, use symbolic links.
616 This is sometimes needed to work with old scripts that
617 expect HEAD to be a symbolic link.
619 core.alternateRefsCommand::
620 When advertising tips of available history from an alternate, use the shell to
621 execute the specified command instead of linkgit:git-for-each-ref[1]. The
622 first argument is the absolute path of the alternate. Output must contain one
623 hex object id per line (i.e., the same as produce by `git for-each-ref
624 --format='%(objectname)'`).
625 +
626 Note that you cannot generally put `git for-each-ref` directly into the config
627 value, as it does not take a repository path as an argument (but you can wrap
628 the command above in a shell script).
630 core.bare::
631 If true this repository is assumed to be 'bare' and has no
632 working directory associated with it. If this is the case a
633 number of commands that require a working directory will be
634 disabled, such as linkgit:git-add[1] or linkgit:git-merge[1].
635 +
636 This setting is automatically guessed by linkgit:git-clone[1] or
637 linkgit:git-init[1] when the repository was created. By default a
638 repository that ends in "/.git" is assumed to be not bare (bare =
639 false), while all other repositories are assumed to be bare (bare
640 = true).
642 core.worktree::
643 Set the path to the root of the working tree.
644 If `GIT_COMMON_DIR` environment variable is set, core.worktree
645 is ignored and not used for determining the root of working tree.
646 This can be overridden by the `GIT_WORK_TREE` environment
647 variable and the `--work-tree` command-line option.
648 The value can be an absolute path or relative to the path to
649 the .git directory, which is either specified by --git-dir
650 or GIT_DIR, or automatically discovered.
651 If --git-dir or GIT_DIR is specified but none of
652 --work-tree, GIT_WORK_TREE and core.worktree is specified,
653 the current working directory is regarded as the top level
654 of your working tree.
655 +
656 Note that this variable is honored even when set in a configuration
657 file in a ".git" subdirectory of a directory and its value differs
658 from the latter directory (e.g. "/path/to/.git/config" has
659 core.worktree set to "/different/path"), which is most likely a
660 misconfiguration. Running Git commands in the "/path/to" directory will
661 still use "/different/path" as the root of the work tree and can cause
662 confusion unless you know what you are doing (e.g. you are creating a
663 read-only snapshot of the same index to a location different from the
664 repository's usual working tree).
666 core.logAllRefUpdates::
667 Enable the reflog. Updates to a ref <ref> is logged to the file
668 "`$GIT_DIR/logs/<ref>`", by appending the new and old
669 SHA-1, the date/time and the reason of the update, but
670 only when the file exists. If this configuration
671 variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`"
672 file is automatically created for branch heads (i.e. under
673 `refs/heads/`), remote refs (i.e. under `refs/remotes/`),
674 note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`.
675 If it is set to `always`, then a missing reflog is automatically
676 created for any ref under `refs/`.
677 +
678 This information can be used to determine what commit
679 was the tip of a branch "2 days ago".
680 +
681 This value is true by default in a repository that has
682 a working directory associated with it, and false by
683 default in a bare repository.
685 core.repositoryFormatVersion::
686 Internal variable identifying the repository format and layout
687 version.
689 core.sharedRepository::
690 When 'group' (or 'true'), the repository is made shareable between
691 several users in a group (making sure all the files and objects are
692 group-writable). When 'all' (or 'world' or 'everybody'), the
693 repository will be readable by all users, additionally to being
694 group-shareable. When 'umask' (or 'false'), Git will use permissions
695 reported by umask(2). When '0xxx', where '0xxx' is an octal number,
696 files in the repository will have this mode value. '0xxx' will override
697 user's umask value (whereas the other options will only override
698 requested parts of the user's umask value). Examples: '0660' will make
699 the repo read/write-able for the owner and group, but inaccessible to
700 others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
701 repository that is group-readable but not group-writable.
702 See linkgit:git-init[1]. False by default.
704 core.warnAmbiguousRefs::
705 If true, Git will warn you if the ref name you passed it is ambiguous
706 and might match multiple refs in the repository. True by default.
708 core.compression::
709 An integer -1..9, indicating a default compression level.
710 -1 is the zlib default. 0 means no compression,
711 and 1..9 are various speed/size tradeoffs, 9 being slowest.
712 If set, this provides a default to other compression variables,
713 such as `core.looseCompression` and `pack.compression`.
715 core.looseCompression::
716 An integer -1..9, indicating the compression level for objects that
717 are not in a pack file. -1 is the zlib default. 0 means no
718 compression, and 1..9 are various speed/size tradeoffs, 9 being
719 slowest. If not set, defaults to core.compression. If that is
720 not set, defaults to 1 (best speed).
722 core.packedGitWindowSize::
723 Number of bytes of a pack file to map into memory in a
724 single mapping operation. Larger window sizes may allow
725 your system to process a smaller number of large pack files
726 more quickly. Smaller window sizes will negatively affect
727 performance due to increased calls to the operating system's
728 memory manager, but may improve performance when accessing
729 a large number of large pack files.
730 +
731 Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
732 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
733 be reasonable for all users/operating systems. You probably do
734 not need to adjust this value.
735 +
736 Common unit suffixes of 'k', 'm', or 'g' are supported.
738 core.packedGitLimit::
739 Maximum number of bytes to map simultaneously into memory
740 from pack files. If Git needs to access more than this many
741 bytes at once to complete an operation it will unmap existing
742 regions to reclaim virtual address space within the process.
743 +
744 Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
745 unlimited) on 64 bit platforms.
746 This should be reasonable for all users/operating systems, except on
747 the largest projects. You probably do not need to adjust this value.
748 +
749 Common unit suffixes of 'k', 'm', or 'g' are supported.
751 core.deltaBaseCacheLimit::
752 Maximum number of bytes to reserve for caching base objects
753 that may be referenced by multiple deltified objects. By storing the
754 entire decompressed base objects in a cache Git is able
755 to avoid unpacking and decompressing frequently used base
756 objects multiple times.
757 +
758 Default is 96 MiB on all platforms. This should be reasonable
759 for all users/operating systems, except on the largest projects.
760 You probably do not need to adjust this value.
761 +
762 Common unit suffixes of 'k', 'm', or 'g' are supported.
764 core.bigFileThreshold::
765 Files larger than this size are stored deflated, without
766 attempting delta compression. Storing large files without
767 delta compression avoids excessive memory usage, at the
768 slight expense of increased disk usage. Additionally files
769 larger than this size are always treated as binary.
770 +
771 Default is 512 MiB on all platforms. This should be reasonable
772 for most projects as source code and other text files can still
773 be delta compressed, but larger binary media files won't be.
774 +
775 Common unit suffixes of 'k', 'm', or 'g' are supported.
777 core.excludesFile::
778 Specifies the pathname to the file that contains patterns to
779 describe paths that are not meant to be tracked, in addition
780 to '.gitignore' (per-directory) and '.git/info/exclude'.
781 Defaults to `$XDG_CONFIG_HOME/git/ignore`.
782 If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore`
783 is used instead. See linkgit:gitignore[5].
785 core.askPass::
786 Some commands (e.g. svn and http interfaces) that interactively
787 ask for a password can be told to use an external program given
788 via the value of this variable. Can be overridden by the `GIT_ASKPASS`
789 environment variable. If not set, fall back to the value of the
790 `SSH_ASKPASS` environment variable or, failing that, a simple password
791 prompt. The external program shall be given a suitable prompt as
792 command-line argument and write the password on its STDOUT.
794 core.attributesFile::
795 In addition to '.gitattributes' (per-directory) and
796 '.git/info/attributes', Git looks into this file for attributes
797 (see linkgit:gitattributes[5]). Path expansions are made the same
798 way as for `core.excludesFile`. Its default value is
799 `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not
800 set or empty, `$HOME/.config/git/attributes` is used instead.
802 core.hooksPath::
803 By default Git will look for your hooks in the
804 '$GIT_DIR/hooks' directory. Set this to different path,
805 e.g. '/etc/git/hooks', and Git will try to find your hooks in
806 that directory, e.g. '/etc/git/hooks/pre-receive' instead of
807 in '$GIT_DIR/hooks/pre-receive'.
808 +
809 The path can be either absolute or relative. A relative path is
810 taken as relative to the directory where the hooks are run (see
811 the "DESCRIPTION" section of linkgit:githooks[5]).
812 +
813 This configuration variable is useful in cases where you'd like to
814 centrally configure your Git hooks instead of configuring them on a
815 per-repository basis, or as a more flexible and centralized
816 alternative to having an `init.templateDir` where you've changed
817 default hooks.
819 core.editor::
820 Commands such as `commit` and `tag` that let you edit
821 messages by launching an editor use the value of this
822 variable when it is set, and the environment variable
823 `GIT_EDITOR` is not set. See linkgit:git-var[1].
825 core.commentChar::
826 Commands such as `commit` and `tag` that let you edit
827 messages consider a line that begins with this character
828 commented, and removes them after the editor returns
829 (default '#').
830 +
831 If set to "auto", `git-commit` would select a character that is not
832 the beginning character of any line in existing commit messages.
834 core.filesRefLockTimeout::
835 The length of time, in milliseconds, to retry when trying to
836 lock an individual reference. Value 0 means not to retry at
837 all; -1 means to try indefinitely. Default is 100 (i.e.,
838 retry for 100ms).
840 core.packedRefsTimeout::
841 The length of time, in milliseconds, to retry when trying to
842 lock the `packed-refs` file. Value 0 means not to retry at
843 all; -1 means to try indefinitely. Default is 1000 (i.e.,
844 retry for 1 second).
846 sequence.editor::
847 Text editor used by `git rebase -i` for editing the rebase instruction file.
848 The value is meant to be interpreted by the shell when it is used.
849 It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
850 When not configured the default commit message editor is used instead.
852 core.pager::
853 Text viewer for use by Git commands (e.g., 'less'). The value
854 is meant to be interpreted by the shell. The order of preference
855 is the `$GIT_PAGER` environment variable, then `core.pager`
856 configuration, then `$PAGER`, and then the default chosen at
857 compile time (usually 'less').
858 +
859 When the `LESS` environment variable is unset, Git sets it to `FRX`
860 (if `LESS` environment variable is set, Git does not change it at
861 all). If you want to selectively override Git's default setting
862 for `LESS`, you can set `core.pager` to e.g. `less -S`. This will
863 be passed to the shell by Git, which will translate the final
864 command to `LESS=FRX less -S`. The environment does not set the
865 `S` option but the command line does, instructing less to truncate
866 long lines. Similarly, setting `core.pager` to `less -+F` will
867 deactivate the `F` option specified by the environment from the
868 command-line, deactivating the "quit if one screen" behavior of
869 `less`. One can specifically activate some flags for particular
870 commands: for example, setting `pager.blame` to `less -S` enables
871 line truncation only for `git blame`.
872 +
873 Likewise, when the `LV` environment variable is unset, Git sets it
874 to `-c`. You can override this setting by exporting `LV` with
875 another value or setting `core.pager` to `lv +c`.
877 core.whitespace::
878 A comma separated list of common whitespace problems to
879 notice. 'git diff' will use `color.diff.whitespace` to
880 highlight them, and 'git apply --whitespace=error' will
881 consider them as errors. You can prefix `-` to disable
882 any of them (e.g. `-trailing-space`):
883 +
884 * `blank-at-eol` treats trailing whitespaces at the end of the line
885 as an error (enabled by default).
886 * `space-before-tab` treats a space character that appears immediately
887 before a tab character in the initial indent part of the line as an
888 error (enabled by default).
889 * `indent-with-non-tab` treats a line that is indented with space
890 characters instead of the equivalent tabs as an error (not enabled by
891 default).
892 * `tab-in-indent` treats a tab character in the initial indent part of
893 the line as an error (not enabled by default).
894 * `blank-at-eof` treats blank lines added at the end of file as an error
895 (enabled by default).
896 * `trailing-space` is a short-hand to cover both `blank-at-eol` and
897 `blank-at-eof`.
898 * `cr-at-eol` treats a carriage-return at the end of line as
899 part of the line terminator, i.e. with it, `trailing-space`
900 does not trigger if the character before such a carriage-return
901 is not a whitespace (not enabled by default).
902 * `tabwidth=<n>` tells how many character positions a tab occupies; this
903 is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
904 errors. The default tab width is 8. Allowed values are 1 to 63.
906 core.fsyncObjectFiles::
907 This boolean will enable 'fsync()' when writing object files.
908 +
909 This is a total waste of time and effort on a filesystem that orders
910 data writes properly, but can be useful for filesystems that do not use
911 journalling (traditional UNIX filesystems) or that only journal metadata
912 and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
914 core.preloadIndex::
915 Enable parallel index preload for operations like 'git diff'
916 +
917 This can speed up operations like 'git diff' and 'git status' especially
918 on filesystems like NFS that have weak caching semantics and thus
919 relatively high IO latencies. When enabled, Git will do the
920 index comparison to the filesystem data in parallel, allowing
921 overlapping IO's. Defaults to true.
923 core.createObject::
924 You can set this to 'link', in which case a hardlink followed by
925 a delete of the source are used to make sure that object creation
926 will not overwrite existing objects.
927 +
928 On some file system/operating system combinations, this is unreliable.
929 Set this config setting to 'rename' there; However, This will remove the
930 check that makes sure that existing object files will not get overwritten.
932 core.notesRef::
933 When showing commit messages, also show notes which are stored in
934 the given ref. The ref must be fully qualified. If the given
935 ref does not exist, it is not an error but means that no
936 notes should be printed.
937 +
938 This setting defaults to "refs/notes/commits", and it can be overridden by
939 the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1].
941 core.commitGraph::
942 If true, then git will read the commit-graph file (if it exists)
943 to parse the graph structure of commits. Defaults to false. See
944 linkgit:git-commit-graph[1] for more information.
946 core.useReplaceRefs::
947 If set to `false`, behave as if the `--no-replace-objects`
948 option was given on the command line. See linkgit:git[1] and
949 linkgit:git-replace[1] for more information.
951 core.sparseCheckout::
952 Enable "sparse checkout" feature. See section "Sparse checkout" in
953 linkgit:git-read-tree[1] for more information.
955 core.abbrev::
956 Set the length object names are abbreviated to. If
957 unspecified or set to "auto", an appropriate value is
958 computed based on the approximate number of packed objects
959 in your repository, which hopefully is enough for
960 abbreviated object names to stay unique for some time.
961 The minimum length is 4.
963 add.ignoreErrors::
964 add.ignore-errors (deprecated)::
965 Tells 'git add' to continue adding files when some files cannot be
966 added due to indexing errors. Equivalent to the `--ignore-errors`
967 option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
968 as it does not follow the usual naming convention for configuration
969 variables.
971 alias.*::
972 Command aliases for the linkgit:git[1] command wrapper - e.g.
973 after defining "alias.last = cat-file commit HEAD", the invocation
974 "git last" is equivalent to "git cat-file commit HEAD". To avoid
975 confusion and troubles with script usage, aliases that
976 hide existing Git commands are ignored. Arguments are split by
977 spaces, the usual shell quoting and escaping is supported.
978 A quote pair or a backslash can be used to quote them.
979 +
980 If the alias expansion is prefixed with an exclamation point,
981 it will be treated as a shell command. For example, defining
982 "alias.new = !gitk --all --not ORIG_HEAD", the invocation
983 "git new" is equivalent to running the shell command
984 "gitk --all --not ORIG_HEAD". Note that shell commands will be
985 executed from the top-level directory of a repository, which may
986 not necessarily be the current directory.
987 `GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix'
988 from the original current directory. See linkgit:git-rev-parse[1].
990 am.keepcr::
991 If true, git-am will call git-mailsplit for patches in mbox format
992 with parameter `--keep-cr`. In this case git-mailsplit will
993 not remove `\r` from lines ending with `\r\n`. Can be overridden
994 by giving `--no-keep-cr` from the command line.
995 See linkgit:git-am[1], linkgit:git-mailsplit[1].
997 am.threeWay::
998 By default, `git am` will fail if the patch does not apply cleanly. When
999 set to true, this setting tells `git am` to fall back on 3-way merge if
1000 the patch records the identity of blobs it is supposed to apply to and
1001 we have those blobs available locally (equivalent to giving the `--3way`
1002 option from the command line). Defaults to `false`.
1003 See linkgit:git-am[1].
1005 apply.ignoreWhitespace::
1006 When set to 'change', tells 'git apply' to ignore changes in
1007 whitespace, in the same way as the `--ignore-space-change`
1008 option.
1009 When set to one of: no, none, never, false tells 'git apply' to
1010 respect all whitespace differences.
1011 See linkgit:git-apply[1].
1013 apply.whitespace::
1014 Tells 'git apply' how to handle whitespaces, in the same way
1015 as the `--whitespace` option. See linkgit:git-apply[1].
1017 blame.blankBoundary::
1018 Show blank commit object name for boundary commits in
1019 linkgit:git-blame[1]. This option defaults to false.
1021 blame.coloring::
1022 This determines the coloring scheme to be applied to blame
1023 output. It can be 'repeatedLines', 'highlightRecent',
1024 or 'none' which is the default.
1026 blame.date::
1027 Specifies the format used to output dates in linkgit:git-blame[1].
1028 If unset the iso format is used. For supported values,
1029 see the discussion of the `--date` option at linkgit:git-log[1].
1031 blame.showEmail::
1032 Show the author email instead of author name in linkgit:git-blame[1].
1033 This option defaults to false.
1035 blame.showRoot::
1036 Do not treat root commits as boundaries in linkgit:git-blame[1].
1037 This option defaults to false.
1039 branch.autoSetupMerge::
1040 Tells 'git branch' and 'git checkout' to set up new branches
1041 so that linkgit:git-pull[1] will appropriately merge from the
1042 starting point branch. Note that even if this option is not set,
1043 this behavior can be chosen per-branch using the `--track`
1044 and `--no-track` options. The valid settings are: `false` -- no
1045 automatic setup is done; `true` -- automatic setup is done when the
1046 starting point is a remote-tracking branch; `always` --
1047 automatic setup is done when the starting point is either a
1048 local branch or remote-tracking
1049 branch. This option defaults to true.
1051 branch.autoSetupRebase::
1052 When a new branch is created with 'git branch' or 'git checkout'
1053 that tracks another branch, this variable tells Git to set
1054 up pull to rebase instead of merge (see "branch.<name>.rebase").
1055 When `never`, rebase is never automatically set to true.
1056 When `local`, rebase is set to true for tracked branches of
1057 other local branches.
1058 When `remote`, rebase is set to true for tracked branches of
1059 remote-tracking branches.
1060 When `always`, rebase will be set to true for all tracking
1061 branches.
1062 See "branch.autoSetupMerge" for details on how to set up a
1063 branch to track another branch.
1064 This option defaults to never.
1066 branch.sort::
1067 This variable controls the sort ordering of branches when displayed by
1068 linkgit:git-branch[1]. Without the "--sort=<value>" option provided, the
1069 value of this variable will be used as the default.
1070 See linkgit:git-for-each-ref[1] field names for valid values.
1072 branch.<name>.remote::
1073 When on branch <name>, it tells 'git fetch' and 'git push'
1074 which remote to fetch from/push to. The remote to push to
1075 may be overridden with `remote.pushDefault` (for all branches).
1076 The remote to push to, for the current branch, may be further
1077 overridden by `branch.<name>.pushRemote`. If no remote is
1078 configured, or if you are not on any branch, it defaults to
1079 `origin` for fetching and `remote.pushDefault` for pushing.
1080 Additionally, `.` (a period) is the current local repository
1081 (a dot-repository), see `branch.<name>.merge`'s final note below.
1083 branch.<name>.pushRemote::
1084 When on branch <name>, it overrides `branch.<name>.remote` for
1085 pushing. It also overrides `remote.pushDefault` for pushing
1086 from branch <name>. When you pull from one place (e.g. your
1087 upstream) and push to another place (e.g. your own publishing
1088 repository), you would want to set `remote.pushDefault` to
1089 specify the remote to push to for all branches, and use this
1090 option to override it for a specific branch.
1092 branch.<name>.merge::
1093 Defines, together with branch.<name>.remote, the upstream branch
1094 for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
1095 branch to merge and can also affect 'git push' (see push.default).
1096 When in branch <name>, it tells 'git fetch' the default
1097 refspec to be marked for merging in FETCH_HEAD. The value is
1098 handled like the remote part of a refspec, and must match a
1099 ref which is fetched from the remote given by
1100 "branch.<name>.remote".
1101 The merge information is used by 'git pull' (which at first calls
1102 'git fetch') to lookup the default branch for merging. Without
1103 this option, 'git pull' defaults to merge the first refspec fetched.
1104 Specify multiple values to get an octopus merge.
1105 If you wish to setup 'git pull' so that it merges into <name> from
1106 another branch in the local repository, you can point
1107 branch.<name>.merge to the desired branch, and use the relative path
1108 setting `.` (a period) for branch.<name>.remote.
1110 branch.<name>.mergeOptions::
1111 Sets default options for merging into branch <name>. The syntax and
1112 supported options are the same as those of linkgit:git-merge[1], but
1113 option values containing whitespace characters are currently not
1114 supported.
1116 branch.<name>.rebase::
1117 When true, rebase the branch <name> on top of the fetched branch,
1118 instead of merging the default branch from the default remote when
1119 "git pull" is run. See "pull.rebase" for doing this in a non
1120 branch-specific manner.
1121 +
1122 When `merges`, pass the `--rebase-merges` option to 'git rebase'
1123 so that the local merge commits are included in the rebase (see
1124 linkgit:git-rebase[1] for details).
1125 +
1126 When preserve, also pass `--preserve-merges` along to 'git rebase'
1127 so that locally committed merge commits will not be flattened
1128 by running 'git pull'.
1129 +
1130 When the value is `interactive`, the rebase is run in interactive mode.
1131 +
1132 *NOTE*: this is a possibly dangerous operation; do *not* use
1133 it unless you understand the implications (see linkgit:git-rebase[1]
1134 for details).
1136 branch.<name>.description::
1137 Branch description, can be edited with
1138 `git branch --edit-description`. Branch description is
1139 automatically added in the format-patch cover letter or
1140 request-pull summary.
1142 browser.<tool>.cmd::
1143 Specify the command to invoke the specified browser. The
1144 specified command is evaluated in shell with the URLs passed
1145 as arguments. (See linkgit:git-web{litdd}browse[1].)
1147 browser.<tool>.path::
1148 Override the path for the given tool that may be used to
1149 browse HTML help (see `-w` option in linkgit:git-help[1]) or a
1150 working repository in gitweb (see linkgit:git-instaweb[1]).
1152 checkout.defaultRemote::
1153 When you run 'git checkout <something>' and only have one
1154 remote, it may implicitly fall back on checking out and
1155 tracking e.g. 'origin/<something>'. This stops working as soon
1156 as you have more than one remote with a '<something>'
1157 reference. This setting allows for setting the name of a
1158 preferred remote that should always win when it comes to
1159 disambiguation. The typical use-case is to set this to
1160 `origin`.
1161 +
1162 Currently this is used by linkgit:git-checkout[1] when 'git checkout
1163 <something>' will checkout the '<something>' branch on another remote,
1164 and by linkgit:git-worktree[1] when 'git worktree add' refers to a
1165 remote branch. This setting might be used for other checkout-like
1166 commands or functionality in the future.
1168 clean.requireForce::
1169 A boolean to make git-clean do nothing unless given -f,
1170 -i or -n. Defaults to true.
1172 color.advice::
1173 A boolean to enable/disable color in hints (e.g. when a push
1174 failed, see `advice.*` for a list). May be set to `always`,
1175 `false` (or `never`) or `auto` (or `true`), in which case colors
1176 are used only when the error output goes to a terminal. If
1177 unset, then the value of `color.ui` is used (`auto` by default).
1179 color.advice.hint::
1180 Use customized color for hints.
1182 color.blame.highlightRecent::
1183 This can be used to color the metadata of a blame line depending
1184 on age of the line.
1185 +
1186 This setting should be set to a comma-separated list of color and date settings,
1187 starting and ending with a color, the dates should be set from oldest to newest.
1188 The metadata will be colored given the colors if the the line was introduced
1189 before the given timestamp, overwriting older timestamped colors.
1190 +
1191 Instead of an absolute timestamp relative timestamps work as well, e.g.
1192 2.weeks.ago is valid to address anything older than 2 weeks.
1193 +
1194 It defaults to 'blue,12 month ago,white,1 month ago,red', which colors
1195 everything older than one year blue, recent changes between one month and
1196 one year old are kept white, and lines introduced within the last month are
1197 colored red.
1199 color.blame.repeatedLines::
1200 Use the customized color for the part of git-blame output that
1201 is repeated meta information per line (such as commit id,
1202 author name, date and timezone). Defaults to cyan.
1204 color.branch::
1205 A boolean to enable/disable color in the output of
1206 linkgit:git-branch[1]. May be set to `always`,
1207 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1208 only when the output is to a terminal. If unset, then the
1209 value of `color.ui` is used (`auto` by default).
1211 color.branch.<slot>::
1212 Use customized color for branch coloration. `<slot>` is one of
1213 `current` (the current branch), `local` (a local branch),
1214 `remote` (a remote-tracking branch in refs/remotes/),
1215 `upstream` (upstream tracking branch), `plain` (other
1216 refs).
1218 color.diff::
1219 Whether to use ANSI escape sequences to add color to patches.
1220 If this is set to `always`, linkgit:git-diff[1],
1221 linkgit:git-log[1], and linkgit:git-show[1] will use color
1222 for all patches. If it is set to `true` or `auto`, those
1223 commands will only use color when output is to the terminal.
1224 If unset, then the value of `color.ui` is used (`auto` by
1225 default).
1226 +
1227 This does not affect linkgit:git-format-patch[1] or the
1228 'git-diff-{asterisk}' plumbing commands. Can be overridden on the
1229 command line with the `--color[=<when>]` option.
1231 color.diff.<slot>::
1232 Use customized color for diff colorization. `<slot>` specifies
1233 which part of the patch to use the specified color, and is one
1234 of `context` (context text - `plain` is a historical synonym),
1235 `meta` (metainformation), `frag`
1236 (hunk header), 'func' (function in hunk header), `old` (removed lines),
1237 `new` (added lines), `commit` (commit headers), `whitespace`
1238 (highlighting whitespace errors), `oldMoved` (deleted lines),
1239 `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
1240 `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
1241 `newMovedAlternativeDimmed` (See the '<mode>'
1242 setting of '--color-moved' in linkgit:git-diff[1] for details),
1243 `contextDimmed`, `oldDimmed`, `newDimmed`, `contextBold`,
1244 `oldBold`, and `newBold` (see linkgit:git-range-diff[1] for details).
1246 color.decorate.<slot>::
1247 Use customized color for 'git log --decorate' output. `<slot>` is one
1248 of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
1249 branches, remote-tracking branches, tags, stash and HEAD, respectively
1250 and `grafted` for grafted commits.
1252 color.grep::
1253 When set to `always`, always highlight matches. When `false` (or
1254 `never`), never. When set to `true` or `auto`, use color only
1255 when the output is written to the terminal. If unset, then the
1256 value of `color.ui` is used (`auto` by default).
1258 color.grep.<slot>::
1259 Use customized color for grep colorization. `<slot>` specifies which
1260 part of the line to use the specified color, and is one of
1261 +
1262 --
1263 `context`;;
1264 non-matching text in context lines (when using `-A`, `-B`, or `-C`)
1265 `filename`;;
1266 filename prefix (when not using `-h`)
1267 `function`;;
1268 function name lines (when using `-p`)
1269 `lineNumber`;;
1270 line number prefix (when using `-n`)
1271 `column`;;
1272 column number prefix (when using `--column`)
1273 `match`;;
1274 matching text (same as setting `matchContext` and `matchSelected`)
1275 `matchContext`;;
1276 matching text in context lines
1277 `matchSelected`;;
1278 matching text in selected lines
1279 `selected`;;
1280 non-matching text in selected lines
1281 `separator`;;
1282 separators between fields on a line (`:`, `-`, and `=`)
1283 and between hunks (`--`)
1284 --
1286 color.interactive::
1287 When set to `always`, always use colors for interactive prompts
1288 and displays (such as those used by "git-add --interactive" and
1289 "git-clean --interactive"). When false (or `never`), never.
1290 When set to `true` or `auto`, use colors only when the output is
1291 to the terminal. If unset, then the value of `color.ui` is
1292 used (`auto` by default).
1294 color.interactive.<slot>::
1295 Use customized color for 'git add --interactive' and 'git clean
1296 --interactive' output. `<slot>` may be `prompt`, `header`, `help`
1297 or `error`, for four distinct types of normal output from
1298 interactive commands.
1300 color.pager::
1301 A boolean to enable/disable colored output when the pager is in
1302 use (default is true).
1304 color.push::
1305 A boolean to enable/disable color in push errors. May be set to
1306 `always`, `false` (or `never`) or `auto` (or `true`), in which
1307 case colors are used only when the error output goes to a terminal.
1308 If unset, then the value of `color.ui` is used (`auto` by default).
1310 color.push.error::
1311 Use customized color for push errors.
1313 color.remote::
1314 If set, keywords at the start of the line are highlighted. The
1315 keywords are "error", "warning", "hint" and "success", and are
1316 matched case-insensitively. May be set to `always`, `false` (or
1317 `never`) or `auto` (or `true`). If unset, then the value of
1318 `color.ui` is used (`auto` by default).
1320 color.remote.<slot>::
1321 Use customized color for each remote keyword. `<slot>` may be
1322 `hint`, `warning`, `success` or `error` which match the
1323 corresponding keyword.
1325 color.showBranch::
1326 A boolean to enable/disable color in the output of
1327 linkgit:git-show-branch[1]. May be set to `always`,
1328 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1329 only when the output is to a terminal. If unset, then the
1330 value of `color.ui` is used (`auto` by default).
1332 color.status::
1333 A boolean to enable/disable color in the output of
1334 linkgit:git-status[1]. May be set to `always`,
1335 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1336 only when the output is to a terminal. If unset, then the
1337 value of `color.ui` is used (`auto` by default).
1339 color.status.<slot>::
1340 Use customized color for status colorization. `<slot>` is
1341 one of `header` (the header text of the status message),
1342 `added` or `updated` (files which are added but not committed),
1343 `changed` (files which are changed but not added in the index),
1344 `untracked` (files which are not tracked by Git),
1345 `branch` (the current branch),
1346 `nobranch` (the color the 'no branch' warning is shown in, defaulting
1347 to red),
1348 `localBranch` or `remoteBranch` (the local and remote branch names,
1349 respectively, when branch and tracking information is displayed in the
1350 status short-format), or
1351 `unmerged` (files which have unmerged changes).
1353 color.transport::
1354 A boolean to enable/disable color when pushes are rejected. May be
1355 set to `always`, `false` (or `never`) or `auto` (or `true`), in which
1356 case colors are used only when the error output goes to a terminal.
1357 If unset, then the value of `color.ui` is used (`auto` by default).
1359 color.transport.rejected::
1360 Use customized color when a push was rejected.
1362 color.ui::
1363 This variable determines the default value for variables such
1364 as `color.diff` and `color.grep` that control the use of color
1365 per command family. Its scope will expand as more commands learn
1366 configuration to set a default for the `--color` option. Set it
1367 to `false` or `never` if you prefer Git commands not to use
1368 color unless enabled explicitly with some other configuration
1369 or the `--color` option. Set it to `always` if you want all
1370 output not intended for machine consumption to use color, to
1371 `true` or `auto` (this is the default since Git 1.8.4) if you
1372 want such output to use color when written to the terminal.
1374 column.ui::
1375 Specify whether supported commands should output in columns.
1376 This variable consists of a list of tokens separated by spaces
1377 or commas:
1378 +
1379 These options control when the feature should be enabled
1380 (defaults to 'never'):
1381 +
1382 --
1383 `always`;;
1384 always show in columns
1385 `never`;;
1386 never show in columns
1387 `auto`;;
1388 show in columns if the output is to the terminal
1389 --
1390 +
1391 These options control layout (defaults to 'column'). Setting any
1392 of these implies 'always' if none of 'always', 'never', or 'auto' are
1393 specified.
1394 +
1395 --
1396 `column`;;
1397 fill columns before rows
1398 `row`;;
1399 fill rows before columns
1400 `plain`;;
1401 show in one column
1402 --
1403 +
1404 Finally, these options can be combined with a layout option (defaults
1405 to 'nodense'):
1406 +
1407 --
1408 `dense`;;
1409 make unequal size columns to utilize more space
1410 `nodense`;;
1411 make equal size columns
1412 --
1414 column.branch::
1415 Specify whether to output branch listing in `git branch` in columns.
1416 See `column.ui` for details.
1418 column.clean::
1419 Specify the layout when list items in `git clean -i`, which always
1420 shows files and directories in columns. See `column.ui` for details.
1422 column.status::
1423 Specify whether to output untracked files in `git status` in columns.
1424 See `column.ui` for details.
1426 column.tag::
1427 Specify whether to output tag listing in `git tag` in columns.
1428 See `column.ui` for details.
1430 commit.cleanup::
1431 This setting overrides the default of the `--cleanup` option in
1432 `git commit`. See linkgit:git-commit[1] for details. Changing the
1433 default can be useful when you always want to keep lines that begin
1434 with comment character `#` in your log message, in which case you
1435 would do `git config commit.cleanup whitespace` (note that you will
1436 have to remove the help lines that begin with `#` in the commit log
1437 template yourself, if you do this).
1439 commit.gpgSign::
1441 A boolean to specify whether all commits should be GPG signed.
1442 Use of this option when doing operations such as rebase can
1443 result in a large number of commits being signed. It may be
1444 convenient to use an agent to avoid typing your GPG passphrase
1445 several times.
1447 commit.status::
1448 A boolean to enable/disable inclusion of status information in the
1449 commit message template when using an editor to prepare the commit
1450 message. Defaults to true.
1452 commit.template::
1453 Specify the pathname of a file to use as the template for
1454 new commit messages.
1456 commit.verbose::
1457 A boolean or int to specify the level of verbose with `git commit`.
1458 See linkgit:git-commit[1].
1460 credential.helper::
1461 Specify an external helper to be called when a username or
1462 password credential is needed; the helper may consult external
1463 storage to avoid prompting the user for the credentials. Note
1464 that multiple helpers may be defined. See linkgit:gitcredentials[7]
1465 for details.
1467 credential.useHttpPath::
1468 When acquiring credentials, consider the "path" component of an http
1469 or https URL to be important. Defaults to false. See
1470 linkgit:gitcredentials[7] for more information.
1472 credential.username::
1473 If no username is set for a network authentication, use this username
1474 by default. See credential.<context>.* below, and
1475 linkgit:gitcredentials[7].
1477 credential.<url>.*::
1478 Any of the credential.* options above can be applied selectively to
1479 some credentials. For example "credential.https://example.com.username"
1480 would set the default username only for https connections to
1481 example.com. See linkgit:gitcredentials[7] for details on how URLs are
1482 matched.
1484 credentialCache.ignoreSIGHUP::
1485 Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting.
1487 completion.commands::
1488 This is only used by git-completion.bash to add or remove
1489 commands from the list of completed commands. Normally only
1490 porcelain commands and a few select others are completed. You
1491 can add more commands, separated by space, in this
1492 variable. Prefixing the command with '-' will remove it from
1493 the existing list.
1495 include::diff-config.txt[]
1497 difftool.<tool>.path::
1498 Override the path for the given tool. This is useful in case
1499 your tool is not in the PATH.
1501 difftool.<tool>.cmd::
1502 Specify the command to invoke the specified diff tool.
1503 The specified command is evaluated in shell with the following
1504 variables available: 'LOCAL' is set to the name of the temporary
1505 file containing the contents of the diff pre-image and 'REMOTE'
1506 is set to the name of the temporary file containing the contents
1507 of the diff post-image.
1509 difftool.prompt::
1510 Prompt before each invocation of the diff tool.
1512 fastimport.unpackLimit::
1513 If the number of objects imported by linkgit:git-fast-import[1]
1514 is below this limit, then the objects will be unpacked into
1515 loose object files. However if the number of imported objects
1516 equals or exceeds this limit then the pack will be stored as a
1517 pack. Storing the pack from a fast-import can make the import
1518 operation complete faster, especially on slow filesystems. If
1519 not set, the value of `transfer.unpackLimit` is used instead.
1521 fetch.recurseSubmodules::
1522 This option can be either set to a boolean value or to 'on-demand'.
1523 Setting it to a boolean changes the behavior of fetch and pull to
1524 unconditionally recurse into submodules when set to true or to not
1525 recurse at all when set to false. When set to 'on-demand' (the default
1526 value), fetch and pull will only recurse into a populated submodule
1527 when its superproject retrieves a commit that updates the submodule's
1528 reference.
1530 fetch.fsckObjects::
1531 If it is set to true, git-fetch-pack will check all fetched
1532 objects. See `transfer.fsckObjects` for what's
1533 checked. Defaults to false. If not set, the value of
1534 `transfer.fsckObjects` is used instead.
1536 fetch.fsck.<msg-id>::
1537 Acts like `fsck.<msg-id>`, but is used by
1538 linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See
1539 the `fsck.<msg-id>` documentation for details.
1541 fetch.fsck.skipList::
1542 Acts like `fsck.skipList`, but is used by
1543 linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See
1544 the `fsck.skipList` documentation for details.
1546 fetch.unpackLimit::
1547 If the number of objects fetched over the Git native
1548 transfer is below this
1549 limit, then the objects will be unpacked into loose object
1550 files. However if the number of received objects equals or
1551 exceeds this limit then the received pack will be stored as
1552 a pack, after adding any missing delta bases. Storing the
1553 pack from a push can make the push operation complete faster,
1554 especially on slow filesystems. If not set, the value of
1555 `transfer.unpackLimit` is used instead.
1557 fetch.prune::
1558 If true, fetch will automatically behave as if the `--prune`
1559 option was given on the command line. See also `remote.<name>.prune`
1560 and the PRUNING section of linkgit:git-fetch[1].
1562 fetch.pruneTags::
1563 If true, fetch will automatically behave as if the
1564 `refs/tags/*:refs/tags/*` refspec was provided when pruning,
1565 if not set already. This allows for setting both this option
1566 and `fetch.prune` to maintain a 1=1 mapping to upstream
1567 refs. See also `remote.<name>.pruneTags` and the PRUNING
1568 section of linkgit:git-fetch[1].
1570 fetch.output::
1571 Control how ref update status is printed. Valid values are
1572 `full` and `compact`. Default value is `full`. See section
1573 OUTPUT in linkgit:git-fetch[1] for detail.
1575 fetch.negotiationAlgorithm::
1576 Control how information about the commits in the local repository is
1577 sent when negotiating the contents of the packfile to be sent by the
1578 server. Set to "skipping" to use an algorithm that skips commits in an
1579 effort to converge faster, but may result in a larger-than-necessary
1580 packfile; The default is "default" which instructs Git to use the default algorithm
1581 that never skips commits (unless the server has acknowledged it or one
1582 of its descendants).
1583 Unknown values will cause 'git fetch' to error out.
1584 +
1585 See also the `--negotiation-tip` option for linkgit:git-fetch[1].
1587 format.attach::
1588 Enable multipart/mixed attachments as the default for
1589 'format-patch'. The value can also be a double quoted string
1590 which will enable attachments as the default and set the
1591 value as the boundary. See the --attach option in
1592 linkgit:git-format-patch[1].
1594 format.from::
1595 Provides the default value for the `--from` option to format-patch.
1596 Accepts a boolean value, or a name and email address. If false,
1597 format-patch defaults to `--no-from`, using commit authors directly in
1598 the "From:" field of patch mails. If true, format-patch defaults to
1599 `--from`, using your committer identity in the "From:" field of patch
1600 mails and including a "From:" field in the body of the patch mail if
1601 different. If set to a non-boolean value, format-patch uses that
1602 value instead of your committer identity. Defaults to false.
1604 format.numbered::
1605 A boolean which can enable or disable sequence numbers in patch
1606 subjects. It defaults to "auto" which enables it only if there
1607 is more than one patch. It can be enabled or disabled for all
1608 messages by setting it to "true" or "false". See --numbered
1609 option in linkgit:git-format-patch[1].
1611 format.headers::
1612 Additional email headers to include in a patch to be submitted
1613 by mail. See linkgit:git-format-patch[1].
1615 format.to::
1616 format.cc::
1617 Additional recipients to include in a patch to be submitted
1618 by mail. See the --to and --cc options in
1619 linkgit:git-format-patch[1].
1621 format.subjectPrefix::
1622 The default for format-patch is to output files with the '[PATCH]'
1623 subject prefix. Use this variable to change that prefix.
1625 format.signature::
1626 The default for format-patch is to output a signature containing
1627 the Git version number. Use this variable to change that default.
1628 Set this variable to the empty string ("") to suppress
1629 signature generation.
1631 format.signatureFile::
1632 Works just like format.signature except the contents of the
1633 file specified by this variable will be used as the signature.
1635 format.suffix::
1636 The default for format-patch is to output files with the suffix
1637 `.patch`. Use this variable to change that suffix (make sure to
1638 include the dot if you want it).
1640 format.pretty::
1641 The default pretty format for log/show/whatchanged command,
1642 See linkgit:git-log[1], linkgit:git-show[1],
1643 linkgit:git-whatchanged[1].
1645 format.thread::
1646 The default threading style for 'git format-patch'. Can be
1647 a boolean value, or `shallow` or `deep`. `shallow` threading
1648 makes every mail a reply to the head of the series,
1649 where the head is chosen from the cover letter, the
1650 `--in-reply-to`, and the first patch mail, in this order.
1651 `deep` threading makes every mail a reply to the previous one.
1652 A true boolean value is the same as `shallow`, and a false
1653 value disables threading.
1655 format.signOff::
1656 A boolean value which lets you enable the `-s/--signoff` option of
1657 format-patch by default. *Note:* Adding the Signed-off-by: line to a
1658 patch should be a conscious act and means that you certify you have
1659 the rights to submit this work under the same open source license.
1660 Please see the 'SubmittingPatches' document for further discussion.
1662 format.coverLetter::
1663 A boolean that controls whether to generate a cover-letter when
1664 format-patch is invoked, but in addition can be set to "auto", to
1665 generate a cover-letter only when there's more than one patch.
1667 format.outputDirectory::
1668 Set a custom directory to store the resulting files instead of the
1669 current working directory.
1671 format.useAutoBase::
1672 A boolean value which lets you enable the `--base=auto` option of
1673 format-patch by default.
1675 filter.<driver>.clean::
1676 The command which is used to convert the content of a worktree
1677 file to a blob upon checkin. See linkgit:gitattributes[5] for
1678 details.
1680 filter.<driver>.smudge::
1681 The command which is used to convert the content of a blob
1682 object to a worktree file upon checkout. See
1683 linkgit:gitattributes[5] for details.
1685 fsck.<msg-id>::
1686 During fsck git may find issues with legacy data which
1687 wouldn't be generated by current versions of git, and which
1688 wouldn't be sent over the wire if `transfer.fsckObjects` was
1689 set. This feature is intended to support working with legacy
1690 repositories containing such data.
1691 +
1692 Setting `fsck.<msg-id>` will be picked up by linkgit:git-fsck[1], but
1693 to accept pushes of such data set `receive.fsck.<msg-id>` instead, or
1694 to clone or fetch it set `fetch.fsck.<msg-id>`.
1695 +
1696 The rest of the documentation discusses `fsck.*` for brevity, but the
1697 same applies for the corresponding `receive.fsck.*` and
1698 `fetch.<msg-id>.*`. variables.
1699 +
1700 Unlike variables like `color.ui` and `core.editor` the
1701 `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` variables will not
1702 fall back on the `fsck.<msg-id>` configuration if they aren't set. To
1703 uniformly configure the same fsck settings in different circumstances
1704 all three of them they must all set to the same values.
1705 +
1706 When `fsck.<msg-id>` is set, errors can be switched to warnings and
1707 vice versa by configuring the `fsck.<msg-id>` setting where the
1708 `<msg-id>` is the fsck message ID and the value is one of `error`,
1709 `warn` or `ignore`. For convenience, fsck prefixes the error/warning
1710 with the message ID, e.g. "missingEmail: invalid author/committer line
1711 - missing email" means that setting `fsck.missingEmail = ignore` will
1712 hide that issue.
1713 +
1714 In general, it is better to enumerate existing objects with problems
1715 with `fsck.skipList`, instead of listing the kind of breakages these
1716 problematic objects share to be ignored, as doing the latter will
1717 allow new instances of the same breakages go unnoticed.
1718 +
1719 Setting an unknown `fsck.<msg-id>` value will cause fsck to die, but
1720 doing the same for `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>`
1721 will only cause git to warn.
1723 fsck.skipList::
1724 The path to a sorted list of object names (i.e. one SHA-1 per
1725 line) that are known to be broken in a non-fatal way and should
1726 be ignored. This feature is useful when an established project
1727 should be accepted despite early commits containing errors that
1728 can be safely ignored such as invalid committer email addresses.
1729 Note: corrupt objects cannot be skipped with this setting.
1730 +
1731 Like `fsck.<msg-id>` this variable has corresponding
1732 `receive.fsck.skipList` and `fetch.fsck.skipList` variants.
1733 +
1734 Unlike variables like `color.ui` and `core.editor` the
1735 `receive.fsck.skipList` and `fetch.fsck.skipList` variables will not
1736 fall back on the `fsck.skipList` configuration if they aren't set. To
1737 uniformly configure the same fsck settings in different circumstances
1738 all three of them they must all set to the same values.
1740 gc.aggressiveDepth::
1741 The depth parameter used in the delta compression
1742 algorithm used by 'git gc --aggressive'. This defaults
1743 to 50.
1745 gc.aggressiveWindow::
1746 The window size parameter used in the delta compression
1747 algorithm used by 'git gc --aggressive'. This defaults
1748 to 250.
1750 gc.auto::
1751 When there are approximately more than this many loose
1752 objects in the repository, `git gc --auto` will pack them.
1753 Some Porcelain commands use this command to perform a
1754 light-weight garbage collection from time to time. The
1755 default value is 6700. Setting this to 0 disables it.
1757 gc.autoPackLimit::
1758 When there are more than this many packs that are not
1759 marked with `*.keep` file in the repository, `git gc
1760 --auto` consolidates them into one larger pack. The
1761 default value is 50. Setting this to 0 disables it.
1763 gc.autoDetach::
1764 Make `git gc --auto` return immediately and run in background
1765 if the system supports it. Default is true.
1767 gc.bigPackThreshold::
1768 If non-zero, all packs larger than this limit are kept when
1769 `git gc` is run. This is very similar to `--keep-base-pack`
1770 except that all packs that meet the threshold are kept, not
1771 just the base pack. Defaults to zero. Common unit suffixes of
1772 'k', 'm', or 'g' are supported.
1773 +
1774 Note that if the number of kept packs is more than gc.autoPackLimit,
1775 this configuration variable is ignored, all packs except the base pack
1776 will be repacked. After this the number of packs should go below
1777 gc.autoPackLimit and gc.bigPackThreshold should be respected again.
1779 gc.writeCommitGraph::
1780 If true, then gc will rewrite the commit-graph file when
1781 linkgit:git-gc[1] is run. When using linkgit:git-gc[1]
1782 '--auto' the commit-graph will be updated if housekeeping is
1783 required. Default is false. See linkgit:git-commit-graph[1]
1784 for details.
1786 gc.logExpiry::
1787 If the file gc.log exists, then `git gc --auto` won't run
1788 unless that file is more than 'gc.logExpiry' old. Default is
1789 "1.day". See `gc.pruneExpire` for more ways to specify its
1790 value.
1792 gc.packRefs::
1793 Running `git pack-refs` in a repository renders it
1794 unclonable by Git versions prior to over dumb
1795 transports such as HTTP. This variable determines whether
1796 'git gc' runs `git pack-refs`. This can be set to `notbare`
1797 to enable it within all non-bare repos or it can be set to a
1798 boolean value. The default is `true`.
1800 gc.pruneExpire::
1801 When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
1802 Override the grace period with this config variable. The value
1803 "now" may be used to disable this grace period and always prune
1804 unreachable objects immediately, or "never" may be used to
1805 suppress pruning. This feature helps prevent corruption when
1806 'git gc' runs concurrently with another process writing to the
1807 repository; see the "NOTES" section of linkgit:git-gc[1].
1809 gc.worktreePruneExpire::
1810 When 'git gc' is run, it calls
1811 'git worktree prune --expire 3.months.ago'.
1812 This config variable can be used to set a different grace
1813 period. The value "now" may be used to disable the grace
1814 period and prune `$GIT_DIR/worktrees` immediately, or "never"
1815 may be used to suppress pruning.
1817 gc.reflogExpire::
1818 gc.<pattern>.reflogExpire::
1819 'git reflog expire' removes reflog entries older than
1820 this time; defaults to 90 days. The value "now" expires all
1821 entries immediately, and "never" suppresses expiration
1822 altogether. With "<pattern>" (e.g.
1823 "refs/stash") in the middle the setting applies only to
1824 the refs that match the <pattern>.
1826 gc.reflogExpireUnreachable::
1827 gc.<pattern>.reflogExpireUnreachable::
1828 'git reflog expire' removes reflog entries older than
1829 this time and are not reachable from the current tip;
1830 defaults to 30 days. The value "now" expires all entries
1831 immediately, and "never" suppresses expiration altogether.
1832 With "<pattern>" (e.g. "refs/stash")
1833 in the middle, the setting applies only to the refs that
1834 match the <pattern>.
1836 gc.rerereResolved::
1837 Records of conflicted merge you resolved earlier are
1838 kept for this many days when 'git rerere gc' is run.
1839 You can also use more human-readable "1.month.ago", etc.
1840 The default is 60 days. See linkgit:git-rerere[1].
1842 gc.rerereUnresolved::
1843 Records of conflicted merge you have not resolved are
1844 kept for this many days when 'git rerere gc' is run.
1845 You can also use more human-readable "1.month.ago", etc.
1846 The default is 15 days. See linkgit:git-rerere[1].
1848 gitcvs.commitMsgAnnotation::
1849 Append this string to each commit message. Set to empty string
1850 to disable this feature. Defaults to "via git-CVS emulator".
1852 gitcvs.enabled::
1853 Whether the CVS server interface is enabled for this repository.
1854 See linkgit:git-cvsserver[1].
1856 gitcvs.logFile::
1857 Path to a log file where the CVS server interface well... logs
1858 various stuff. See linkgit:git-cvsserver[1].
1860 gitcvs.usecrlfattr::
1861 If true, the server will look up the end-of-line conversion
1862 attributes for files to determine the `-k` modes to use. If
1863 the attributes force Git to treat a file as text,
1864 the `-k` mode will be left blank so CVS clients will
1865 treat it as text. If they suppress text conversion, the file
1866 will be set with '-kb' mode, which suppresses any newline munging
1867 the client might otherwise do. If the attributes do not allow
1868 the file type to be determined, then `gitcvs.allBinary` is
1869 used. See linkgit:gitattributes[5].
1871 gitcvs.allBinary::
1872 This is used if `gitcvs.usecrlfattr` does not resolve
1873 the correct '-kb' mode to use. If true, all
1874 unresolved files are sent to the client in
1875 mode '-kb'. This causes the client to treat them
1876 as binary files, which suppresses any newline munging it
1877 otherwise might do. Alternatively, if it is set to "guess",
1878 then the contents of the file are examined to decide if
1879 it is binary, similar to `core.autocrlf`.
1881 gitcvs.dbName::
1882 Database used by git-cvsserver to cache revision information
1883 derived from the Git repository. The exact meaning depends on the
1884 used database driver, for SQLite (which is the default driver) this
1885 is a filename. Supports variable substitution (see
1886 linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
1887 Default: '%Ggitcvs.%m.sqlite'
1889 gitcvs.dbDriver::
1890 Used Perl DBI driver. You can specify any available driver
1891 for this here, but it might not work. git-cvsserver is tested
1892 with 'DBD::SQLite', reported to work with 'DBD::Pg', and
1893 reported *not* to work with 'DBD::mysql'. Experimental feature.
1894 May not contain double colons (`:`). Default: 'SQLite'.
1895 See linkgit:git-cvsserver[1].
1897 gitcvs.dbUser, gitcvs.dbPass::
1898 Database user and password. Only useful if setting `gitcvs.dbDriver`,
1899 since SQLite has no concept of database users and/or passwords.
1900 'gitcvs.dbUser' supports variable substitution (see
1901 linkgit:git-cvsserver[1] for details).
1903 gitcvs.dbTableNamePrefix::
1904 Database table name prefix. Prepended to the names of any
1905 database tables used, allowing a single database to be used
1906 for several repositories. Supports variable substitution (see
1907 linkgit:git-cvsserver[1] for details). Any non-alphabetic
1908 characters will be replaced with underscores.
1910 All gitcvs variables except for `gitcvs.usecrlfattr` and
1911 `gitcvs.allBinary` can also be specified as
1912 'gitcvs.<access_method>.<varname>' (where 'access_method'
1913 is one of "ext" and "pserver") to make them apply only for the given
1914 access method.
1916 gitweb.category::
1917 gitweb.description::
1918 gitweb.owner::
1919 gitweb.url::
1920 See linkgit:gitweb[1] for description.
1922 gitweb.avatar::
1923 gitweb.blame::
1924 gitweb.grep::
1925 gitweb.highlight::
1926 gitweb.patches::
1927 gitweb.pickaxe::
1928 gitweb.remote_heads::
1929 gitweb.showSizes::
1930 gitweb.snapshot::
1931 See linkgit:gitweb.conf[5] for description.
1933 grep.lineNumber::
1934 If set to true, enable `-n` option by default.
1936 grep.column::
1937 If set to true, enable the `--column` option by default.
1939 grep.patternType::
1940 Set the default matching behavior. Using a value of 'basic', 'extended',
1941 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`,
1942 `--fixed-strings`, or `--perl-regexp` option accordingly, while the
1943 value 'default' will return to the default matching behavior.
1945 grep.extendedRegexp::
1946 If set to true, enable `--extended-regexp` option by default. This
1947 option is ignored when the `grep.patternType` option is set to a value
1948 other than 'default'.
1950 grep.threads::
1951 Number of grep worker threads to use.
1952 See `grep.threads` in linkgit:git-grep[1] for more information.
1954 grep.fallbackToNoIndex::
1955 If set to true, fall back to git grep --no-index if git grep
1956 is executed outside of a git repository. Defaults to false.
1958 gpg.program::
1959 Use this custom program instead of "`gpg`" found on `$PATH` when
1960 making or verifying a PGP signature. The program must support the
1961 same command-line interface as GPG, namely, to verify a detached
1962 signature, "`gpg --verify $file - <$signature`" is run, and the
1963 program is expected to signal a good signature by exiting with
1964 code 0, and to generate an ASCII-armored detached signature, the
1965 standard input of "`gpg -bsau $key`" is fed with the contents to be
1966 signed, and the program is expected to send the result to its
1967 standard output.
1969 gpg.format::
1970 Specifies which key format to use when signing with `--gpg-sign`.
1971 Default is "openpgp" and another possible value is "x509".
1973 gpg.<format>.program::
1974 Use this to customize the program used for the signing format you
1975 chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still
1976 be used as a legacy synonym for `gpg.openpgp.program`. The default
1977 value for `gpg.x509.program` is "gpgsm".
1979 gui.commitMsgWidth::
1980 Defines how wide the commit message window is in the
1981 linkgit:git-gui[1]. "75" is the default.
1983 gui.diffContext::
1984 Specifies how many context lines should be used in calls to diff
1985 made by the linkgit:git-gui[1]. The default is "5".
1987 gui.displayUntracked::
1988 Determines if linkgit:git-gui[1] shows untracked files
1989 in the file list. The default is "true".
1991 gui.encoding::
1992 Specifies the default encoding to use for displaying of
1993 file contents in linkgit:git-gui[1] and linkgit:gitk[1].
1994 It can be overridden by setting the 'encoding' attribute
1995 for relevant files (see linkgit:gitattributes[5]).
1996 If this option is not set, the tools default to the
1997 locale encoding.
1999 gui.matchTrackingBranch::
2000 Determines if new branches created with linkgit:git-gui[1] should
2001 default to tracking remote branches with matching names or
2002 not. Default: "false".
2004 gui.newBranchTemplate::
2005 Is used as suggested name when creating new branches using the
2006 linkgit:git-gui[1].
2008 gui.pruneDuringFetch::
2009 "true" if linkgit:git-gui[1] should prune remote-tracking branches when
2010 performing a fetch. The default value is "false".
2012 gui.trustmtime::
2013 Determines if linkgit:git-gui[1] should trust the file modification
2014 timestamp or not. By default the timestamps are not trusted.
2016 gui.spellingDictionary::
2017 Specifies the dictionary used for spell checking commit messages in
2018 the linkgit:git-gui[1]. When set to "none" spell checking is turned
2019 off.
2021 gui.fastCopyBlame::
2022 If true, 'git gui blame' uses `-C` instead of `-C -C` for original
2023 location detection. It makes blame significantly faster on huge
2024 repositories at the expense of less thorough copy detection.
2026 gui.copyBlameThreshold::
2027 Specifies the threshold to use in 'git gui blame' original location
2028 detection, measured in alphanumeric characters. See the
2029 linkgit:git-blame[1] manual for more information on copy detection.
2031 gui.blamehistoryctx::
2032 Specifies the radius of history context in days to show in
2033 linkgit:gitk[1] for the selected commit, when the `Show History
2034 Context` menu item is invoked from 'git gui blame'. If this
2035 variable is set to zero, the whole history is shown.
2037 guitool.<name>.cmd::
2038 Specifies the shell command line to execute when the corresponding item
2039 of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
2040 mandatory for every tool. The command is executed from the root of
2041 the working directory, and in the environment it receives the name of
2042 the tool as `GIT_GUITOOL`, the name of the currently selected file as
2043 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
2044 the head is detached, 'CUR_BRANCH' is empty).
2046 guitool.<name>.needsFile::
2047 Run the tool only if a diff is selected in the GUI. It guarantees
2048 that 'FILENAME' is not empty.
2050 guitool.<name>.noConsole::
2051 Run the command silently, without creating a window to display its
2052 output.
2054 guitool.<name>.noRescan::
2055 Don't rescan the working directory for changes after the tool
2056 finishes execution.
2058 guitool.<name>.confirm::
2059 Show a confirmation dialog before actually running the tool.
2061 guitool.<name>.argPrompt::
2062 Request a string argument from the user, and pass it to the tool
2063 through the `ARGS` environment variable. Since requesting an
2064 argument implies confirmation, the 'confirm' option has no effect
2065 if this is enabled. If the option is set to 'true', 'yes', or '1',
2066 the dialog uses a built-in generic prompt; otherwise the exact
2067 value of the variable is used.
2069 guitool.<name>.revPrompt::
2070 Request a single valid revision from the user, and set the
2071 `REVISION` environment variable. In other aspects this option
2072 is similar to 'argPrompt', and can be used together with it.
2074 guitool.<name>.revUnmerged::
2075 Show only unmerged branches in the 'revPrompt' subdialog.
2076 This is useful for tools similar to merge or rebase, but not
2077 for things like checkout or reset.
2079 guitool.<name>.title::
2080 Specifies the title to use for the prompt dialog. The default
2081 is the tool name.
2083 guitool.<name>.prompt::
2084 Specifies the general prompt string to display at the top of
2085 the dialog, before subsections for 'argPrompt' and 'revPrompt'.
2086 The default value includes the actual command.
2088 help.browser::
2089 Specify the browser that will be used to display help in the
2090 'web' format. See linkgit:git-help[1].
2092 help.format::
2093 Override the default help format used by linkgit:git-help[1].
2094 Values 'man', 'info', 'web' and 'html' are supported. 'man' is
2095 the default. 'web' and 'html' are the same.
2097 help.autoCorrect::
2098 Automatically correct and execute mistyped commands after
2099 waiting for the given number of deciseconds (0.1 sec). If more
2100 than one command can be deduced from the entered text, nothing
2101 will be executed. If the value of this option is negative,
2102 the corrected command will be executed immediately. If the
2103 value is 0 - the command will be just shown but not executed.
2104 This is the default.
2106 help.htmlPath::
2107 Specify the path where the HTML documentation resides. File system paths
2108 and URLs are supported. HTML pages will be prefixed with this path when
2109 help is displayed in the 'web' format. This defaults to the documentation
2110 path of your Git installation.
2112 http.proxy::
2113 Override the HTTP proxy, normally configured using the 'http_proxy',
2114 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In
2115 addition to the syntax understood by curl, it is possible to specify a
2116 proxy string with a user name but no password, in which case git will
2117 attempt to acquire one in the same way it does for other credentials. See
2118 linkgit:gitcredentials[7] for more information. The syntax thus is
2119 '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden
2120 on a per-remote basis; see remote.<name>.proxy
2122 http.proxyAuthMethod::
2123 Set the method with which to authenticate against the HTTP proxy. This
2124 only takes effect if the configured proxy string contains a user name part
2125 (i.e. is of the form 'user@host' or 'user@host:port'). This can be
2126 overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`.
2127 Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment
2128 variable. Possible values are:
2129 +
2130 --
2131 * `anyauth` - Automatically pick a suitable authentication method. It is
2132 assumed that the proxy answers an unauthenticated request with a 407
2133 status code and one or more Proxy-authenticate headers with supported
2134 authentication methods. This is the default.
2135 * `basic` - HTTP Basic authentication
2136 * `digest` - HTTP Digest authentication; this prevents the password from being
2137 transmitted to the proxy in clear text
2138 * `negotiate` - GSS-Negotiate authentication (compare the --negotiate option
2139 of `curl(1)`)
2140 * `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`)
2141 --
2143 http.emptyAuth::
2144 Attempt authentication without seeking a username or password. This
2145 can be used to attempt GSS-Negotiate authentication without specifying
2146 a username in the URL, as libcurl normally requires a username for
2147 authentication.
2149 http.delegation::
2150 Control GSSAPI credential delegation. The delegation is disabled
2151 by default in libcurl since version 7.21.7. Set parameter to tell
2152 the server what it is allowed to delegate when it comes to user
2153 credentials. Used with GSS/kerberos. Possible values are:
2154 +
2155 --
2156 * `none` - Don't allow any delegation.
2157 * `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
2158 Kerberos service ticket, which is a matter of realm policy.
2159 * `always` - Unconditionally allow the server to delegate.
2160 --
2163 http.extraHeader::
2164 Pass an additional HTTP header when communicating with a server. If
2165 more than one such entry exists, all of them are added as extra
2166 headers. To allow overriding the settings inherited from the system
2167 config, an empty value will reset the extra headers to the empty list.
2169 http.cookieFile::
2170 The pathname of a file containing previously stored cookie lines,
2171 which should be used
2172 in the Git http session, if they match the server. The file format
2173 of the file to read cookies from should be plain HTTP headers or
2174 the Netscape/Mozilla cookie file format (see `curl(1)`).
2175 NOTE that the file specified with http.cookieFile is used only as
2176 input unless http.saveCookies is set.
2178 http.saveCookies::
2179 If set, store cookies received during requests to the file specified by
2180 http.cookieFile. Has no effect if http.cookieFile is unset.
2182 http.sslVersion::
2183 The SSL version to use when negotiating an SSL connection, if you
2184 want to force the default. The available and default version
2185 depend on whether libcurl was built against NSS or OpenSSL and the
2186 particular configuration of the crypto library in use. Internally
2187 this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
2188 documentation for more details on the format of this option and
2189 for the ssl version supported. Actually the possible values of
2190 this option are:
2192 - sslv2
2193 - sslv3
2194 - tlsv1
2195 - tlsv1.0
2196 - tlsv1.1
2197 - tlsv1.2
2198 - tlsv1.3
2200 +
2201 Can be overridden by the `GIT_SSL_VERSION` environment variable.
2202 To force git to use libcurl's default ssl version and ignore any
2203 explicit http.sslversion option, set `GIT_SSL_VERSION` to the
2204 empty string.
2206 http.sslCipherList::
2207 A list of SSL ciphers to use when negotiating an SSL connection.
2208 The available ciphers depend on whether libcurl was built against
2209 NSS or OpenSSL and the particular configuration of the crypto
2210 library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
2211 option; see the libcurl documentation for more details on the format
2212 of this list.
2213 +
2214 Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable.
2215 To force git to use libcurl's default cipher list and ignore any
2216 explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the
2217 empty string.
2219 http.sslVerify::
2220 Whether to verify the SSL certificate when fetching or pushing
2221 over HTTPS. Defaults to true. Can be overridden by the
2222 `GIT_SSL_NO_VERIFY` environment variable.
2224 http.sslCert::
2225 File containing the SSL certificate when fetching or pushing
2226 over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment
2227 variable.
2229 http.sslKey::
2230 File containing the SSL private key when fetching or pushing
2231 over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment
2232 variable.
2234 http.sslCertPasswordProtected::
2235 Enable Git's password prompt for the SSL certificate. Otherwise
2236 OpenSSL will prompt the user, possibly many times, if the
2237 certificate or private key is encrypted. Can be overridden by the
2238 `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable.
2240 http.sslCAInfo::
2241 File containing the certificates to verify the peer with when
2242 fetching or pushing over HTTPS. Can be overridden by the
2243 `GIT_SSL_CAINFO` environment variable.
2245 http.sslCAPath::
2246 Path containing files with the CA certificates to verify the peer
2247 with when fetching or pushing over HTTPS. Can be overridden
2248 by the `GIT_SSL_CAPATH` environment variable.
2250 http.pinnedpubkey::
2251 Public key of the https service. It may either be the filename of
2252 a PEM or DER encoded public key file or a string starting with
2253 'sha256//' followed by the base64 encoded sha256 hash of the
2254 public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will
2255 exit with an error if this option is set but not supported by
2256 cURL.
2258 http.sslTry::
2259 Attempt to use AUTH SSL/TLS and encrypted data transfers
2260 when connecting via regular FTP protocol. This might be needed
2261 if the FTP server requires it for security reasons or you wish
2262 to connect securely whenever remote FTP server supports it.
2263 Default is false since it might trigger certificate verification
2264 errors on misconfigured servers.
2266 http.maxRequests::
2267 How many HTTP requests to launch in parallel. Can be overridden
2268 by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5.
2270 http.minSessions::
2271 The number of curl sessions (counted across slots) to be kept across
2272 requests. They will not be ended with curl_easy_cleanup() until
2273 http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
2274 value will be capped at 1. Defaults to 1.
2276 http.postBuffer::
2277 Maximum size in bytes of the buffer used by smart HTTP
2278 transports when POSTing data to the remote system.
2279 For requests larger than this buffer size, HTTP/1.1 and
2280 Transfer-Encoding: chunked is used to avoid creating a
2281 massive pack file locally. Default is 1 MiB, which is
2282 sufficient for most requests.
2284 http.lowSpeedLimit, http.lowSpeedTime::
2285 If the HTTP transfer speed is less than 'http.lowSpeedLimit'
2286 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
2287 Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and
2288 `GIT_HTTP_LOW_SPEED_TIME` environment variables.
2290 http.noEPSV::
2291 A boolean which disables using of EPSV ftp command by curl.
2292 This can helpful with some "poor" ftp servers which don't
2293 support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV`
2294 environment variable. Default is false (curl will use EPSV).
2296 http.userAgent::
2297 The HTTP USER_AGENT string presented to an HTTP server. The default
2298 value represents the version of the client Git such as git/1.7.1.
2299 This option allows you to override this value to a more common value
2300 such as Mozilla/4.0. This may be necessary, for instance, if
2301 connecting through a firewall that restricts HTTP connections to a set
2302 of common USER_AGENT strings (but not including those like git/1.7.1).
2303 Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.
2305 http.followRedirects::
2306 Whether git should follow HTTP redirects. If set to `true`, git
2307 will transparently follow any redirect issued by a server it
2308 encounters. If set to `false`, git will treat all redirects as
2309 errors. If set to `initial`, git will follow redirects only for
2310 the initial request to a remote, but not for subsequent
2311 follow-up HTTP requests. Since git uses the redirected URL as
2312 the base for the follow-up requests, this is generally
2313 sufficient. The default is `initial`.
2315 http.<url>.*::
2316 Any of the http.* options above can be applied selectively to some URLs.
2317 For a config key to match a URL, each element of the config key is
2318 compared to that of the URL, in the following order:
2319 +
2320 --
2321 . Scheme (e.g., `https` in `https://example.com/`). This field
2322 must match exactly between the config key and the URL.
2324 . Host/domain name (e.g., `example.com` in `https://example.com/`).
2325 This field must match between the config key and the URL. It is
2326 possible to specify a `*` as part of the host name to match all subdomains
2327 at this level. `https://*.example.com/` for example would match
2328 `https://foo.example.com/`, but not `https://foo.bar.example.com/`.
2330 . Port number (e.g., `8080` in `http://example.com:8080/`).
2331 This field must match exactly between the config key and the URL.
2332 Omitted port numbers are automatically converted to the correct
2333 default for the scheme before matching.
2335 . Path (e.g., `repo.git` in `https://example.com/repo.git`). The
2336 path field of the config key must match the path field of the URL
2337 either exactly or as a prefix of slash-delimited path elements. This means
2338 a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
2339 match on a slash (`/`) boundary. Longer matches take precedence (so a config
2340 key with path `foo/bar` is a better match to URL path `foo/bar` than a config
2341 key with just path `foo/`).
2343 . User name (e.g., `user` in `https://user@example.com/repo.git`). If
2344 the config key has a user name it must match the user name in the
2345 URL exactly. If the config key does not have a user name, that
2346 config key will match a URL with any user name (including none),
2347 but at a lower precedence than a config key with a user name.
2348 --
2349 +
2350 The list above is ordered by decreasing precedence; a URL that matches
2351 a config key's path is preferred to one that matches its user name. For example,
2352 if the URL is `https://user@example.com/foo/bar` a config key match of
2353 `https://example.com/foo` will be preferred over a config key match of
2354 `https://user@example.com`.
2355 +
2356 All URLs are normalized before attempting any matching (the password part,
2357 if embedded in the URL, is always ignored for matching purposes) so that
2358 equivalent URLs that are simply spelled differently will match properly.
2359 Environment variable settings always override any matches. The URLs that are
2360 matched against are those given directly to Git commands. This means any URLs
2361 visited as a result of a redirection do not participate in matching.
2363 ssh.variant::
2364 By default, Git determines the command line arguments to use
2365 based on the basename of the configured SSH command (configured
2366 using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or
2367 the config setting `core.sshCommand`). If the basename is
2368 unrecognized, Git will attempt to detect support of OpenSSH
2369 options by first invoking the configured SSH command with the
2370 `-G` (print configuration) option and will subsequently use
2371 OpenSSH options (if that is successful) or no options besides
2372 the host and remote command (if it fails).
2373 +
2374 The config variable `ssh.variant` can be set to override this detection.
2375 Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`,
2376 `tortoiseplink`, `simple` (no options except the host and remote command).
2377 The default auto-detection can be explicitly requested using the value
2378 `auto`. Any other value is treated as `ssh`. This setting can also be
2379 overridden via the environment variable `GIT_SSH_VARIANT`.
2380 +
2381 The current command-line parameters used for each variant are as
2382 follows:
2383 +
2384 --
2386 * `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command
2388 * `simple` - [username@]host command
2390 * `plink` or `putty` - [-P port] [-4] [-6] [username@]host command
2392 * `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command
2394 --
2395 +
2396 Except for the `simple` variant, command-line parameters are likely to
2397 change as git gains new features.
2399 i18n.commitEncoding::
2400 Character encoding the commit messages are stored in; Git itself
2401 does not care per se, but this information is necessary e.g. when
2402 importing commits from emails or in the gitk graphical history
2403 browser (and possibly at other places in the future or in other
2404 porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
2406 i18n.logOutputEncoding::
2407 Character encoding the commit messages are converted to when
2408 running 'git log' and friends.
2410 imap::
2411 The configuration variables in the 'imap' section are described
2412 in linkgit:git-imap-send[1].
2414 index.version::
2415 Specify the version with which new index files should be
2416 initialized. This does not affect existing repositories.
2418 init.templateDir::
2419 Specify the directory from which templates will be copied.
2420 (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
2422 instaweb.browser::
2423 Specify the program that will be used to browse your working
2424 repository in gitweb. See linkgit:git-instaweb[1].
2426 instaweb.httpd::
2427 The HTTP daemon command-line to start gitweb on your working
2428 repository. See linkgit:git-instaweb[1].
2430 instaweb.local::
2431 If true the web server started by linkgit:git-instaweb[1] will
2432 be bound to the local IP (
2434 instaweb.modulePath::
2435 The default module path for linkgit:git-instaweb[1] to use
2436 instead of /usr/lib/apache2/modules. Only used if httpd
2437 is Apache.
2439 instaweb.port::
2440 The port number to bind the gitweb httpd to. See
2441 linkgit:git-instaweb[1].
2443 interactive.singleKey::
2444 In interactive commands, allow the user to provide one-letter
2445 input with a single key (i.e., without hitting enter).
2446 Currently this is used by the `--patch` mode of
2447 linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
2448 linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
2449 setting is silently ignored if portable keystroke input
2450 is not available; requires the Perl module Term::ReadKey.
2452 interactive.diffFilter::
2453 When an interactive command (such as `git add --patch`) shows
2454 a colorized diff, git will pipe the diff through the shell
2455 command defined by this configuration variable. The command may
2456 mark up the diff further for human consumption, provided that it
2457 retains a one-to-one correspondence with the lines in the
2458 original diff. Defaults to disabled (no filtering).
2460 log.abbrevCommit::
2461 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2462 linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
2463 override this option with `--no-abbrev-commit`.
2465 log.date::
2466 Set the default date-time mode for the 'log' command.
2467 Setting a value for log.date is similar to using 'git log''s
2468 `--date` option. See linkgit:git-log[1] for details.
2470 log.decorate::
2471 Print out the ref names of any commits that are shown by the log
2472 command. If 'short' is specified, the ref name prefixes 'refs/heads/',
2473 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
2474 specified, the full ref name (including prefix) will be printed.
2475 If 'auto' is specified, then if the output is going to a terminal,
2476 the ref names are shown as if 'short' were given, otherwise no ref
2477 names are shown. This is the same as the `--decorate` option
2478 of the `git log`.
2480 log.follow::
2481 If `true`, `git log` will act as if the `--follow` option was used when
2482 a single <path> is given. This has the same limitations as `--follow`,
2483 i.e. it cannot be used to follow multiple files and does not work well
2484 on non-linear history.
2486 log.graphColors::
2487 A list of colors, separated by commas, that can be used to draw
2488 history lines in `git log --graph`.
2490 log.showRoot::
2491 If true, the initial commit will be shown as a big creation event.
2492 This is equivalent to a diff against an empty tree.
2493 Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
2494 normally hide the root commit will now show it. True by default.
2496 log.showSignature::
2497 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2498 linkgit:git-whatchanged[1] assume `--show-signature`.
2500 log.mailmap::
2501 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2502 linkgit:git-whatchanged[1] assume `--use-mailmap`.
2504 mailinfo.scissors::
2505 If true, makes linkgit:git-mailinfo[1] (and therefore
2506 linkgit:git-am[1]) act by default as if the --scissors option
2507 was provided on the command-line. When active, this features
2508 removes everything from the message body before a scissors
2509 line (i.e. consisting mainly of ">8", "8<" and "-").
2511 mailmap.file::
2512 The location of an augmenting mailmap file. The default
2513 mailmap, located in the root of the repository, is loaded
2514 first, then the mailmap file pointed to by this variable.
2515 The location of the mailmap file may be in a repository
2516 subdirectory, or somewhere outside of the repository itself.
2517 See linkgit:git-shortlog[1] and linkgit:git-blame[1].
2519 mailmap.blob::
2520 Like `mailmap.file`, but consider the value as a reference to a
2521 blob in the repository. If both `mailmap.file` and
2522 `mailmap.blob` are given, both are parsed, with entries from
2523 `mailmap.file` taking precedence. In a bare repository, this
2524 defaults to `HEAD:.mailmap`. In a non-bare repository, it
2525 defaults to empty.
2527 man.viewer::
2528 Specify the programs that may be used to display help in the
2529 'man' format. See linkgit:git-help[1].
2531 man.<tool>.cmd::
2532 Specify the command to invoke the specified man viewer. The
2533 specified command is evaluated in shell with the man page
2534 passed as argument. (See linkgit:git-help[1].)
2536 man.<tool>.path::
2537 Override the path for the given tool that may be used to
2538 display help in the 'man' format. See linkgit:git-help[1].
2540 include::merge-config.txt[]
2542 mergetool.<tool>.path::
2543 Override the path for the given tool. This is useful in case
2544 your tool is not in the PATH.
2546 mergetool.<tool>.cmd::
2547 Specify the command to invoke the specified merge tool. The
2548 specified command is evaluated in shell with the following
2549 variables available: 'BASE' is the name of a temporary file
2550 containing the common base of the files to be merged, if available;
2551 'LOCAL' is the name of a temporary file containing the contents of
2552 the file on the current branch; 'REMOTE' is the name of a temporary
2553 file containing the contents of the file from the branch being
2554 merged; 'MERGED' contains the name of the file to which the merge
2555 tool should write the results of a successful merge.
2557 mergetool.<tool>.trustExitCode::
2558 For a custom merge command, specify whether the exit code of
2559 the merge command can be used to determine whether the merge was
2560 successful. If this is not set to true then the merge target file
2561 timestamp is checked and the merge assumed to have been successful
2562 if the file has been updated, otherwise the user is prompted to
2563 indicate the success of the merge.
2565 mergetool.meld.hasOutput::
2566 Older versions of `meld` do not support the `--output` option.
2567 Git will attempt to detect whether `meld` supports `--output`
2568 by inspecting the output of `meld --help`. Configuring
2569 `mergetool.meld.hasOutput` will make Git skip these checks and
2570 use the configured value instead. Setting `mergetool.meld.hasOutput`
2571 to `true` tells Git to unconditionally use the `--output` option,
2572 and `false` avoids using `--output`.
2574 mergetool.keepBackup::
2575 After performing a merge, the original file with conflict markers
2576 can be saved as a file with a `.orig` extension. If this variable
2577 is set to `false` then this file is not preserved. Defaults to
2578 `true` (i.e. keep the backup files).
2580 mergetool.keepTemporaries::
2581 When invoking a custom merge tool, Git uses a set of temporary
2582 files to pass to the tool. If the tool returns an error and this
2583 variable is set to `true`, then these temporary files will be
2584 preserved, otherwise they will be removed after the tool has
2585 exited. Defaults to `false`.
2587 mergetool.writeToTemp::
2588 Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of
2589 conflicting files in the worktree by default. Git will attempt
2590 to use a temporary directory for these files when set `true`.
2591 Defaults to `false`.
2593 mergetool.prompt::
2594 Prompt before each invocation of the merge resolution program.
2596 notes.mergeStrategy::
2597 Which merge strategy to choose by default when resolving notes
2598 conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or
2599 `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES"
2600 section of linkgit:git-notes[1] for more information on each strategy.
2602 notes.<name>.mergeStrategy::
2603 Which merge strategy to choose when doing a notes merge into
2604 refs/notes/<name>. This overrides the more general
2605 "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in
2606 linkgit:git-notes[1] for more information on the available strategies.
2608 notes.displayRef::
2609 The (fully qualified) refname from which to show notes when
2610 showing commit messages. The value of this variable can be set
2611 to a glob, in which case notes from all matching refs will be
2612 shown. You may also specify this configuration variable
2613 several times. A warning will be issued for refs that do not
2614 exist, but a glob that does not match any refs is silently
2615 ignored.
2616 +
2617 This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
2618 environment variable, which must be a colon separated list of refs or
2619 globs.
2620 +
2621 The effective value of "core.notesRef" (possibly overridden by
2622 GIT_NOTES_REF) is also implicitly added to the list of refs to be
2623 displayed.
2625 notes.rewrite.<command>::
2626 When rewriting commits with <command> (currently `amend` or
2627 `rebase`) and this variable is set to `true`, Git
2628 automatically copies your notes from the original to the
2629 rewritten commit. Defaults to `true`, but see
2630 "notes.rewriteRef" below.
2632 notes.rewriteMode::
2633 When copying notes during a rewrite (see the
2634 "notes.rewrite.<command>" option), determines what to do if
2635 the target commit already has a note. Must be one of
2636 `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`.
2637 Defaults to `concatenate`.
2638 +
2639 This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
2640 environment variable.
2642 notes.rewriteRef::
2643 When copying notes during a rewrite, specifies the (fully
2644 qualified) ref whose notes should be copied. The ref may be a
2645 glob, in which case notes in all matching refs will be copied.
2646 You may also specify this configuration several times.
2647 +
2648 Does not have a default value; you must configure this variable to
2649 enable note rewriting. Set it to `refs/notes/commits` to enable
2650 rewriting for the default commit notes.
2651 +
2652 This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
2653 environment variable, which must be a colon separated list of refs or
2654 globs.
2656 pack.window::
2657 The size of the window used by linkgit:git-pack-objects[1] when no
2658 window size is given on the command line. Defaults to 10.
2660 pack.depth::
2661 The maximum delta depth used by linkgit:git-pack-objects[1] when no
2662 maximum depth is given on the command line. Defaults to 50.
2663 Maximum value is 4095.
2665 pack.windowMemory::
2666 The maximum size of memory that is consumed by each thread
2667 in linkgit:git-pack-objects[1] for pack window memory when
2668 no limit is given on the command line. The value can be
2669 suffixed with "k", "m", or "g". When left unconfigured (or
2670 set explicitly to 0), there will be no limit.
2672 pack.compression::
2673 An integer -1..9, indicating the compression level for objects
2674 in a pack file. -1 is the zlib default. 0 means no
2675 compression, and 1..9 are various speed/size tradeoffs, 9 being
2676 slowest. If not set, defaults to core.compression. If that is
2677 not set, defaults to -1, the zlib default, which is "a default
2678 compromise between speed and compression (currently equivalent
2679 to level 6)."
2680 +
2681 Note that changing the compression level will not automatically recompress
2682 all existing objects. You can force recompression by passing the -F option
2683 to linkgit:git-repack[1].
2685 pack.deltaCacheSize::
2686 The maximum memory in bytes used for caching deltas in
2687 linkgit:git-pack-objects[1] before writing them out to a pack.
2688 This cache is used to speed up the writing object phase by not
2689 having to recompute the final delta result once the best match
2690 for all objects is found. Repacking large repositories on machines
2691 which are tight with memory might be badly impacted by this though,
2692 especially if this cache pushes the system into swapping.
2693 A value of 0 means no limit. The smallest size of 1 byte may be
2694 used to virtually disable this cache. Defaults to 256 MiB.
2696 pack.deltaCacheLimit::
2697 The maximum size of a delta, that is cached in
2698 linkgit:git-pack-objects[1]. This cache is used to speed up the
2699 writing object phase by not having to recompute the final delta
2700 result once the best match for all objects is found.
2701 Defaults to 1000. Maximum value is 65535.
2703 pack.threads::
2704 Specifies the number of threads to spawn when searching for best
2705 delta matches. This requires that linkgit:git-pack-objects[1]
2706 be compiled with pthreads otherwise this option is ignored with a
2707 warning. This is meant to reduce packing time on multiprocessor
2708 machines. The required amount of memory for the delta search window
2709 is however multiplied by the number of threads.
2710 Specifying 0 will cause Git to auto-detect the number of CPU's
2711 and set the number of threads accordingly.
2713 pack.indexVersion::
2714 Specify the default pack index version. Valid values are 1 for
2715 legacy pack index used by Git versions prior to 1.5.2, and 2 for
2716 the new pack index with capabilities for packs larger than 4 GB
2717 as well as proper protection against the repacking of corrupted
2718 packs. Version 2 is the default. Note that version 2 is enforced
2719 and this config option ignored whenever the corresponding pack is
2720 larger than 2 GB.
2721 +
2722 If you have an old Git that does not understand the version 2 `*.idx` file,
2723 cloning or fetching over a non native protocol (e.g. "http")
2724 that will copy both `*.pack` file and corresponding `*.idx` file from the
2725 other side may give you a repository that cannot be accessed with your
2726 older version of Git. If the `*.pack` file is smaller than 2 GB, however,
2727 you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
2728 the `*.idx` file.
2730 pack.packSizeLimit::
2731 The maximum size of a pack. This setting only affects
2732 packing to a file when repacking, i.e. the git:// protocol
2733 is unaffected. It can be overridden by the `--max-pack-size`
2734 option of linkgit:git-repack[1]. Reaching this limit results
2735 in the creation of multiple packfiles; which in turn prevents
2736 bitmaps from being created.
2737 The minimum size allowed is limited to 1 MiB.
2738 The default is unlimited.
2739 Common unit suffixes of 'k', 'm', or 'g' are
2740 supported.
2742 pack.useBitmaps::
2743 When true, git will use pack bitmaps (if available) when packing
2744 to stdout (e.g., during the server side of a fetch). Defaults to
2745 true. You should not generally need to turn this off unless
2746 you are debugging pack bitmaps.
2748 pack.writeBitmaps (deprecated)::
2749 This is a deprecated synonym for `repack.writeBitmaps`.
2751 pack.writeBitmapHashCache::
2752 When true, git will include a "hash cache" section in the bitmap
2753 index (if one is written). This cache can be used to feed git's
2754 delta heuristics, potentially leading to better deltas between
2755 bitmapped and non-bitmapped objects (e.g., when serving a fetch
2756 between an older, bitmapped pack and objects that have been
2757 pushed since the last gc). The downside is that it consumes 4
2758 bytes per object of disk space, and that JGit's bitmap
2759 implementation does not understand it, causing it to complain if
2760 Git and JGit are used on the same repository. Defaults to false.
2762 pager.<cmd>::
2763 If the value is boolean, turns on or off pagination of the
2764 output of a particular Git subcommand when writing to a tty.
2765 Otherwise, turns on pagination for the subcommand using the
2766 pager specified by the value of `pager.<cmd>`. If `--paginate`
2767 or `--no-pager` is specified on the command line, it takes
2768 precedence over this option. To disable pagination for all
2769 commands, set `core.pager` or `GIT_PAGER` to `cat`.
2771 pretty.<name>::
2772 Alias for a --pretty= format string, as specified in
2773 linkgit:git-log[1]. Any aliases defined here can be used just
2774 as the built-in pretty formats could. For example,
2775 running `git config pretty.changelog "format:* %H %s"`
2776 would cause the invocation `git log --pretty=changelog`
2777 to be equivalent to running `git log "--pretty=format:* %H %s"`.
2778 Note that an alias with the same name as a built-in format
2779 will be silently ignored.
2781 protocol.allow::
2782 If set, provide a user defined default policy for all protocols which
2783 don't explicitly have a policy (`protocol.<name>.allow`). By default,
2784 if unset, known-safe protocols (http, https, git, ssh, file) have a
2785 default policy of `always`, known-dangerous protocols (ext) have a
2786 default policy of `never`, and all other protocols have a default
2787 policy of `user`. Supported policies:
2788 +
2789 --
2791 * `always` - protocol is always able to be used.
2793 * `never` - protocol is never able to be used.
2795 * `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
2796 either unset or has a value of 1. This policy should be used when you want a
2797 protocol to be directly usable by the user but don't want it used by commands which
2798 execute clone/fetch/push commands without user input, e.g. recursive
2799 submodule initialization.
2801 --
2803 protocol.<name>.allow::
2804 Set a policy to be used by protocol `<name>` with clone/fetch/push
2805 commands. See `protocol.allow` above for the available policies.
2806 +
2807 The protocol names currently used by git are:
2808 +
2809 --
2810 - `file`: any local file-based path (including `file://` URLs,
2811 or local paths)
2813 - `git`: the anonymous git protocol over a direct TCP
2814 connection (or proxy, if configured)
2816 - `ssh`: git over ssh (including `host:path` syntax,
2817 `ssh://`, etc).
2819 - `http`: git over http, both "smart http" and "dumb http".
2820 Note that this does _not_ include `https`; if you want to configure
2821 both, you must do so individually.
2823 - any external helpers are named by their protocol (e.g., use
2824 `hg` to allow the `git-remote-hg` helper)
2825 --
2827 protocol.version::
2828 Experimental. If set, clients will attempt to communicate with a
2829 server using the specified protocol version. If unset, no
2830 attempt will be made by the client to communicate using a
2831 particular protocol version, this results in protocol version 0
2832 being used.
2833 Supported versions:
2834 +
2835 --
2837 * `0` - the original wire protocol.
2839 * `1` - the original wire protocol with the addition of a version string
2840 in the initial response from the server.
2842 --
2844 pull.ff::
2845 By default, Git does not create an extra merge commit when merging
2846 a commit that is a descendant of the current commit. Instead, the
2847 tip of the current branch is fast-forwarded. When set to `false`,
2848 this variable tells Git to create an extra merge commit in such
2849 a case (equivalent to giving the `--no-ff` option from the command
2850 line). When set to `only`, only such fast-forward merges are
2851 allowed (equivalent to giving the `--ff-only` option from the
2852 command line). This setting overrides `merge.ff` when pulling.
2854 pull.rebase::
2855 When true, rebase branches on top of the fetched branch, instead
2856 of merging the default branch from the default remote when "git
2857 pull" is run. See "branch.<name>.rebase" for setting this on a
2858 per-branch basis.
2859 +
2860 When `merges`, pass the `--rebase-merges` option to 'git rebase'
2861 so that the local merge commits are included in the rebase (see
2862 linkgit:git-rebase[1] for details).
2863 +
2864 When preserve, also pass `--preserve-merges` along to 'git rebase'
2865 so that locally committed merge commits will not be flattened
2866 by running 'git pull'.
2867 +
2868 When the value is `interactive`, the rebase is run in interactive mode.
2869 +
2870 *NOTE*: this is a possibly dangerous operation; do *not* use
2871 it unless you understand the implications (see linkgit:git-rebase[1]
2872 for details).
2874 pull.octopus::
2875 The default merge strategy to use when pulling multiple branches
2876 at once.
2878 pull.twohead::
2879 The default merge strategy to use when pulling a single branch.
2881 push.default::
2882 Defines the action `git push` should take if no refspec is
2883 explicitly given. Different values are well-suited for
2884 specific workflows; for instance, in a purely central workflow
2885 (i.e. the fetch source is equal to the push destination),
2886 `upstream` is probably what you want. Possible values are:
2887 +
2888 --
2890 * `nothing` - do not push anything (error out) unless a refspec is
2891 explicitly given. This is primarily meant for people who want to
2892 avoid mistakes by always being explicit.
2894 * `current` - push the current branch to update a branch with the same
2895 name on the receiving end. Works in both central and non-central
2896 workflows.
2898 * `upstream` - push the current branch back to the branch whose
2899 changes are usually integrated into the current branch (which is
2900 called `@{upstream}`). This mode only makes sense if you are
2901 pushing to the same repository you would normally pull from
2902 (i.e. central workflow).
2904 * `tracking` - This is a deprecated synonym for `upstream`.
2906 * `simple` - in centralized workflow, work like `upstream` with an
2907 added safety to refuse to push if the upstream branch's name is
2908 different from the local one.
2909 +
2910 When pushing to a remote that is different from the remote you normally
2911 pull from, work as `current`. This is the safest option and is suited
2912 for beginners.
2913 +
2914 This mode has become the default in Git 2.0.
2916 * `matching` - push all branches having the same name on both ends.
2917 This makes the repository you are pushing to remember the set of
2918 branches that will be pushed out (e.g. if you always push 'maint'
2919 and 'master' there and no other branches, the repository you push
2920 to will have these two branches, and your local 'maint' and
2921 'master' will be pushed there).
2922 +
2923 To use this mode effectively, you have to make sure _all_ the
2924 branches you would push out are ready to be pushed out before
2925 running 'git push', as the whole point of this mode is to allow you
2926 to push all of the branches in one go. If you usually finish work
2927 on only one branch and push out the result, while other branches are
2928 unfinished, this mode is not for you. Also this mode is not
2929 suitable for pushing into a shared central repository, as other
2930 people may add new branches there, or update the tip of existing
2931 branches outside your control.
2932 +
2933 This used to be the default, but not since Git 2.0 (`simple` is the
2934 new default).
2936 --
2938 push.followTags::
2939 If set to true enable `--follow-tags` option by default. You
2940 may override this configuration at time of push by specifying
2941 `--no-follow-tags`.
2943 push.gpgSign::
2944 May be set to a boolean value, or the string 'if-asked'. A true
2945 value causes all pushes to be GPG signed, as if `--signed` is
2946 passed to linkgit:git-push[1]. The string 'if-asked' causes
2947 pushes to be signed if the server supports it, as if
2948 `--signed=if-asked` is passed to 'git push'. A false value may
2949 override a value from a lower-priority config file. An explicit
2950 command-line flag always overrides this config option.
2952 push.pushOption::
2953 When no `--push-option=<option>` argument is given from the
2954 command line, `git push` behaves as if each <value> of
2955 this variable is given as `--push-option=<value>`.
2956 +
2957 This is a multi-valued variable, and an empty value can be used in a
2958 higher priority configuration file (e.g. `.git/config` in a
2959 repository) to clear the values inherited from a lower priority
2960 configuration files (e.g. `$HOME/.gitconfig`).
2961 +
2962 --
2964 Example:
2966 /etc/gitconfig
2967 push.pushoption = a
2968 push.pushoption = b
2970 ~/.gitconfig
2971 push.pushoption = c
2973 repo/.git/config
2974 push.pushoption =
2975 push.pushoption = b
2977 This will result in only b (a and c are cleared).
2979 --
2981 push.recurseSubmodules::
2982 Make sure all submodule commits used by the revisions to be pushed
2983 are available on a remote-tracking branch. If the value is 'check'
2984 then Git will verify that all submodule commits that changed in the
2985 revisions to be pushed are available on at least one remote of the
2986 submodule. If any commits are missing, the push will be aborted and
2987 exit with non-zero status. If the value is 'on-demand' then all
2988 submodules that changed in the revisions to be pushed will be
2989 pushed. If on-demand was not able to push all necessary revisions
2990 it will also be aborted and exit with non-zero status. If the value
2991 is 'no' then default behavior of ignoring submodules when pushing
2992 is retained. You may override this configuration at time of push by
2993 specifying '--recurse-submodules=check|on-demand|no'.
2995 include::rebase-config.txt[]
2997 receive.advertiseAtomic::
2998 By default, git-receive-pack will advertise the atomic push
2999 capability to its clients. If you don't want to advertise this
3000 capability, set this variable to false.
3002 receive.advertisePushOptions::
3003 When set to true, git-receive-pack will advertise the push options
3004 capability to its clients. False by default.
3006 receive.autogc::
3007 By default, git-receive-pack will run "git-gc --auto" after
3008 receiving data from git-push and updating refs. You can stop
3009 it by setting this variable to false.
3011 receive.certNonceSeed::
3012 By setting this variable to a string, `git receive-pack`
3013 will accept a `git push --signed` and verifies it by using
3014 a "nonce" protected by HMAC using this string as a secret
3015 key.
3017 receive.certNonceSlop::
3018 When a `git push --signed` sent a push certificate with a
3019 "nonce" that was issued by a receive-pack serving the same
3020 repository within this many seconds, export the "nonce"
3021 found in the certificate to `GIT_PUSH_CERT_NONCE` to the
3022 hooks (instead of what the receive-pack asked the sending
3023 side to include). This may allow writing checks in
3024 `pre-receive` and `post-receive` a bit easier. Instead of
3025 checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
3026 that records by how many seconds the nonce is stale to
3027 decide if they want to accept the certificate, they only
3028 can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
3030 receive.fsckObjects::
3031 If it is set to true, git-receive-pack will check all received
3032 objects. See `transfer.fsckObjects` for what's checked.
3033 Defaults to false. If not set, the value of
3034 `transfer.fsckObjects` is used instead.
3036 receive.fsck.<msg-id>::
3037 Acts like `fsck.<msg-id>`, but is used by
3038 linkgit:git-receive-pack[1] instead of
3039 linkgit:git-fsck[1]. See the `fsck.<msg-id>` documentation for
3040 details.
3042 receive.fsck.skipList::
3043 Acts like `fsck.skipList`, but is used by
3044 linkgit:git-receive-pack[1] instead of
3045 linkgit:git-fsck[1]. See the `fsck.skipList` documentation for
3046 details.
3048 receive.keepAlive::
3049 After receiving the pack from the client, `receive-pack` may
3050 produce no output (if `--quiet` was specified) while processing
3051 the pack, causing some networks to drop the TCP connection.
3052 With this option set, if `receive-pack` does not transmit
3053 any data in this phase for `receive.keepAlive` seconds, it will
3054 send a short keepalive packet. The default is 5 seconds; set
3055 to 0 to disable keepalives entirely.
3057 receive.unpackLimit::
3058 If the number of objects received in a push is below this
3059 limit then the objects will be unpacked into loose object
3060 files. However if the number of received objects equals or
3061 exceeds this limit then the received pack will be stored as
3062 a pack, after adding any missing delta bases. Storing the
3063 pack from a push can make the push operation complete faster,
3064 especially on slow filesystems. If not set, the value of
3065 `transfer.unpackLimit` is used instead.
3067 receive.maxInputSize::
3068 If the size of the incoming pack stream is larger than this
3069 limit, then git-receive-pack will error out, instead of
3070 accepting the pack file. If not set or set to 0, then the size
3071 is unlimited.
3073 receive.denyDeletes::
3074 If set to true, git-receive-pack will deny a ref update that deletes
3075 the ref. Use this to prevent such a ref deletion via a push.
3077 receive.denyDeleteCurrent::
3078 If set to true, git-receive-pack will deny a ref update that
3079 deletes the currently checked out branch of a non-bare repository.
3081 receive.denyCurrentBranch::
3082 If set to true or "refuse", git-receive-pack will deny a ref update
3083 to the currently checked out branch of a non-bare repository.
3084 Such a push is potentially dangerous because it brings the HEAD
3085 out of sync with the index and working tree. If set to "warn",
3086 print a warning of such a push to stderr, but allow the push to
3087 proceed. If set to false or "ignore", allow such pushes with no
3088 message. Defaults to "refuse".
3089 +
3090 Another option is "updateInstead" which will update the working
3091 tree if pushing into the current branch. This option is
3092 intended for synchronizing working directories when one side is not easily
3093 accessible via interactive ssh (e.g. a live web site, hence the requirement
3094 that the working directory be clean). This mode also comes in handy when
3095 developing inside a VM to test and fix code on different Operating Systems.
3096 +
3097 By default, "updateInstead" will refuse the push if the working tree or
3098 the index have any difference from the HEAD, but the `push-to-checkout`
3099 hook can be used to customize this. See linkgit:githooks[5].
3101 receive.denyNonFastForwards::
3102 If set to true, git-receive-pack will deny a ref update which is
3103 not a fast-forward. Use this to prevent such an update via a push,
3104 even if that push is forced. This configuration variable is
3105 set when initializing a shared repository.
3107 receive.hideRefs::
3108 This variable is the same as `transfer.hideRefs`, but applies
3109 only to `receive-pack` (and so affects pushes, but not fetches).
3110 An attempt to update or delete a hidden ref by `git push` is
3111 rejected.
3113 receive.updateServerInfo::
3114 If set to true, git-receive-pack will run git-update-server-info
3115 after receiving data from git-push and updating refs.
3117 receive.shallowUpdate::
3118 If set to true, .git/shallow can be updated when new refs
3119 require new shallow roots. Otherwise those refs are rejected.
3121 remote.pushDefault::
3122 The remote to push to by default. Overrides
3123 `branch.<name>.remote` for all branches, and is overridden by
3124 `branch.<name>.pushRemote` for specific branches.
3126 remote.<name>.url::
3127 The URL of a remote repository. See linkgit:git-fetch[1] or
3128 linkgit:git-push[1].
3130 remote.<name>.pushurl::
3131 The push URL of a remote repository. See linkgit:git-push[1].
3133 remote.<name>.proxy::
3134 For remotes that require curl (http, https and ftp), the URL to
3135 the proxy to use for that remote. Set to the empty string to
3136 disable proxying for that remote.
3138 remote.<name>.proxyAuthMethod::
3139 For remotes that require curl (http, https and ftp), the method to use for
3140 authenticating against the proxy in use (probably set in
3141 `remote.<name>.proxy`). See `http.proxyAuthMethod`.
3143 remote.<name>.fetch::
3144 The default set of "refspec" for linkgit:git-fetch[1]. See
3145 linkgit:git-fetch[1].
3147 remote.<name>.push::
3148 The default set of "refspec" for linkgit:git-push[1]. See
3149 linkgit:git-push[1].
3151 remote.<name>.mirror::
3152 If true, pushing to this remote will automatically behave
3153 as if the `--mirror` option was given on the command line.
3155 remote.<name>.skipDefaultUpdate::
3156 If true, this remote will be skipped by default when updating
3157 using linkgit:git-fetch[1] or the `update` subcommand of
3158 linkgit:git-remote[1].
3160 remote.<name>.skipFetchAll::
3161 If true, this remote will be skipped by default when updating
3162 using linkgit:git-fetch[1] or the `update` subcommand of
3163 linkgit:git-remote[1].
3165 remote.<name>.receivepack::
3166 The default program to execute on the remote side when pushing. See
3167 option --receive-pack of linkgit:git-push[1].
3169 remote.<name>.uploadpack::
3170 The default program to execute on the remote side when fetching. See
3171 option --upload-pack of linkgit:git-fetch-pack[1].
3173 remote.<name>.tagOpt::
3174 Setting this value to --no-tags disables automatic tag following when
3175 fetching from remote <name>. Setting it to --tags will fetch every
3176 tag from remote <name>, even if they are not reachable from remote
3177 branch heads. Passing these flags directly to linkgit:git-fetch[1] can
3178 override this setting. See options --tags and --no-tags of
3179 linkgit:git-fetch[1].
3181 remote.<name>.vcs::
3182 Setting this to a value <vcs> will cause Git to interact with
3183 the remote with the git-remote-<vcs> helper.
3185 remote.<name>.prune::
3186 When set to true, fetching from this remote by default will also
3187 remove any remote-tracking references that no longer exist on the
3188 remote (as if the `--prune` option was given on the command line).
3189 Overrides `fetch.prune` settings, if any.
3191 remote.<name>.pruneTags::
3192 When set to true, fetching from this remote by default will also
3193 remove any local tags that no longer exist on the remote if pruning
3194 is activated in general via `remote.<name>.prune`, `fetch.prune` or
3195 `--prune`. Overrides `fetch.pruneTags` settings, if any.
3196 +
3197 See also `remote.<name>.prune` and the PRUNING section of
3198 linkgit:git-fetch[1].
3200 remotes.<group>::
3201 The list of remotes which are fetched by "git remote update
3202 <group>". See linkgit:git-remote[1].
3204 repack.useDeltaBaseOffset::
3205 By default, linkgit:git-repack[1] creates packs that use
3206 delta-base offset. If you need to share your repository with
3207 Git older than version 1.4.4, either directly or via a dumb
3208 protocol such as http, then you need to set this option to
3209 "false" and repack. Access from old Git versions over the
3210 native protocol are unaffected by this option.
3212 repack.packKeptObjects::
3213 If set to true, makes `git repack` act as if
3214 `--pack-kept-objects` was passed. See linkgit:git-repack[1] for
3215 details. Defaults to `false` normally, but `true` if a bitmap
3216 index is being written (either via `--write-bitmap-index` or
3217 `repack.writeBitmaps`).
3219 repack.writeBitmaps::
3220 When true, git will write a bitmap index when packing all
3221 objects to disk (e.g., when `git repack -a` is run). This
3222 index can speed up the "counting objects" phase of subsequent
3223 packs created for clones and fetches, at the cost of some disk
3224 space and extra time spent on the initial repack. This has
3225 no effect if multiple packfiles are created.
3226 Defaults to false.
3228 rerere.autoUpdate::
3229 When set to true, `git-rerere` updates the index with the
3230 resulting contents after it cleanly resolves conflicts using
3231 previously recorded resolution. Defaults to false.
3233 rerere.enabled::
3234 Activate recording of resolved conflicts, so that identical
3235 conflict hunks can be resolved automatically, should they be
3236 encountered again. By default, linkgit:git-rerere[1] is
3237 enabled if there is an `rr-cache` directory under the
3238 `$GIT_DIR`, e.g. if "rerere" was previously used in the
3239 repository.
3241 sendemail.identity::
3242 A configuration identity. When given, causes values in the
3243 'sendemail.<identity>' subsection to take precedence over
3244 values in the 'sendemail' section. The default identity is
3245 the value of `sendemail.identity`.
3247 sendemail.smtpEncryption::
3248 See linkgit:git-send-email[1] for description. Note that this
3249 setting is not subject to the 'identity' mechanism.
3251 sendemail.smtpssl (deprecated)::
3252 Deprecated alias for 'sendemail.smtpEncryption = ssl'.
3254 sendemail.smtpsslcertpath::
3255 Path to ca-certificates (either a directory or a single file).
3256 Set it to an empty string to disable certificate verification.
3258 sendemail.<identity>.*::
3259 Identity-specific versions of the 'sendemail.*' parameters
3260 found below, taking precedence over those when this
3261 identity is selected, through either the command-line or
3262 `sendemail.identity`.
3264 sendemail.aliasesFile::
3265 sendemail.aliasFileType::
3266 sendemail.annotate::
3267 sendemail.bcc::
3268 sendemail.cc::
3269 sendemail.ccCmd::
3270 sendemail.chainReplyTo::
3271 sendemail.confirm::
3272 sendemail.envelopeSender::
3273 sendemail.from::
3274 sendemail.multiEdit::
3275 sendemail.signedoffbycc::
3276 sendemail.smtpPass::
3277 sendemail.suppresscc::
3278 sendemail.suppressFrom::
3279 sendemail.to::
3280 sendemail.tocmd::
3281 sendemail.smtpDomain::
3282 sendemail.smtpServer::
3283 sendemail.smtpServerPort::
3284 sendemail.smtpServerOption::
3285 sendemail.smtpUser::
3286 sendemail.thread::
3287 sendemail.transferEncoding::
3288 sendemail.validate::
3289 sendemail.xmailer::
3290 See linkgit:git-send-email[1] for description.
3292 sendemail.signedoffcc (deprecated)::
3293 Deprecated alias for `sendemail.signedoffbycc`.
3295 sendemail.smtpBatchSize::
3296 Number of messages to be sent per connection, after that a relogin
3297 will happen. If the value is 0 or undefined, send all messages in
3298 one connection.
3299 See also the `--batch-size` option of linkgit:git-send-email[1].
3301 sendemail.smtpReloginDelay::
3302 Seconds wait before reconnecting to smtp server.
3303 See also the `--relogin-delay` option of linkgit:git-send-email[1].
3305 showbranch.default::
3306 The default set of branches for linkgit:git-show-branch[1].
3307 See linkgit:git-show-branch[1].
3309 splitIndex.maxPercentChange::
3310 When the split index feature is used, this specifies the
3311 percent of entries the split index can contain compared to the
3312 total number of entries in both the split index and the shared
3313 index before a new shared index is written.
3314 The value should be between 0 and 100. If the value is 0 then
3315 a new shared index is always written, if it is 100 a new
3316 shared index is never written.
3317 By default the value is 20, so a new shared index is written
3318 if the number of entries in the split index would be greater
3319 than 20 percent of the total number of entries.
3320 See linkgit:git-update-index[1].
3322 splitIndex.sharedIndexExpire::
3323 When the split index feature is used, shared index files that
3324 were not modified since the time this variable specifies will
3325 be removed when a new shared index file is created. The value
3326 "now" expires all entries immediately, and "never" suppresses
3327 expiration altogether.
3328 The default value is "2.weeks.ago".
3329 Note that a shared index file is considered modified (for the
3330 purpose of expiration) each time a new split-index file is
3331 either created based on it or read from it.
3332 See linkgit:git-update-index[1].
3334 status.relativePaths::
3335 By default, linkgit:git-status[1] shows paths relative to the
3336 current directory. Setting this variable to `false` shows paths
3337 relative to the repository root (this was the default for Git
3338 prior to v1.5.4).
3340 status.short::
3341 Set to true to enable --short by default in linkgit:git-status[1].
3342 The option --no-short takes precedence over this variable.
3344 status.branch::
3345 Set to true to enable --branch by default in linkgit:git-status[1].
3346 The option --no-branch takes precedence over this variable.
3348 status.displayCommentPrefix::
3349 If set to true, linkgit:git-status[1] will insert a comment
3350 prefix before each output line (starting with
3351 `core.commentChar`, i.e. `#` by default). This was the
3352 behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
3353 Defaults to false.
3355 status.renameLimit::
3356 The number of files to consider when performing rename detection
3357 in linkgit:git-status[1] and linkgit:git-commit[1]. Defaults to
3358 the value of diff.renameLimit.
3360 status.renames::
3361 Whether and how Git detects renames in linkgit:git-status[1] and
3362 linkgit:git-commit[1] . If set to "false", rename detection is
3363 disabled. If set to "true", basic rename detection is enabled.
3364 If set to "copies" or "copy", Git will detect copies, as well.
3365 Defaults to the value of diff.renames.
3367 status.showStash::
3368 If set to true, linkgit:git-status[1] will display the number of
3369 entries currently stashed away.
3370 Defaults to false.
3372 status.showUntrackedFiles::
3373 By default, linkgit:git-status[1] and linkgit:git-commit[1] show
3374 files which are not currently tracked by Git. Directories which
3375 contain only untracked files, are shown with the directory name
3376 only. Showing untracked files means that Git needs to lstat() all
3377 the files in the whole repository, which might be slow on some
3378 systems. So, this variable controls how the commands displays
3379 the untracked files. Possible values are:
3380 +
3381 --
3382 * `no` - Show no untracked files.
3383 * `normal` - Show untracked files and directories.
3384 * `all` - Show also individual files in untracked directories.
3385 --
3386 +
3387 If this variable is not specified, it defaults to 'normal'.
3388 This variable can be overridden with the -u|--untracked-files option
3389 of linkgit:git-status[1] and linkgit:git-commit[1].
3391 status.submoduleSummary::
3392 Defaults to false.
3393 If this is set to a non zero number or true (identical to -1 or an
3394 unlimited number), the submodule summary will be enabled and a
3395 summary of commits for modified submodules will be shown (see
3396 --summary-limit option of linkgit:git-submodule[1]). Please note
3397 that the summary output command will be suppressed for all
3398 submodules when `diff.ignoreSubmodules` is set to 'all' or only
3399 for those submodules where `submodule.<name>.ignore=all`. The only
3400 exception to that rule is that status and commit will show staged
3401 submodule changes. To
3402 also view the summary for ignored submodules you can either use
3403 the --ignore-submodules=dirty command-line option or the 'git
3404 submodule summary' command, which shows a similar output but does
3405 not honor these settings.
3407 stash.showPatch::
3408 If this is set to true, the `git stash show` command without an
3409 option will show the stash entry in patch form. Defaults to false.
3410 See description of 'show' command in linkgit:git-stash[1].
3412 stash.showStat::
3413 If this is set to true, the `git stash show` command without an
3414 option will show diffstat of the stash entry. Defaults to true.
3415 See description of 'show' command in linkgit:git-stash[1].
3417 submodule.<name>.url::
3418 The URL for a submodule. This variable is copied from the .gitmodules
3419 file to the git config via 'git submodule init'. The user can change
3420 the configured URL before obtaining the submodule via 'git submodule
3421 update'. If neither submodule.<name>.active or submodule.active are
3422 set, the presence of this variable is used as a fallback to indicate
3423 whether the submodule is of interest to git commands.
3424 See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
3426 submodule.<name>.update::
3427 The method by which a submodule is updated by 'git submodule update',
3428 which is the only affected command, others such as
3429 'git checkout --recurse-submodules' are unaffected. It exists for
3430 historical reasons, when 'git submodule' was the only command to
3431 interact with submodules; settings like `submodule.active`
3432 and `pull.rebase` are more specific. It is populated by
3433 `git submodule init` from the linkgit:gitmodules[5] file.
3434 See description of 'update' command in linkgit:git-submodule[1].
3436 submodule.<name>.branch::
3437 The remote branch name for a submodule, used by `git submodule
3438 update --remote`. Set this option to override the value found in
3439 the `.gitmodules` file. See linkgit:git-submodule[1] and
3440 linkgit:gitmodules[5] for details.
3442 submodule.<name>.fetchRecurseSubmodules::
3443 This option can be used to control recursive fetching of this
3444 submodule. It can be overridden by using the --[no-]recurse-submodules
3445 command-line option to "git fetch" and "git pull".
3446 This setting will override that from in the linkgit:gitmodules[5]
3447 file.
3449 submodule.<name>.ignore::
3450 Defines under what circumstances "git status" and the diff family show
3451 a submodule as modified. When set to "all", it will never be considered
3452 modified (but it will nonetheless show up in the output of status and
3453 commit when it has been staged), "dirty" will ignore all changes
3454 to the submodules work tree and
3455 takes only differences between the HEAD of the submodule and the commit
3456 recorded in the superproject into account. "untracked" will additionally
3457 let submodules with modified tracked files in their work tree show up.
3458 Using "none" (the default when this option is not set) also shows
3459 submodules that have untracked files in their work tree as changed.
3460 This setting overrides any setting made in .gitmodules for this submodule,
3461 both settings can be overridden on the command line by using the
3462 "--ignore-submodules" option. The 'git submodule' commands are not
3463 affected by this setting.
3465 submodule.<name>.active::
3466 Boolean value indicating if the submodule is of interest to git
3467 commands. This config option takes precedence over the
3468 submodule.active config option. See linkgit:gitsubmodules[7] for
3469 details.
3471 submodule.active::
3472 A repeated field which contains a pathspec used to match against a
3473 submodule's path to determine if the submodule is of interest to git
3474 commands. See linkgit:gitsubmodules[7] for details.
3476 submodule.recurse::
3477 Specifies if commands recurse into submodules by default. This
3478 applies to all commands that have a `--recurse-submodules` option,
3479 except `clone`.
3480 Defaults to false.
3482 submodule.fetchJobs::
3483 Specifies how many submodules are fetched/cloned at the same time.
3484 A positive integer allows up to that number of submodules fetched
3485 in parallel. A value of 0 will give some reasonable default.
3486 If unset, it defaults to 1.
3488 submodule.alternateLocation::
3489 Specifies how the submodules obtain alternates when submodules are
3490 cloned. Possible values are `no`, `superproject`.
3491 By default `no` is assumed, which doesn't add references. When the
3492 value is set to `superproject` the submodule to be cloned computes
3493 its alternates location relative to the superprojects alternate.
3495 submodule.alternateErrorStrategy::
3496 Specifies how to treat errors with the alternates for a submodule
3497 as computed via `submodule.alternateLocation`. Possible values are
3498 `ignore`, `info`, `die`. Default is `die`.
3500 tag.forceSignAnnotated::
3501 A boolean to specify whether annotated tags created should be GPG signed.
3502 If `--annotate` is specified on the command line, it takes
3503 precedence over this option.
3505 tag.sort::
3506 This variable controls the sort ordering of tags when displayed by
3507 linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the
3508 value of this variable will be used as the default.
3510 tar.umask::
3511 This variable can be used to restrict the permission bits of
3512 tar archive entries. The default is 0002, which turns off the
3513 world write bit. The special value "user" indicates that the
3514 archiving user's umask will be used instead. See umask(2) and
3515 linkgit:git-archive[1].
3517 transfer.fsckObjects::
3518 When `fetch.fsckObjects` or `receive.fsckObjects` are
3519 not set, the value of this variable is used instead.
3520 Defaults to false.
3521 +
3522 When set, the fetch or receive will abort in the case of a malformed
3523 object or a link to a nonexistent object. In addition, various other
3524 issues are checked for, including legacy issues (see `fsck.<msg-id>`),
3525 and potential security issues like the existence of a `.GIT` directory
3526 or a malicious `.gitmodules` file (see the release notes for v2.2.1
3527 and v2.17.1 for details). Other sanity and security checks may be
3528 added in future releases.
3529 +
3530 On the receiving side, failing fsckObjects will make those objects
3531 unreachable, see "QUARANTINE ENVIRONMENT" in
3532 linkgit:git-receive-pack[1]. On the fetch side, malformed objects will
3533 instead be left unreferenced in the repository.
3534 +
3535 Due to the non-quarantine nature of the `fetch.fsckObjects`
3536 implementation it can not be relied upon to leave the object store
3537 clean like `receive.fsckObjects` can.
3538 +
3539 As objects are unpacked they're written to the object store, so there
3540 can be cases where malicious objects get introduced even though the
3541 "fetch" failed, only to have a subsequent "fetch" succeed because only
3542 new incoming objects are checked, not those that have already been
3543 written to the object store. That difference in behavior should not be
3544 relied upon. In the future, such objects may be quarantined for
3545 "fetch" as well.
3546 +
3547 For now, the paranoid need to find some way to emulate the quarantine
3548 environment if they'd like the same protection as "push". E.g. in the
3549 case of an internal mirror do the mirroring in two steps, one to fetch
3550 the untrusted objects, and then do a second "push" (which will use the
3551 quarantine) to another internal repo, and have internal clients
3552 consume this pushed-to repository, or embargo internal fetches and
3553 only allow them once a full "fsck" has run (and no new fetches have
3554 happened in the meantime).
3556 transfer.hideRefs::
3557 String(s) `receive-pack` and `upload-pack` use to decide which
3558 refs to omit from their initial advertisements. Use more than
3559 one definition to specify multiple prefix strings. A ref that is
3560 under the hierarchies listed in the value of this variable is
3561 excluded, and is hidden when responding to `git push` or `git
3562 fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for
3563 program-specific versions of this config.
3564 +
3565 You may also include a `!` in front of the ref name to negate the entry,
3566 explicitly exposing it, even if an earlier entry marked it as hidden.
3567 If you have multiple hideRefs values, later entries override earlier ones
3568 (and entries in more-specific config files override less-specific ones).
3569 +
3570 If a namespace is in use, the namespace prefix is stripped from each
3571 reference before it is matched against `transfer.hiderefs` patterns.
3572 For example, if `refs/heads/master` is specified in `transfer.hideRefs` and
3573 the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master`
3574 is omitted from the advertisements but `refs/heads/master` and
3575 `refs/namespaces/bar/refs/heads/master` are still advertised as so-called
3576 "have" lines. In order to match refs before stripping, add a `^` in front of
3577 the ref name. If you combine `!` and `^`, `!` must be specified first.
3578 +
3579 Even if you hide refs, a client may still be able to steal the target
3580 objects via the techniques described in the "SECURITY" section of the
3581 linkgit:gitnamespaces[7] man page; it's best to keep private data in a
3582 separate repository.
3584 transfer.unpackLimit::
3585 When `fetch.unpackLimit` or `receive.unpackLimit` are
3586 not set, the value of this variable is used instead.
3587 The default value is 100.
3589 uploadarchive.allowUnreachable::
3590 If true, allow clients to use `git archive --remote` to request
3591 any tree, whether reachable from the ref tips or not. See the
3592 discussion in the "SECURITY" section of
3593 linkgit:git-upload-archive[1] for more details. Defaults to
3594 `false`.
3596 uploadpack.hideRefs::
3597 This variable is the same as `transfer.hideRefs`, but applies
3598 only to `upload-pack` (and so affects only fetches, not pushes).
3599 An attempt to fetch a hidden ref by `git fetch` will fail. See
3600 also `uploadpack.allowTipSHA1InWant`.
3602 uploadpack.allowTipSHA1InWant::
3603 When `uploadpack.hideRefs` is in effect, allow `upload-pack`
3604 to accept a fetch request that asks for an object at the tip
3605 of a hidden ref (by default, such a request is rejected).
3606 See also `uploadpack.hideRefs`. Even if this is false, a client
3607 may be able to steal objects via the techniques described in the
3608 "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's
3609 best to keep private data in a separate repository.
3611 uploadpack.allowReachableSHA1InWant::
3612 Allow `upload-pack` to accept a fetch request that asks for an
3613 object that is reachable from any ref tip. However, note that
3614 calculating object reachability is computationally expensive.
3615 Defaults to `false`. Even if this is false, a client may be able
3616 to steal objects via the techniques described in the "SECURITY"
3617 section of the linkgit:gitnamespaces[7] man page; it's best to
3618 keep private data in a separate repository.
3620 uploadpack.allowAnySHA1InWant::
3621 Allow `upload-pack` to accept a fetch request that asks for any
3622 object at all.
3623 Defaults to `false`.
3625 uploadpack.keepAlive::
3626 When `upload-pack` has started `pack-objects`, there may be a
3627 quiet period while `pack-objects` prepares the pack. Normally
3628 it would output progress information, but if `--quiet` was used
3629 for the fetch, `pack-objects` will output nothing at all until
3630 the pack data begins. Some clients and networks may consider
3631 the server to be hung and give up. Setting this option instructs
3632 `upload-pack` to send an empty keepalive packet every
3633 `uploadpack.keepAlive` seconds. Setting this option to 0
3634 disables keepalive packets entirely. The default is 5 seconds.
3636 uploadpack.packObjectsHook::
3637 If this option is set, when `upload-pack` would run
3638 `git pack-objects` to create a packfile for a client, it will
3639 run this shell command instead. The `pack-objects` command and
3640 arguments it _would_ have run (including the `git pack-objects`
3641 at the beginning) are appended to the shell command. The stdin
3642 and stdout of the hook are treated as if `pack-objects` itself
3643 was run. I.e., `upload-pack` will feed input intended for
3644 `pack-objects` to the hook, and expects a completed packfile on
3645 stdout.
3647 uploadpack.allowFilter::
3648 If this option is set, `upload-pack` will support partial
3649 clone and partial fetch object filtering.
3650 +
3651 Note that this configuration variable is ignored if it is seen in the
3652 repository-level config (this is a safety measure against fetching from
3653 untrusted repositories).
3655 uploadpack.allowRefInWant::
3656 If this option is set, `upload-pack` will support the `ref-in-want`
3657 feature of the protocol version 2 `fetch` command. This feature
3658 is intended for the benefit of load-balanced servers which may
3659 not have the same view of what OIDs their refs point to due to
3660 replication delay.
3662 url.<base>.insteadOf::
3663 Any URL that starts with this value will be rewritten to
3664 start, instead, with <base>. In cases where some site serves a
3665 large number of repositories, and serves them with multiple
3666 access methods, and some users need to use different access
3667 methods, this feature allows people to specify any of the
3668 equivalent URLs and have Git automatically rewrite the URL to
3669 the best alternative for the particular user, even for a
3670 never-before-seen repository on the site. When more than one
3671 insteadOf strings match a given URL, the longest match is used.
3672 +
3673 Note that any protocol restrictions will be applied to the rewritten
3674 URL. If the rewrite changes the URL to use a custom protocol or remote
3675 helper, you may need to adjust the `protocol.*.allow` config to permit
3676 the request. In particular, protocols you expect to use for submodules
3677 must be set to `always` rather than the default of `user`. See the
3678 description of `protocol.allow` above.
3680 url.<base>.pushInsteadOf::
3681 Any URL that starts with this value will not be pushed to;
3682 instead, it will be rewritten to start with <base>, and the
3683 resulting URL will be pushed to. In cases where some site serves
3684 a large number of repositories, and serves them with multiple
3685 access methods, some of which do not allow push, this feature
3686 allows people to specify a pull-only URL and have Git
3687 automatically use an appropriate URL to push, even for a
3688 never-before-seen repository on the site. When more than one
3689 pushInsteadOf strings match a given URL, the longest match is
3690 used. If a remote has an explicit pushurl, Git will ignore this
3691 setting for that remote.
3693 user.email::
3694 Your email address to be recorded in any newly created commits.
3695 Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and
3696 `EMAIL` environment variables. See linkgit:git-commit-tree[1].
3698 user.name::
3699 Your full name to be recorded in any newly created commits.
3700 Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME`
3701 environment variables. See linkgit:git-commit-tree[1].
3703 user.useConfigOnly::
3704 Instruct Git to avoid trying to guess defaults for `user.email`
3705 and `user.name`, and instead retrieve the values only from the
3706 configuration. For example, if you have multiple email addresses
3707 and would like to use a different one for each repository, then
3708 with this configuration option set to `true` in the global config
3709 along with a name, Git will prompt you to set up an email before
3710 making new commits in a newly cloned repository.
3711 Defaults to `false`.
3713 user.signingKey::
3714 If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
3715 key you want it to automatically when creating a signed tag or
3716 commit, you can override the default selection with this variable.
3717 This option is passed unchanged to gpg's --local-user parameter,
3718 so you may specify a key using any method that gpg supports.
3720 versionsort.prereleaseSuffix (deprecated)::
3721 Deprecated alias for `versionsort.suffix`. Ignored if
3722 `versionsort.suffix` is set.
3724 versionsort.suffix::
3725 Even when version sort is used in linkgit:git-tag[1], tagnames
3726 with the same base version but different suffixes are still sorted
3727 lexicographically, resulting e.g. in prerelease tags appearing
3728 after the main release (e.g. "1.0-rc1" after "1.0"). This
3729 variable can be specified to determine the sorting order of tags
3730 with different suffixes.
3731 +
3732 By specifying a single suffix in this variable, any tagname containing
3733 that suffix will appear before the corresponding main release. E.g. if
3734 the variable is set to "-rc", then all "1.0-rcX" tags will appear before
3735 "1.0". If specified multiple times, once per suffix, then the order of
3736 suffixes in the configuration will determine the sorting order of tagnames
3737 with those suffixes. E.g. if "-pre" appears before "-rc" in the
3738 configuration, then all "1.0-preX" tags will be listed before any
3739 "1.0-rcX" tags. The placement of the main release tag relative to tags
3740 with various suffixes can be determined by specifying the empty suffix
3741 among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
3742 "-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags
3743 are listed first, followed by "v4.8", then "v4.8-ckX" and finally
3744 "v4.8-bfsX".
3745 +
3746 If more than one suffixes match the same tagname, then that tagname will
3747 be sorted according to the suffix which starts at the earliest position in
3748 the tagname. If more than one different matching suffixes start at
3749 that earliest position, then that tagname will be sorted according to the
3750 longest of those suffixes.
3751 The sorting order between different suffixes is undefined if they are
3752 in multiple config files.
3754 web.browser::
3755 Specify a web browser that may be used by some commands.
3756 Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
3757 may use it.
3759 worktree.guessRemote::
3760 With `add`, if no branch argument, and neither of `-b` nor
3761 `-B` nor `--detach` are given, the command defaults to
3762 creating a new branch from HEAD. If `worktree.guessRemote` is
3763 set to true, `worktree add` tries to find a remote-tracking
3764 branch whose name uniquely matches the new branch name. If
3765 such a branch exists, it is checked out and set as "upstream"
3766 for the new branch. If no such match can be found, it falls
3767 back to creating a new branch from the current HEAD.