Typos: t/README
[git/git.git] / t / README
CommitLineData
986aa7f1
JH
1Core GIT Tests
2==============
3
4This directory holds many test scripts for core GIT tools. The
5first part of this short document describes how to run the tests
6and read their output.
7
8When fixing the tools or adding enhancements, you are strongly
9encouraged to add tests in this directory to cover what you are
10trying to fix or enhance. The later part of this short document
11describes how your test scripts should be organized.
12
13
14Running Tests
15-------------
16
17The easiest way to run tests is to say "make". This runs all
18the tests.
19
20 *** t0000-basic.sh ***
5099b99d
ÆAB
21 ok 1 - .git/objects should be empty after git init in an empty repo.
22 ok 2 - .git/objects should have 3 subdirectories.
23 ok 3 - success is reported like this
986aa7f1 24 ...
5099b99d
ÆAB
25 ok 43 - very long name in the index handled sanely
26 # fixed 1 known breakage(s)
27 # still have 1 known breakage(s)
28 # passed all remaining 42 test(s)
29 1..43
30 *** t0001-init.sh ***
31 ok 1 - plain
32 ok 2 - plain with GIT_WORK_TREE
33 ok 3 - plain bare
34
35Since the tests all output TAP (see http://testanything.org) they can
85b0b34e 36be run with any TAP harness. Here's an example of parallel testing
5099b99d
ÆAB
37powered by a recent version of prove(1):
38
39 $ prove --timer --jobs 15 ./t[0-9]*.sh
40 [19:17:33] ./t0005-signals.sh ................................... ok 36 ms
41 [19:17:33] ./t0022-crlf-rename.sh ............................... ok 69 ms
42 [19:17:33] ./t0024-crlf-archive.sh .............................. ok 154 ms
43 [19:17:33] ./t0004-unwritable.sh ................................ ok 289 ms
44 [19:17:33] ./t0002-gitfile.sh ................................... ok 480 ms
45 ===( 102;0 25/? 6/? 5/? 16/? 1/? 4/? 2/? 1/? 3/? 1... )===
46
47prove and other harnesses come with a lot of useful options. The
48--state option in particular is very useful:
49
50 # Repeat until no more failures
51 $ prove -j 15 --state=failed,save ./t[0-9]*.sh
986aa7f1 52
28d836c8
MG
53You can give DEFAULT_TEST_TARGET=prove on the make command (or define it
54in config.mak) to cause "make test" to run tests under prove.
55GIT_PROVE_OPTS can be used to pass additional options, e.g.
56
57 $ make DEFAULT_TEST_TARGET=prove GIT_PROVE_OPTS='--timer --jobs 16' test
58
5099b99d 59You can also run each test individually from command line, like this:
986aa7f1 60
5099b99d
ÆAB
61 $ sh ./t3010-ls-files-killed-modified.sh
62 ok 1 - git update-index --add to add various paths.
63 ok 2 - git ls-files -k to show killed files.
64 ok 3 - validate git ls-files -k output.
65 ok 4 - git ls-files -m to show modified files.
66 ok 5 - validate git ls-files -m output.
67 # passed all 5 test(s)
68 1..5
986aa7f1
JH
69
70You can pass --verbose (or -v), --debug (or -d), and --immediate
4e1be63c
JS
71(or -i) command line argument to the test, or by setting GIT_TEST_OPTS
72appropriately before running "make".
986aa7f1
JH
73
74--verbose::
75 This makes the test more verbose. Specifically, the
76 command being run and their output if any are also
77 output.
78
79--debug::
80 This may help the person who is developing a new test.
81 It causes the command defined with test_debug to run.
82
83--immediate::
84 This causes the test to immediately exit upon the first
85 failed test.
86
5e2c08c6
LW
87--long-tests::
88 This causes additional long-running tests to be run (where
89 available), for more exhaustive testing.
90
4e1be63c
JS
91--valgrind::
92 Execute all Git binaries with valgrind and exit with status
93 126 on errors (just like regular tests, this will only stop
94 the test script when running under -i). Valgrind errors
95 go to stderr, so you might want to pass the -v option, too.
986aa7f1 96
3da93652
JS
97 Since it makes no sense to run the tests with --valgrind and
98 not see any output, this option implies --verbose. For
99 convenience, it also implies --tee.
100
9aec68d3
CMN
101 Note that valgrind is run with the option --leak-check=no,
102 as the git process is short-lived and some errors are not
103 interesting. In order to run a single command under the same
104 conditions manually, you should set GIT_VALGRIND to point to
105 the 't/valgrind/' directory and use the commands under
106 't/valgrind/bin/'.
107
44138559
JS
108--tee::
109 In addition to printing the test output to the terminal,
110 write it to files named 't/test-results/$TEST_NAME.out'.
111 As the names depend on the tests' file names, it is safe to
112 run the tests with this option in parallel.
113
e4597aae
MO
114--with-dashes::
115 By default tests are run without dashed forms of
116 commands (like git-commit) in the PATH (it only uses
117 wrappers from ../bin-wrappers). Use this option to include
118 the build directory (..) in the PATH, which contains all
119 the dashed forms of commands. This option is currently
120 implied by other options like --valgrind and
121 GIT_TEST_INSTALLED.
122
0d4dbcd3
TR
123--root=<directory>::
124 Create "trash" directories used to store all temporary data during
125 testing under <directory>, instead of the t/ directory.
126 Using this option with a RAM-based filesystem (such as tmpfs)
127 can massively speed up the test suite.
128
e160da7f
MO
129You can also set the GIT_TEST_INSTALLED environment variable to
130the bindir of an existing git installation to test that installation.
131You still need to have built this git sandbox, from which various
132test-* support programs, templates, and perl libraries are used.
133If your installed git is incomplete, it will silently test parts of
134your built version instead.
135
136When using GIT_TEST_INSTALLED, you can also set GIT_TEST_EXEC_PATH to
137override the location of the dashed-form subcommands (what
138GIT_EXEC_PATH would be used for during normal operation).
139GIT_TEST_EXEC_PATH defaults to `$GIT_TEST_INSTALLED/git --exec-path`.
140
141
fbd458a3
JN
142Skipping Tests
143--------------
144
145In some environments, certain tests have no way of succeeding
146due to platform limitation, such as lack of 'unzip' program, or
147filesystem that do not allow arbitrary sequence of non-NUL bytes
148as pathnames.
149
150You should be able to say something like
151
152 $ GIT_SKIP_TESTS=t9200.8 sh ./t9200-git-cvsexport-commit.sh
153
154and even:
155
156 $ GIT_SKIP_TESTS='t[0-4]??? t91?? t9200.8' make
157
158to omit such tests. The value of the environment variable is a
159SP separated list of patterns that tells which tests to skip,
160and either can match the "t[0-9]{4}" part to skip the whole
161test, or t[0-9]{4} followed by ".$number" to say which
162particular test to skip.
163
164Note that some tests in the existing test suite rely on previous
165test item, so you cannot arbitrarily disable one and expect the
166remainder of test to check what the test originally was intended
167to check.
168
169
f50c9f76
PB
170Naming Tests
171------------
172
173The test files are named as:
174
175 tNNNN-commandname-details.sh
176
177where N is a decimal digit.
178
179First digit tells the family:
180
181 0 - the absolute basics and global stuff
182 1 - the basic commands concerning database
183 2 - the basic commands concerning the working tree
184 3 - the other basic commands (e.g. ls-files)
185 4 - the diff commands
186 5 - the pull and exporting commands
187 6 - the revision tree commands (even e.g. merge-base)
8f4a9b62 188 7 - the porcelainish commands concerning the working tree
8757749e
JN
189 8 - the porcelainish commands concerning forensics
190 9 - the git tools
f50c9f76
PB
191
192Second digit tells the particular command we are testing.
193
194Third digit (optionally) tells the particular switch or group of switches
195we are testing.
196
77656600
JH
197If you create files under t/ directory (i.e. here) that is not
198the top-level test script, never name the file to match the above
199pattern. The Makefile here considers all such files as the
63d32945 200top-level test script and tries to run all of them. Care is
77656600
JH
201especially needed if you are creating a common test library
202file, similar to test-lib.sh, because such a library file may
203not be suitable for standalone execution.
204
f50c9f76 205
986aa7f1
JH
206Writing Tests
207-------------
208
209The test script is written as a shell script. It should start
210with the standard "#!/bin/sh" with copyright notices, and an
211assignment to variable 'test_description', like this:
212
213 #!/bin/sh
214 #
215 # Copyright (c) 2005 Junio C Hamano
216 #
217
14cd1ff3 218 test_description='xxx test (option --frotz)
986aa7f1
JH
219
220 This test registers the following structure in the cache
221 and tries to run git-ls-files with option --frotz.'
222
f50c9f76 223
986aa7f1
JH
224Source 'test-lib.sh'
225--------------------
226
227After assigning test_description, the test script should source
228test-lib.sh like this:
229
230 . ./test-lib.sh
231
232This test harness library does the following things:
233
234 - If the script is invoked with command line argument --help
235 (or -h), it shows the test_description and exits.
236
e1ca1c9d
ÆAB
237 - Creates an empty test directory with an empty .git/objects database
238 and chdir(2) into it. This directory is 't/trash
239 directory.$test_name_without_dotsh', with t/ subject to change by
240 the --root option documented above.
986aa7f1
JH
241
242 - Defines standard test helper functions for your scripts to
243 use. These functions are designed to make all scripts behave
244 consistently when command line arguments --verbose (or -v),
245 --debug (or -d), and --immediate (or -i) is given.
246
20873f45
ÆAB
247Do's, don'ts & things to keep in mind
248-------------------------------------
249
6fd45295 250Here are a few examples of things you probably should and shouldn't do
20873f45
ÆAB
251when writing tests.
252
253Do:
254
6fd45295 255 - Put all code inside test_expect_success and other assertions.
20873f45
ÆAB
256
257 Even code that isn't a test per se, but merely some setup code
6fd45295 258 should be inside a test assertion.
20873f45
ÆAB
259
260 - Chain your test assertions
261
262 Write test code like this:
263
264 git merge foo &&
265 git push bar &&
266 test ...
267
268 Instead of:
269
270 git merge hla
271 git push gh
272 test ...
273
274 That way all of the commands in your tests will succeed or fail. If
00648ba0
EN
275 you must ignore the return value of something, consider using a
276 helper function (e.g. use sane_unset instead of unset, in order
277 to avoid unportable return value for unsetting a variable that was
278 already unset), or prepending the command with test_might_fail or
279 test_must_fail.
20873f45 280
0c357544
ÆAB
281 - Check the test coverage for your tests. See the "Test coverage"
282 below.
283
63d32945
MW
284 Don't blindly follow test coverage metrics; if a new function you added
285 doesn't have any coverage, then you're probably doing something wrong,
e8b55f5c
ÆAB
286 but having 100% coverage doesn't necessarily mean that you tested
287 everything.
288
289 Tests that are likely to smoke out future regressions are better
290 than tests that just inflate the coverage metrics.
291
95b104c8
JS
292 - When a test checks for an absolute path that a git command generated,
293 construct the expected value using $(pwd) rather than $PWD,
294 $TEST_DIRECTORY, or $TRASH_DIRECTORY. It makes a difference on
295 Windows, where the shell (MSYS bash) mangles absolute path names.
296 For details, see the commit message of 4114156ae9.
297
20873f45
ÆAB
298Don't:
299
300 - exit() within a <script> part.
301
302 The harness will catch this as a programming error of the test.
303 Use test_done instead if you need to stop the tests early (see
304 "Skipping tests" below).
305
306 - Break the TAP output
307
6fd45295
JH
308 The raw output from your test may be interpreted by a TAP harness. TAP
309 harnesses will ignore everything they don't know about, but don't step
310 on their toes in these areas:
20873f45
ÆAB
311
312 - Don't print lines like "$x..$y" where $x and $y are integers.
313
314 - Don't print lines that begin with "ok" or "not ok".
315
6fd45295 316 TAP harnesses expect a line that begins with either "ok" and "not
20873f45
ÆAB
317 ok" to signal a test passed or failed (and our harness already
318 produces such lines), so your script shouldn't emit such lines to
319 their output.
320
321 You can glean some further possible issues from the TAP grammar
322 (see http://search.cpan.org/perldoc?TAP::Parser::Grammar#TAP_Grammar)
323 but the best indication is to just run the tests with prove(1),
324 it'll complain if anything is amiss.
325
326Keep in mind:
327
6fd45295 328 - Inside <script> part, the standard output and standard error
20873f45
ÆAB
329 streams are discarded, and the test harness only reports "ok" or
330 "not ok" to the end user running the tests. Under --verbose, they
331 are shown to help debugging the tests.
332
333
b5500d16
ÆAB
334Skipping tests
335--------------
336
681186ae 337If you need to skip tests you should do so by using the three-arg form
99d9050d
ÆAB
338of the test_* functions (see the "Test harness library" section
339below), e.g.:
340
341 test_expect_success PERL 'I need Perl' "
342 '$PERL_PATH' -e 'hlagh() if unf_unf()'
343 "
344
345The advantage of skipping tests like this is that platforms that don't
346have the PERL and other optional dependencies get an indication of how
347many tests they're missing.
348
349If the test code is too hairy for that (i.e. does a lot of setup work
350outside test assertions) you can also skip all remaining tests by
351setting skip_all and immediately call test_done:
b5500d16
ÆAB
352
353 if ! test_have_prereq PERL
354 then
355 skip_all='skipping perl interface tests, perl not available'
356 test_done
357 fi
14cd1ff3 358
99d9050d
ÆAB
359The string you give to skip_all will be used as an explanation for why
360the test was skipped.
361
986aa7f1
JH
362End with test_done
363------------------
364
365Your script will be a sequence of tests, using helper functions
366from the test harness library. At the end of the script, call
367'test_done'.
368
369
370Test harness library
371--------------------
372
373There are a handful helper functions defined in the test harness
374library for your script to use.
375
9a897893 376 - test_expect_success [<prereq>] <message> <script>
986aa7f1 377
9a897893 378 Usually takes two strings as parameter, and evaluates the
986aa7f1
JH
379 <script>. If it yields success, test is considered
380 successful. <message> should state what it is testing.
381
382 Example:
383
384 test_expect_success \
385 'git-write-tree should be able to write an empty tree.' \
386 'tree=$(git-write-tree)'
387
9a897893
ÆAB
388 If you supply three parameters the first will be taken to be a
389 prerequisite, see the test_set_prereq and test_have_prereq
390 documentation below:
391
392 test_expect_success TTY 'git --paginate rev-list uses a pager' \
393 ' ... '
394
93a57246
ÆAB
395 You can also supply a comma-separated list of prerequisites, in the
396 rare case where your test depends on more than one:
397
398 test_expect_success PERL,PYTHON 'yo dawg' \
399 ' test $(perl -E 'print eval "1 +" . qx[python -c "print 2"]') == "4" '
400
9a897893 401 - test_expect_failure [<prereq>] <message> <script>
986aa7f1 402
41ac414e
JH
403 This is NOT the opposite of test_expect_success, but is used
404 to mark a test that demonstrates a known breakage. Unlike
405 the usual test_expect_success tests, which say "ok" on
406 success and "FAIL" on failure, this will say "FIXED" on
407 success and "still broken" on failure. Failures from these
408 tests won't cause -i (immediate) to stop.
986aa7f1 409
9a897893
ÆAB
410 Like test_expect_success this function can optionally use a three
411 argument invocation with a prerequisite as the first argument.
412
986aa7f1
JH
413 - test_debug <script>
414
415 This takes a single argument, <script>, and evaluates it only
416 when the test script is started with --debug command line
417 argument. This is primarily meant for use during the
418 development of a new test script.
419
420 - test_done
421
422 Your test script must have test_done at the end. Its purpose
423 is to summarize successes and failures in the test script and
424 exit with an appropriate error code.
425
00884968
JS
426 - test_tick
427
428 Make commit and tag names consistent by setting the author and
63d32945 429 committer times to defined state. Subsequent calls will
00884968
JS
430 advance the times by a fixed amount.
431
432 - test_commit <message> [<filename> [<contents>]]
433
434 Creates a commit with the given message, committing the given
435 file with the given contents (default for both is to reuse the
436 message string), and adds a tag (again reusing the message
437 string as name). Calls test_tick to make the SHA-1s
438 reproducible.
439
440 - test_merge <message> <commit-or-tag>
441
442 Merges the given rev using the given message. Like test_commit,
443 creates a tag and calls test_tick before committing.
986aa7f1 444
9a897893
ÆAB
445 - test_set_prereq SOME_PREREQ
446
447 Set a test prerequisite to be used later with test_have_prereq. The
be53deef
ÆAB
448 test-lib will set some prerequisites for you, see the
449 "Prerequisites" section below for a full list of these.
450
451 Others you can set yourself and use later with either
452 test_have_prereq directly, or the three argument invocation of
453 test_expect_success and test_expect_failure.
9a897893
ÆAB
454
455 - test_have_prereq SOME PREREQ
456
457 Check if we have a prerequisite previously set with
458 test_set_prereq. The most common use of this directly is to skip
459 all the tests if we don't have some essential prerequisite:
460
461 if ! test_have_prereq PERL
462 then
463 skip_all='skipping perl interface tests, perl not available'
464 test_done
465 fi
466
2fac6a4b
ÆAB
467 - test_external [<prereq>] <message> <external> <script>
468
469 Execute a <script> with an <external> interpreter (like perl). This
470 was added for tests like t9700-perl-git.sh which do most of their
471 work in an external test script.
472
473 test_external \
474 'GitwebCache::*FileCache*' \
475 "$PERL_PATH" "$TEST_DIRECTORY"/t9503/test_cache_interface.pl
476
477 If the test is outputting its own TAP you should set the
478 test_external_has_tap variable somewhere before calling the first
479 test_external* function. See t9700-perl-git.sh for an example.
480
481 # The external test will outputs its own plan
482 test_external_has_tap=1
483
484 - test_external_without_stderr [<prereq>] <message> <external> <script>
485
486 Like test_external but fail if there's any output on stderr,
487 instead of checking the exit code.
488
489 test_external_without_stderr \
490 'Perl API' \
491 "$PERL_PATH" "$TEST_DIRECTORY"/t9700/test.pl
492
892e6f7e
ÆAB
493 - test_expect_code <exit-code> <command>
494
495 Run a command and ensure that it exits with the given exit code.
496 For example:
497
498 test_expect_success 'Merge with d/f conflicts' '
499 test_expect_code 1 git merge "merge msg" B master
500 '
501
c9667456
JN
502 - test_must_fail <git-command>
503
504 Run a git command and ensure it fails in a controlled way. Use
971ecbd1
BC
505 this instead of "! <git-command>". When git-command dies due to a
506 segfault, test_must_fail diagnoses it as an error; "! <git-command>"
507 treats it as just another expected failure, which would let such a
508 bug go unnoticed.
c9667456
JN
509
510 - test_might_fail <git-command>
511
512 Similar to test_must_fail, but tolerate success, too. Use this
513 instead of "<git-command> || :" to catch failures due to segv.
514
515 - test_cmp <expected> <actual>
516
517 Check whether the content of the <actual> file matches the
518 <expected> file. This behaves like "cmp" but produces more
519 helpful output when the test is run with "-v" option.
520
fb3340a6
JN
521 - test_line_count (= | -lt | -ge | ...) <length> <file>
522
523 Check whether a file has the length it is expected to.
524
2caf20c5
MM
525 - test_path_is_file <file> [<diagnosis>]
526 test_path_is_dir <dir> [<diagnosis>]
527 test_path_is_missing <path> [<diagnosis>]
528
529 Check whether a file/directory exists or doesn't. <diagnosis> will
530 be displayed if the test fails.
531
c9667456
JN
532 - test_when_finished <script>
533
534 Prepend <script> to a list of commands to run to clean up
535 at the end of the current test. If some clean-up command
536 fails, the test will not pass.
537
538 Example:
539
540 test_expect_success 'branch pointing to non-commit' '
541 git rev-parse HEAD^{tree} >.git/refs/heads/invalid &&
542 test_when_finished "git update-ref -d refs/heads/invalid" &&
543 ...
544 '
545
be53deef
ÆAB
546Prerequisites
547-------------
548
549These are the prerequisites that the test library predefines with
550test_have_prereq.
551
552See the prereq argument to the test_* functions in the "Test harness
553library" section above and the "test_have_prereq" function for how to
554use these, and "test_set_prereq" for how to define your own.
555
556 - PERL & PYTHON
557
558 Git wasn't compiled with NO_PERL=YesPlease or
559 NO_PYTHON=YesPlease. Wrap any tests that need Perl or Python in
560 these.
561
562 - POSIXPERM
563
564 The filesystem supports POSIX style permission bits.
565
566 - BSLASHPSPEC
567
568 Backslashes in pathspec are not directory separators. This is not
569 set on Windows. See 6fd1106a for details.
570
571 - EXECKEEPSPID
572
573 The process retains the same pid across exec(2). See fb9a2bea for
574 details.
575
576 - SYMLINKS
577
578 The filesystem we're on supports symbolic links. E.g. a FAT
579 filesystem doesn't support these. See 704a3143 for details.
2fac6a4b 580
c91cfd19
ÆAB
581 - SANITY
582
583 Test is not run by root user, and an attempt to write to an
584 unwritable file is expected to fail correctly.
2fac6a4b 585
986aa7f1
JH
586Tips for Writing Tests
587----------------------
588
589As with any programming projects, existing programs are the best
590source of the information. However, do _not_ emulate
591t0000-basic.sh when writing your tests. The test is special in
592that it tries to validate the very core of GIT. For example, it
593knows that there will be 256 subdirectories under .git/objects/,
594and it knows that the object ID of an empty tree is a certain
59540-byte string. This is deliberately done so in t0000-basic.sh
596because the things the very basic core test tries to achieve is
597to serve as a basis for people who are changing the GIT internal
598drastically. For these people, after making certain changes,
599not seeing failures from the basic test _is_ a failure. And
600such drastic changes to the core GIT that even changes these
601otherwise supposedly stable object IDs should be accompanied by
602an update to t0000-basic.sh.
603
604However, other tests that simply rely on basic parts of the core
605GIT working properly should not have that level of intimate
606knowledge of the core GIT internals. If all the test scripts
607hardcoded the object IDs like t0000-basic.sh does, that defeats
608the purpose of t0000-basic.sh, which is to isolate that level of
609validation in one place. Your test also ends up needing
610updating when such a change to the internal happens, so do _not_
611do it and leave the low level of validation to t0000-basic.sh.
d15e9ebc 612
0c357544
ÆAB
613Test coverage
614-------------
615
616You can use the coverage tests to find code paths that are not being
617used or properly exercised yet.
618
619To do that, run the coverage target at the top-level (not in the t/
620directory):
621
622 make coverage
623
624That'll compile Git with GCC's coverage arguments, and generate a test
625report with gcov after the tests finish. Running the coverage tests
626can take a while, since running the tests in parallel is incompatible
627with GCC's coverage mode.
628
629After the tests have run you can generate a list of untested
630functions:
631
632 make coverage-untested-functions
633
634You can also generate a detailed per-file HTML report using the
635Devel::Cover module. To install it do:
636
637 # On Debian or Ubuntu:
638 sudo aptitude install libdevel-cover-perl
639
640 # From the CPAN with cpanminus
641 curl -L http://cpanmin.us | perl - --sudo --self-upgrade
642 cpanm --sudo Devel::Cover
643
644Then, at the top-level:
645
646 make cover_db_html
647
648That'll generate a detailed cover report in the "cover_db_html"
649directory, which you can then copy to a webserver, or inspect locally
650in a browser.
651
d15e9ebc
ÆAB
652Smoke testing
653-------------
654
655The Git test suite has support for smoke testing. Smoke testing is
656when you submit the results of a test run to a central server for
657analysis and aggregation.
658
659Running a smoke tester is an easy and valuable way of contributing to
660Git development, particularly if you have access to an uncommon OS on
661obscure hardware.
662
663After building Git you can generate a smoke report like this in the
664"t" directory:
665
666 make clean smoke
667
668You can also pass arguments via the environment. This should make it
669faster:
670
671 GIT_TEST_OPTS='--root=/dev/shm' TEST_JOBS=10 make clean smoke
672
673The "smoke" target will run the Git test suite with Perl's
674"TAP::Harness" module, and package up the results in a .tar.gz archive
675with "TAP::Harness::Archive". The former is included with Perl v5.10.1
676or later, but you'll need to install the latter from the CPAN. See the
677"Test coverage" section above for how you might do that.
678
679Once the "smoke" target finishes you'll see a message like this:
680
681 TAP Archive created at <path to git>/t/test-results/git-smoke.tar.gz
682
683To upload the smoke report you need to have curl(1) installed, then
684do:
685
686 make smoke_report
687
688To upload the report anonymously. Hopefully that'll return something
689like "Reported #7 added.".
690
691If you're going to be uploading reports frequently please request a
692user account by E-Mailing gitsmoke@v.nix.is. Once you have a username
693and password you'll be able to do:
694
695 SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> make smoke_report
696
e38efac8
ÆAB
697You can also add an additional comment to attach to the report, and/or
698a comma separated list of tags:
699
700 SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> \
701 SMOKE_COMMENT=<comment> SMOKE_TAGS=<tags> \
702 make smoke_report
703
d15e9ebc
ÆAB
704Once the report is uploaded it'll be made available at
705http://smoke.git.nix.is, here's an overview of Recent Smoke Reports
706for Git:
707
708 http://smoke.git.nix.is/app/projects/smoke_reports/1
709
710The reports will also be mirrored to GitHub every few hours:
711
712 http://github.com/gitsmoke/smoke-reports
713
714The Smolder SQLite database is also mirrored and made available for
715download:
716
717 http://github.com/gitsmoke/smoke-database
718
719Note that the database includes hashed (with crypt()) user passwords
720and E-Mail addresses. Don't use a valuable password for the smoke
721service if you have an account, or an E-Mail address you don't want to
722be publicly known. The user accounts are just meant to be convenient
723labels, they're not meant to be secure.